عن الملكية الفكرية التدريب في مجال الملكية الفكرية إذكاء الاحترام للملكية الفكرية التوعية بالملكية الفكرية الملكية الفكرية لفائدة… الملكية الفكرية و… الملكية الفكرية في… معلومات البراءات والتكنولوجيا معلومات العلامات التجارية معلومات التصاميم الصناعية معلومات المؤشرات الجغرافية معلومات الأصناف النباتية (الأوبوف) القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية مراجع الملكية الفكرية تقارير الملكية الفكرية حماية البراءات حماية العلامات التجارية حماية التصاميم الصناعية حماية المؤشرات الجغرافية حماية الأصناف النباتية (الأوبوف) تسوية المنازعات المتعلقة بالملكية الفكرية حلول الأعمال التجارية لمكاتب الملكية الفكرية دفع ثمن خدمات الملكية الفكرية هيئات صنع القرار والتفاوض التعاون التنموي دعم الابتكار الشراكات بين القطاعين العام والخاص أدوات وخدمات الذكاء الاصطناعي المنظمة العمل مع الويبو المساءلة البراءات العلامات التجارية التصاميم الصناعية المؤشرات الجغرافية حق المؤلف الأسرار التجارية أكاديمية الويبو الندوات وحلقات العمل إنفاذ الملكية الفكرية WIPO ALERT إذكاء الوعي اليوم العالمي للملكية الفكرية مجلة الويبو دراسات حالة وقصص ناجحة في مجال الملكية الفكرية أخبار الملكية الفكرية جوائز الويبو الأعمال الجامعات الشعوب الأصلية الأجهزة القضائية الموارد الوراثية والمعارف التقليدية وأشكال التعبير الثقافي التقليدي الاقتصاد التمويل الأصول غير الملموسة المساواة بين الجنسين الصحة العالمية تغير المناخ سياسة المنافسة أهداف التنمية المستدامة التكنولوجيات الحدودية التطبيقات المحمولة الرياضة السياحة ركن البراءات تحليلات البراءات التصنيف الدولي للبراءات أَردي – البحث لأغراض الابتكار أَردي – البحث لأغراض الابتكار قاعدة البيانات العالمية للعلامات مرصد مدريد قاعدة بيانات المادة 6(ثالثاً) تصنيف نيس تصنيف فيينا قاعدة البيانات العالمية للتصاميم نشرة التصاميم الدولية قاعدة بيانات Hague Express تصنيف لوكارنو قاعدة بيانات Lisbon Express قاعدة البيانات العالمية للعلامات الخاصة بالمؤشرات الجغرافية قاعدة بيانات الأصناف النباتية (PLUTO) قاعدة بيانات الأجناس والأنواع (GENIE) المعاهدات التي تديرها الويبو ويبو لكس - القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية معايير الويبو إحصاءات الملكية الفكرية ويبو بورل (المصطلحات) منشورات الويبو البيانات القطرية الخاصة بالملكية الفكرية مركز الويبو للمعارف الاتجاهات التكنولوجية للويبو مؤشر الابتكار العالمي التقرير العالمي للملكية الفكرية معاهدة التعاون بشأن البراءات – نظام البراءات الدولي ePCT بودابست – نظام الإيداع الدولي للكائنات الدقيقة مدريد – النظام الدولي للعلامات التجارية eMadrid الحماية بموجب المادة 6(ثالثاً) (الشعارات الشرفية، الأعلام، شعارات الدول) لاهاي – النظام الدولي للتصاميم eHague لشبونة – النظام الدولي لتسميات المنشأ والمؤشرات الجغرافية eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange الوساطة التحكيم قرارات الخبراء المنازعات المتعلقة بأسماء الحقول نظام النفاذ المركزي إلى نتائج البحث والفحص (CASE) خدمة النفاذ الرقمي (DAS) WIPO Pay الحساب الجاري لدى الويبو جمعيات الويبو اللجان الدائمة الجدول الزمني للاجتماعات WIPO Webcast وثائق الويبو الرسمية أجندة التنمية المساعدة التقنية مؤسسات التدريب في مجال الملكية الفكرية الدعم المتعلق بكوفيد-19 الاستراتيجيات الوطنية للملكية الفكرية المساعدة في مجالي السياسة والتشريع محور التعاون مراكز دعم التكنولوجيا والابتكار نقل التكنولوجيا برنامج مساعدة المخترعين WIPO GREEN WIPO's PAT-INFORMED اتحاد الكتب الميسّرة اتحاد الويبو للمبدعين WIPO Translate أداة تحويل الكلام إلى نص مساعد التصنيف الدول الأعضاء المراقبون المدير العام الأنشطة بحسب كل وحدة المكاتب الخارجية المناصب الشاغرة المشتريات النتائج والميزانية التقارير المالية الرقابة
Arabic English Spanish French Russian Chinese
القوانين المعاهدات الأحكام التصفح بحسب الاختصاص القضائي

