عن الملكية الفكرية التدريب في مجال الملكية الفكرية إذكاء الاحترام للملكية الفكرية التوعية بالملكية الفكرية الملكية الفكرية لفائدة… الملكية الفكرية و… الملكية الفكرية في… معلومات البراءات والتكنولوجيا معلومات العلامات التجارية معلومات التصاميم الصناعية معلومات المؤشرات الجغرافية معلومات الأصناف النباتية (الأوبوف) القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية مراجع الملكية الفكرية تقارير الملكية الفكرية حماية البراءات حماية العلامات التجارية حماية التصاميم الصناعية حماية المؤشرات الجغرافية حماية الأصناف النباتية (الأوبوف) تسوية المنازعات المتعلقة بالملكية الفكرية حلول الأعمال التجارية لمكاتب الملكية الفكرية دفع ثمن خدمات الملكية الفكرية هيئات صنع القرار والتفاوض التعاون التنموي دعم الابتكار الشراكات بين القطاعين العام والخاص أدوات وخدمات الذكاء الاصطناعي المنظمة العمل مع الويبو المساءلة البراءات العلامات التجارية التصاميم الصناعية المؤشرات الجغرافية حق المؤلف الأسرار التجارية أكاديمية الويبو الندوات وحلقات العمل إنفاذ الملكية الفكرية WIPO ALERT إذكاء الوعي اليوم العالمي للملكية الفكرية مجلة الويبو دراسات حالة وقصص ناجحة في مجال الملكية الفكرية أخبار الملكية الفكرية جوائز الويبو الأعمال الجامعات الشعوب الأصلية الأجهزة القضائية الموارد الوراثية والمعارف التقليدية وأشكال التعبير الثقافي التقليدي الاقتصاد التمويل الأصول غير الملموسة المساواة بين الجنسين الصحة العالمية تغير المناخ سياسة المنافسة أهداف التنمية المستدامة التكنولوجيات الحدودية التطبيقات المحمولة الرياضة السياحة ركن البراءات تحليلات البراءات التصنيف الدولي للبراءات أَردي – البحث لأغراض الابتكار أَردي – البحث لأغراض الابتكار قاعدة البيانات العالمية للعلامات مرصد مدريد قاعدة بيانات المادة 6(ثالثاً) تصنيف نيس تصنيف فيينا قاعدة البيانات العالمية للتصاميم نشرة التصاميم الدولية قاعدة بيانات Hague Express تصنيف لوكارنو قاعدة بيانات Lisbon Express قاعدة البيانات العالمية للعلامات الخاصة بالمؤشرات الجغرافية قاعدة بيانات الأصناف النباتية (PLUTO) قاعدة بيانات الأجناس والأنواع (GENIE) المعاهدات التي تديرها الويبو ويبو لكس - القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية معايير الويبو إحصاءات الملكية الفكرية ويبو بورل (المصطلحات) منشورات الويبو البيانات القطرية الخاصة بالملكية الفكرية مركز الويبو للمعارف الاتجاهات التكنولوجية للويبو مؤشر الابتكار العالمي التقرير العالمي للملكية الفكرية معاهدة التعاون بشأن البراءات – نظام البراءات الدولي ePCT بودابست – نظام الإيداع الدولي للكائنات الدقيقة مدريد – النظام الدولي للعلامات التجارية eMadrid الحماية بموجب المادة 6(ثالثاً) (الشعارات الشرفية، الأعلام، شعارات الدول) لاهاي – النظام الدولي للتصاميم eHague لشبونة – النظام الدولي لتسميات المنشأ والمؤشرات الجغرافية eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange الوساطة التحكيم قرارات الخبراء المنازعات المتعلقة بأسماء الحقول نظام النفاذ المركزي إلى نتائج البحث والفحص (CASE) خدمة النفاذ الرقمي (DAS) WIPO Pay الحساب الجاري لدى الويبو جمعيات الويبو اللجان الدائمة الجدول الزمني للاجتماعات WIPO Webcast وثائق الويبو الرسمية أجندة التنمية المساعدة التقنية مؤسسات التدريب في مجال الملكية الفكرية الدعم المتعلق بكوفيد-19 الاستراتيجيات الوطنية للملكية الفكرية المساعدة في مجالي السياسة والتشريع محور التعاون مراكز دعم التكنولوجيا والابتكار نقل التكنولوجيا برنامج مساعدة المخترعين WIPO GREEN WIPO's PAT-INFORMED اتحاد الكتب الميسّرة اتحاد الويبو للمبدعين WIPO Translate أداة تحويل الكلام إلى نص مساعد التصنيف الدول الأعضاء المراقبون المدير العام الأنشطة بحسب كل وحدة المكاتب الخارجية المناصب الشاغرة المشتريات النتائج والميزانية التقارير المالية الرقابة
Arabic English Spanish French Russian Chinese
القوانين المعاهدات الأحكام التصفح بحسب الاختصاص القضائي

لائحة الرسوم والنماذج الصناعية لعام 2010 (تعديل) (الصك القانوني رقم 396 لسنة 2010)، إيرلندا

عودة للخلف
أحدث إصدار في ويبو لِكس
التفاصيل التفاصيل سنة الإصدار 2010 تواريخ بدء النفاذ : 4 أكتوبر 2010 نص صادر : 11 أغسطس 2010 نوع النص اللوائح التنفيذية الموضوع التصاميم الصناعية ملاحظات These Regulations (S.I. No. 396/2010) are Oireachtas Copyright Material and are reproduced with the permission of the Houses of the Oireachtas (©Government of Ireland).

المواد المتاحة

النصوص الرئيسية النصوص ذات الصلة
النصوص الرئيسية النصوص الرئيسية بالإنكليزية Industrial Designs (Amendment) Regulations 2010 (S.I. No. 396/2010)        
Industrial Designs (Amendment) Regulations 2010 - S.I. No. 396 of 2010


STATUTORY INSTRUMENTS

S.I. No. 396 of 2010

————————
INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2010

(Prn. A10/1234)

2 [396]
S.I. No. 396 of 2010
INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2010
I, CONOR LENIHAN, Minister of State at the Department of Enterprise, Trade and Innovation, in exercise of the powers conferred on me by sections
20(1), 30(1), 31(1) and 85 of the Industrial Designs Act 2001 (No. 39 of 2001) (as adapted by the Enterprise, Trade and Employment (Alteration of Name of Department and Title of Minister) Order 2010 (S.I. No. 185 of 2010)) and the Enterprise, Trade and Innovation (Delegation of Ministerial Functions) Order
2010 (S.I. No. 332 of 2010), hereby make the following regulations:
1. These Regulations may be cited as the Industrial Designs (Amendment) Regulations 2010 and come into operation on 4 October 2010.
2. The Industrial Designs Regulations 2002 (S.I. No. 280 of 2002) are amended—
(a) in Regulation 8(1) (as amended by Regulation 2 of the Industrial Designs (Amendment) Regulations 2007 (S.I. No. 620 of 2007)), by substituting “in a state which is a contracting party to the Agreement on the European Economic Area signed at Oporto on 2 May 1992, as amended for the time being,” for “in the European Union”, and
(b) in Schedule 2, by substituting—
(i) Form No. 1 in the Schedule to these Regulations for Form No. 1 (substituted by the Industrial Designs (Amendment) Regulations
2004 (S.I. No. 574 of 2004)), and
(ii) Form No. 1A in the Schedule to these Regulations for Form No.
1A (substituted by the Industrial Designs (Amendment) Regu­
lations 2004 (S.I. No. 574 of 2004)).

Notice of the making of this Statutory Instrument was published in

“Iris Oifigiúil” of 17th August, 2010.

[396] 3

SCHEDULE

FORM No. 1

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN SINGLE APPLICATION IN RESPCT OF ONE DESIGN

Reference No. of Applicant or

Authorised Agent......................

1. Applicant(s) (Full name and address of each person or company applying.)

Name(s)

Address(es)

Nationality(ies)

Telephone(s)

Email(s)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

2. Legal Representative (if any) (The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration.)

Name

Address

Phone

Email

4 [396]

3. Address for Service (within the EEA, to which correspondence is to be sent.)

If different to the address given at 1 or 2 above

Address

Phone

Email

Please tick box if you wish the Office to correspond with you by Email in relation to this application


4. Representations

A representation of the design complying with the conditions set out in Regulation 11 of the Industrial Designs Regulations 2002, is enclosed.


YES NO

5. Author(s)

(If there is more than one author (creator) of the design, insert here the name(s) and address(es) of the author(s).)

Name(s) of author(s)

Address(es)

[396] 5

6. Brief description of the design

7. Class(es) & Product(s)

Class(es)

(List here the class(es) including the subclass(es) of the Locarno system of International Classification in which registration of the design is requested.)