اللائحة التنفيذية لنظام براءات الاختراع والتصميمات التخطيطية للدارات المتكاملة والأصناف النباتية والنماذج الصناعية (المعدلة بقرار مجلس إدارة الهيئة السعودية للملكية الفكرية رقم (5/8/2019) وتاريخ 04/09/1440هـ الموافق 9 مايو 2019م)، المملكة العربية السعودية

عودة للخلف
أحدث إصدار في ويبو لِكس
التفاصيل التفاصيل سنة الإصدار 2019 تواريخ نص معدّل حتى : 16 ديسمبر 2018 نص صادر : 13 أكتوبر 2015 نوع النص اللوائح التنفيذية الموضوع البراءات، التصاميم الصناعية، تصاميم الدوائر المتكاملة، حماية الأصناف النباتية الموضوع (فرعي) إنفاذ قوانين الملكية الفكرية والقوانين ذات الصلة، هيئة تنظيمية للملكية الفكرية

المواد المتاحة

النصوص الرئيسية النصوص ذات الصلة
النصوص الرئيسية النصوص الرئيسية بالعربية اللائحة التنفيذية لنظام براءات الاختراع والتصميمات التخطيطية للدارات المتكاملة والأصناف النباتية والنماذج الصناعية (المعدلة بقرار مجلس إدارة الهيئة السعودية للملكية الفكرية رقم (5/8/2019) وتاريخ 04/09/1440هـ الموافق 9 مايو 2019م)      بالإنكليزية Implementing Regulations of the Law of Patents, Layout-Designs of Integrated Circuits, Plant Varieties, and Industrial Designs (as amended up to Decision of the Board of Directors of Saudi Authority for the Intellectual Property No. 5/8/2019 of 4 Ramadan 1440H (May 9, 2019))        
 Implementing Regulations of the Law of Patents, Layout-Designs of Integrated Circuits, Plant Varieties, and Industrial Designs (as amended up to Decision of the Board of Directors of Saudi Authority for the Intellectual Property No. 5/8/2019 of 04/09/1440 (May 9, 2019))

The Implementing Regulations of the Law of

Patents, Layout Designs of Integrated Circuits,

Plant Varieties and Industrial Designs

Issued by President of King Abdulaziz City for Science

and Technology No. (161-2-3607329) dated

30/12/1436H, and amended by the Board of

Directors of the Saudi Authority for Intellectual

Property No. (5/8/2019) dated on 04/09/1440 AH.

R-LA-079-01

Definitions

Chapter 1

General Provisions

Article 1:

The following terms and phrases, wherever mentioned in these Regulations

shall have the meanings assigned thereto, unless the context requires

otherwise:

Authority: The Saudi Authority for Intellectual Property.

Law: The Law of Patents, Layout Designs of Integrated Circuits, Plant

Varieties, and Industrial Designs.

Regulations: The Implementing Regulations of the Law of Patents, Layout

Designs of Integrated Circuits, Plant Varieties and Industrial Designs.

Subject-Matter of Protection: Either an invention, a layout design of an

integrated circuit, a plant variety or an industrial design.

Protection Document: A patent, a certificate of a layout design, a plant patent,

or a certificate of an industrial design.

Committee: The Committee provided for in Article 35 of the Law.

Paris Union: The Union constituted pursuant to Article One of the Paris

Convention for the Protection of Industrial Property, which consists of

member states of the Convention.

PCT: The Patent Cooperation Treaty concluded in Washington D.C. on

19/06/1970, of which the Royal Decree No. M / 63 dated 28/12/1430 H was

issued approving the accession of the Kingdom of Saudi Arabia and the

subsequent amendments thereto.

The Authority

Communication with the Authority

1.

acceptable means.

International Application: A patent application filed (deposited) under the

the provisions of Chapter 11 of theseprovisions of PCT and subject to

Regulations.

National Phase: The conversion of an international application into a national

application upon designation of the Kingdom of Saudi Arabia for protection,

and its receipt of said application in accordance with PCT provisions.

Article (2):

The Authority shall implement the provisions of the Law and the Regulations.

It shall, in particular, perform the following:

1. Receive and process protection applications and prepare protection

documents.

2. Propose issuance of and amendments to forms necessary to discharge

its duties.

3. Issue decisions granting protection documents and publish

information related thereto.

4. Use information technology and access national and international

databases when processing protection applications and documents.