Product(s)

(List here the products to or in which the design is to be applied or incorporated.)

8. Priority

(If you have filed an application to register this Design outside the State within the last six months, please enter the relevant information here where a right to priority is claimed.)

State/Country/Territory/Area

Date

File Number (If available)

9. Deferment of Publication

(Is deferment of publication as provided for in Section 32(2) of the Principal Act requested? If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority.)


Yes No Period of deferment

6 [396]

10. Fee(s) accompanying the application.

Application fee to register a design

(€ )

Deferment fee for a period up to 12 months

(€ )

Deferment fee for a period from 12 to 24 months

(€ )

Deferment fee for a period from 24 to 30 months

(€ )

Total:

(€ )

11. Declaration and Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the legal representative named at 2.)

The Applicant(s) named herein claims to be the proprietor(s) of the design, a representation of which is attached, and requests the registration of the design on the basis of the foregoing information:

Signature

Name in BLOCK CAPITALS

If a company, state the position in the company of the person signing

Date

[396] 7

FORM No. 1A

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN MULTIPLE APPLICATION


This is a Multiple Application Reference No. of Applicant or covering (insert number) [ ] Authorised Agent.................... designs

1. Applicant(s) (Full name and address of each person or company applying.)

Name(s)

Address(es)

Nationality(ies)

Telephone(s)

Email(s)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

2. Legal Representative (if any) (The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration.)

Name

Address

Phone

Email

3. Address for Service (within the EEA, to which correspondence is to be sent.)

If different to the address given at 1 or 2 above

Address

Phone

Email


8 [396]

Please tick box if you wish the Office to correspond with you by Email in relation to this application

4. Representations



Separate representations of each of the designs, YES NO

complying with the conditions set out in Regulation 11

of the Industrial Designs Regulations 2002, are

enclosed.

[IMPORTANT PLEASE NOTE: THE REPRESENTATIONS ENCLOSED WITH THIS APPLICATION MUST BE NUMBERED CON­ SECUTIVELY USING ARABIC NUMERALS INSERTED ON THE BACK OR REVERSE SIDE OF THE REPRESENTATIONS. THESE NUMERALS ARE REQUIRED TO IDENTIFY AND DISTINGUISH THE DESIGNS IN RESPECT OF WHICH REGISTRATION IS REQUESTED. WHERE MORE THAN ONE REPRESENTATION OF A PARTICULAR DESIGN IS SUBMITTED, EACH OF THE REPRESENTATIONS OF THAT DESIGN SHOULD BE ASSIGNED THE SAME IDENTIFICATION NUMERAL.]

5. Author(s)
(If there is more than one author (creator) indicate the design identification numeral of each design (see 4 above) opposite the name and address of each author.)

Design Identification

Numeral(s)

Name of author(s)

Address(es)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

[396] 9

6. Brief description of designs

(Insert here a brief description of the designs. If you need to provide separate descriptions of each of the designs included in the application, indicate the design identification numeral of each design opposite each of the descriptions provided.)

Design Identification No.

Insert here a brief description of each design.

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

7. Class(es) & Product(s)

Design Identification No.

Class(es)

(List here the class(es) including the subclass(es) of the Locarno system of International Classification in which registration of the design(s) is/are requested.)

Product(s)

(List here the products to or in which the design is to be applied or incorporated.)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

[Note: Except in cases of ornamentation, all of the designs in a mul­ tiple application for registration must be in respect of products that belong to the same class of the Locarno system of International Clas­ sification.]

10 [396]

8. Priority

(If you have filed an application to register the same Designs outside the State within the last six months, please enter the relevant information here where a right to priority is claimed. If there are different claims to priority in respect of the different designs included in the application, indicate the design identifi­ cation numeral of each design opposite each of the claims listed.)

Design

Identification No.

State/Country/Territory/Area

Date

File Number (If available)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

9. Deferment of Publication

(Is deferment of publication as provided for in Section 32(2) of the Principal Act requested? If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority.)

Yes No

Design Identification No.

Period of Deferment

[396] 11

10. Fee(s) accompanying the application.

Application fee to register a design

(€ )

Additional fee (per design) in a multiple application

(€ )

Deferment fee for a period up to 12 months

(€ )

Deferment fee for a period from 12 to 24 months

(€ )

Deferment fee for a period from 24 to 30 months

(€ )

Total:

(€ )

11. Declaration and Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the legal representative named at 2.)

The Applicant(s) named herein claims to be the proprietor(s) of the designs, representations of which are attached, and requests the registration of the designs on the basis of the foregoing information:

Signature

Name in BLOCK CAPITALS

If a company, state the position in the company of the person signing

Date

GIVEN under my hand,
11 August 2010
CONOR LENIHAN,
Minister of State at the Department of Enterprise, Trade and Innovation.
12 [396]
EXPLANATORY NOTE.

(This note is not part of the Instrument and does not purport to be a legal interpretation.)

The Regulations make a slight change to the Industrial Design Regulations
2002 by clarifying that a person, involved in any proceeding before the Control­ ler of Patents, Designs and Trade Marks or a registered proprietor of a design, may have an address for service in the European Economic Area (EEA). The Regulations also amend Forms 1 and 1A in Schedule 2 to those Regulations by improving the layout of Forms 1 and 1A and also amending the address for service requirement to allow applicants to provide an address for service within the EEA.

BAILE ÁTHA CLIATH

ARNA FHOILSIÚ AG OIFIG AN tSOLÁTHAIR Le ceannach díreach ón

OIFIG DHÍOLTA FOILSEACHÁN RIALTAIS,

TEACH SUN ALLIANCE, SRÁID THEACH LAIGHEAN, BAILE ÁTHA CLIATH 2, nó tríd an bpost ó

FOILSEACHÁIN RIALTAIS, AN RANNÓG POST-TRÁCHTA,

AONAD 20 PÁIRC MIONDÍOLA COIS LOCHA, CLÁR CHLAINNE MHUIRIS, CONTAE MHAIGH EO,

(Teil: 01 - 6476834 nó 1890 213434; Fax: 094 - 9378964 nó 01 - 6476843)

nó trí aon díoltóir leabhar.

—————— DUBLIN

PUBLISHED BY THE STATIONERY OFFICE To be purchased directly from the

GOVERNMENT PUBLICATIONS SALE OFFICE

SUN ALLIANCE HOUSE, MOLESWORTH STREET, DUBLIN 2, or by mail order from

GOVERNMENT PUBLICATIONS, POSTAL TRADE SECTION, UNIT 20 LAKESIDE RETAIL PARK, CLAREMORRIS, CO. MAYO, (Tel: 01 - 6476834 or 1890 213434; Fax: 094 - 9378964 or 01 - 6476843)

or through any bookseller.

——————

€3.81

Wt. (B27536). 290. 8/10. Cahill. Gr. 30-15.

النصوص الإضافية ورقة غلاف الإخطار الموجه إلى منظمة التجارة العالمية (3 نصوص) ورقة غلاف الإخطار الموجه إلى منظمة التجارة العالمية (3 نصوص) بالفرنسية Règlement de 2010 portant modification du règlement sur les dessins et modèles industriels (S.I. nº 396 de 2010) بالإسبانية Reglamento de 2010 que modificada la Ley de Dibujos y Modelos Industriales (S.I. Nº 396/2010) بالإنكليزية Industrial Designs (Amendment) Regulations 2010 (S.I. No. 396/2010)
Industrial Designs (Amendment) Regulations 2010 - S.I. No. 396 of 2010


STATUTORY INSTRUMENTS

S.I. No. 396 of 2010

————————
INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2010

(Prn. A10/1234)

2 [396]
S.I. No. 396 of 2010
INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2010
I, CONOR LENIHAN, Minister of State at the Department of Enterprise, Trade and Innovation, in exercise of the powers conferred on me by sections
20(1), 30(1), 31(1) and 85 of the Industrial Designs Act 2001 (No. 39 of 2001) (as adapted by the Enterprise, Trade and Employment (Alteration of Name of Department and Title of Minister) Order 2010 (S.I. No. 185 of 2010)) and the Enterprise, Trade and Innovation (Delegation of Ministerial Functions) Order
2010 (S.I. No. 332 of 2010), hereby make the following regulations:
1. These Regulations may be cited as the Industrial Designs (Amendment) Regulations 2010 and come into operation on 4 October 2010.
2. The Industrial Designs Regulations 2002 (S.I. No. 280 of 2002) are amended—
(a) in Regulation 8(1) (as amended by Regulation 2 of the Industrial Designs (Amendment) Regulations 2007 (S.I. No. 620 of 2007)), by substituting “in a state which is a contracting party to the Agreement on the European Economic Area signed at Oporto on 2 May 1992, as amended for the time being,” for “in the European Union”, and
(b) in Schedule 2, by substituting—
(i) Form No. 1 in the Schedule to these Regulations for Form No. 1 (substituted by the Industrial Designs (Amendment) Regulations
2004 (S.I. No. 574 of 2004)), and
(ii) Form No. 1A in the Schedule to these Regulations for Form No.
1A (substituted by the Industrial Designs (Amendment) Regu­
lations 2004 (S.I. No. 574 of 2004)).

Notice of the making of this Statutory Instrument was published in

“Iris Oifigiúil” of 17th August, 2010.

[396] 3

SCHEDULE

FORM No. 1

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN SINGLE APPLICATION IN RESPCT OF ONE DESIGN

Reference No. of Applicant or

Authorised Agent......................

1. Applicant(s) (Full name and address of each person or company applying.)

Name(s)

Address(es)

Nationality(ies)

Telephone(s)

Email(s)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

2. Legal Representative (if any) (The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration.)

Name

Address

Phone

Email

4 [396]

3. Address for Service (within the EEA, to which correspondence is to be sent.)

If different to the address given at 1 or 2 above

Address

Phone

Email

Please tick box if you wish the Office to correspond with you by Email in relation to this application


4. Representations

A representation of the design complying with the conditions set out in Regulation 11 of the Industrial Designs Regulations 2002, is enclosed.


YES NO

5. Author(s)

(If there is more than one author (creator) of the design, insert here the name(s) and address(es) of the author(s).)

Name(s) of author(s)

Address(es)

[396] 5

6. Brief description of the design

7. Class(es) & Product(s)

Class(es)

(List here the class(es) including the subclass(es) of the Locarno system of International Classification in which registration of the design is requested.)

Product(s)

(List here the products to or in which the design is to be applied or incorporated.)

8. Priority

(If you have filed an application to register this Design outside the State within the last six months, please enter the relevant information here where a right to priority is claimed.)

State/Country/Territory/Area

Date

File Number (If available)

9. Deferment of Publication

(Is deferment of publication as provided for in Section 32(2) of the Principal Act requested? If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority.)


Yes No Period of deferment

6 [396]

10. Fee(s) accompanying the application.

Application fee to register a design

(€ )

Deferment fee for a period up to 12 months

(€ )

Deferment fee for a period from 12 to 24 months

(€ )

Deferment fee for a period from 24 to 30 months

(€ )

Total:

(€ )

11. Declaration and Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the legal representative named at 2.)

The Applicant(s) named herein claims to be the proprietor(s) of the design, a representation of which is attached, and requests the registration of the design on the basis of the foregoing information:

Signature

Name in BLOCK CAPITALS

If a company, state the position in the company of the person signing

Date

[396] 7

FORM No. 1A

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN MULTIPLE APPLICATION


This is a Multiple Application Reference No. of Applicant or covering (insert number) [ ] Authorised Agent.................... designs

1. Applicant(s) (Full name and address of each person or company applying.)

Name(s)

Address(es)

Nationality(ies)

Telephone(s)

Email(s)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

2. Legal Representative (if any) (The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration.)

Name

Address

Phone

Email

3. Address for Service (within the EEA, to which correspondence is to be sent.)

If different to the address given at 1 or 2 above

Address

Phone

Email


8 [396]

Please tick box if you wish the Office to correspond with you by Email in relation to this application

4. Representations



Separate representations of each of the designs, YES NO

complying with the conditions set out in Regulation 11

of the Industrial Designs Regulations 2002, are

enclosed.

[IMPORTANT PLEASE NOTE: THE REPRESENTATIONS ENCLOSED WITH THIS APPLICATION MUST BE NUMBERED CON­ SECUTIVELY USING ARABIC NUMERALS INSERTED ON THE BACK OR REVERSE SIDE OF THE REPRESENTATIONS. THESE NUMERALS ARE REQUIRED TO IDENTIFY AND DISTINGUISH THE DESIGNS IN RESPECT OF WHICH REGISTRATION IS REQUESTED. WHERE MORE THAN ONE REPRESENTATION OF A PARTICULAR DESIGN IS SUBMITTED, EACH OF THE REPRESENTATIONS OF THAT DESIGN SHOULD BE ASSIGNED THE SAME IDENTIFICATION NUMERAL.]

5. Author(s)
(If there is more than one author (creator) indicate the design identification numeral of each design (see 4 above) opposite the name and address of each author.)

Design Identification

Numeral(s)

Name of author(s)

Address(es)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

[396] 9

6. Brief description of designs

(Insert here a brief description of the designs. If you need to provide separate descriptions of each of the designs included in the application, indicate the design identification numeral of each design opposite each of the descriptions provided.)

Design Identification No.

Insert here a brief description of each design.

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

7. Class(es) & Product(s)

Design Identification No.

Class(es)

(List here the class(es) including the subclass(es) of the Locarno system of International Classification in which registration of the design(s) is/are requested.)

Product(s)

(List here the products to or in which the design is to be applied or incorporated.)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

[Note: Except in cases of ornamentation, all of the designs in a mul­ tiple application for registration must be in respect of products that belong to the same class of the Locarno system of International Clas­ sification.]

10 [396]

8. Priority

(If you have filed an application to register the same Designs outside the State within the last six months, please enter the relevant information here where a right to priority is claimed. If there are different claims to priority in respect of the different designs included in the application, indicate the design identifi­ cation numeral of each design opposite each of the claims listed.)

Design

Identification No.

State/Country/Territory/Area

Date

File Number (If available)

Should additional space be required, please use an additional sheet, insert the appropriate section heading and attach to the completed form when filing.

9. Deferment of Publication

(Is deferment of publication as provided for in Section 32(2) of the Principal Act requested? If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority.)

Yes No

Design Identification No.

Period of Deferment

[396] 11

10. Fee(s) accompanying the application.

Application fee to register a design

(€ )

Additional fee (per design) in a multiple application

(€ )

Deferment fee for a period up to 12 months

(€ )

Deferment fee for a period from 12 to 24 months

(€ )

Deferment fee for a period from 24 to 30 months

(€ )

Total:

(€ )

11. Declaration and Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the legal representative named at 2.)

The Applicant(s) named herein claims to be the proprietor(s) of the designs, representations of which are attached, and requests the registration of the designs on the basis of the foregoing information:

Signature

Name in BLOCK CAPITALS

If a company, state the position in the company of the person signing

Date

GIVEN under my hand,
11 August 2010
CONOR LENIHAN,
Minister of State at the Department of Enterprise, Trade and Innovation.
12 [396]
EXPLANATORY NOTE.

(This note is not part of the Instrument and does not purport to be a legal interpretation.)

The Regulations make a slight change to the Industrial Design Regulations
2002 by clarifying that a person, involved in any proceeding before the Control­ ler of Patents, Designs and Trade Marks or a registered proprietor of a design, may have an address for service in the European Economic Area (EEA). The Regulations also amend Forms 1 and 1A in Schedule 2 to those Regulations by improving the layout of Forms 1 and 1A and also amending the address for service requirement to allow applicants to provide an address for service within the EEA.

BAILE ÁTHA CLIATH

ARNA FHOILSIÚ AG OIFIG AN tSOLÁTHAIR Le ceannach díreach ón

OIFIG DHÍOLTA FOILSEACHÁN RIALTAIS,

TEACH SUN ALLIANCE, SRÁID THEACH LAIGHEAN, BAILE ÁTHA CLIATH 2, nó tríd an bpost ó

FOILSEACHÁIN RIALTAIS, AN RANNÓG POST-TRÁCHTA,

AONAD 20 PÁIRC MIONDÍOLA COIS LOCHA, CLÁR CHLAINNE MHUIRIS, CONTAE MHAIGH EO,

(Teil: 01 - 6476834 nó 1890 213434; Fax: 094 - 9378964 nó 01 - 6476843)

nó trí aon díoltóir leabhar.

—————— DUBLIN

PUBLISHED BY THE STATIONERY OFFICE To be purchased directly from the

GOVERNMENT PUBLICATIONS SALE OFFICE

SUN ALLIANCE HOUSE, MOLESWORTH STREET, DUBLIN 2, or by mail order from

GOVERNMENT PUBLICATIONS, POSTAL TRADE SECTION, UNIT 20 LAKESIDE RETAIL PARK, CLAREMORRIS, CO. MAYO, (Tel: 01 - 6476834 or 1890 213434; Fax: 094 - 9378964 or 01 - 6476843)

or through any bookseller.

——————

€3.81

Wt. (B27536). 290. 8/10. Cahill. Gr. 30-15.


التشريعات يُنفّذ (1 نصوص) يُنفّذ (1 نصوص)
المعاهدات يخصّ (عدد السجلات 1) يخصّ (عدد السجلات 1) مرجع وثيقة منظمة التجارة العالمية
IP/N/1/IRL/93
IP/N/1/IRL/D/10
لا توجد بيانات متاحة.

ويبو لِكس رقم IE203