5. Propose necessary amendments to the provisions of the Law and the

Regulations.

6. Propose regulations for licensing agents and lawyers to represent

clients before the Authority.

Article (3):

Correspondences with the Authority shall be addressed to Authority at

the postal address determined by the Authority or through any other

Authority Records and Files

2.

3.

for a fee.

Correspondences with the Authority shall be in writing in a manner

acceptable to the Authority. The applicant or his agent is not required to

2.

appear in person.

3. Correspondences with the Authority regarding protection applications

or documents shall include the reference number of the application or

document. The Authority is not obligated to process correspondences

failing to comply with this condition.

4. Applications for granting protection documents and any relevant

documents or correspondences shall be sent to the Authority

electronically or through any other means acceptable thereto.

5. Notices and correspondences relating to protection applications and

documents shall be delivered by the Authority electronically or by hand

or registered mail, and all correspondences from the Authority shall be

sent to the applicant or his agent at the address recorded with the

Authority. Notices delivered in the above manner shall have legal effect.

6. The day on which the notice is sent shall not be counted as part of the

statutory period given. Any period expiring on weekends or official

holidays of the Kingdom shall be extended to the first following

working day.

Article (4):

1. The Authority shall maintain records for protection applications and

documents, where the main data of the protection applications and

documents and any amendments thereto are recorded.

Published protection applications shall be made available to the public.

Copies of the applications referred to in paragraph 2 may be obtained

Payment of Fees

Gazette, Statements and Other Publications

Unpublished protection applications shall remain confidential.

or copies

(C)

4.

4.

5. The Authority shall keep the originals of the applications

thereof for a period of five years from the date of withdrawal, forfeiture

or rejection of the application, or forfeiture of the right to the protection

document or expiration of its term.

Article (5):

1. Fees prescribed by the Law and its Implementing Regulations shall be

paid through SADAD Payment System or any other payment method

determined by the Authority.

2. The Authority shall, upon request and upon verification, refund any

sums paid by mistake or paid in excess of the fees.

Article (6):

1. The Authority shall periodically publish in Arabic a Gazette containing

all information required to be published by the Law. If necessary, it

may contain an English translation of some information.

2. The Gazette shall be issued with serial numbers, carrying both Hijri

and Gregorian calendar dates, and the Authority shall make it available

on the Internet and shall maintain a number of copies thereof.

3. The Authority may publish the following in paper or on the Internet:

(A) Applications of patents and plant patents including the

specifications as filed, as well as search and examination reports.

(B) Protection documents including the specification.

Texts of final decisions issued by the Committee.

The Authority may exchange its publications and statements with

patent offices and with others.

Content of the GazetteArticle (7):

The Gazette shall contain at least the following:

1. First page of the application for patents and plant patents.

2. First page of granted protection documents.

3. A list of protection applications and documents which have been

amended or whose ownership has been changed or transferred.

4. A list of forfeited, rejected or withdrawn protection applications and

documents.

5. A list of the denominations of plant varieties included in the

applications for plant patents and the new denominations of plant

varieties.

6. A list of abandoned protection documents.

7. Decisions of compulsory licenses, amendments, withdrawals, transfer

and abandonment thereof.

General Provisions

Chapter 2

Terms and Conditions for Filing an Application

Article (8):

1- Protection applications shall be submitted in the designated electronic

forms or in any other method approved by the Authority. The application shall

be clearly prepared in Arabic or a certified English copy of the previous

application and a translation thereof shall be submitted within three months

The forms shall contain all information required and answers to all queries.

2- A- The patent application filing date shall be the same date of receipt

of the application, satisfying at least the following:

1- Filling appropriate forms for a patent application.

2- Applicant’s name, capacity and address.

3- A description of the invention.

4- Payment of filing fees.

B-The applicant must satisfy the requirements stipulated in this Article and

Articles 9 to 17 of the Regulations within two months from the filing date

(receipt) provided the description of the invention does not include additional

information other than that provided at the time of filing.

C- In case of satisfying the requirements included in Paragraph B but the

description of the invention includes more information other than that

provided at the time of filing, the date of satisfying the requirements shall be

deemed as the filing date.

D- If the applicant fails to satisfy the requirements specified in Paragraph B

within the prescribed period, the application shall be deemed null and void.

Conditions for Filing an Application

Conditions for Filling out a Patent Application Form

The filing date of application for a certificate of a layout design of an

integrated circuit, application for plant patent and application for industrial

3-

design shall be the date of receiving the protection application satisfying all

requirements provided for in this Article and Articles 18 to 29 based on each

protection subject, upon payment of filing fees.

4- If the applicant resides outside the Kingdom, he must designate an

authorized agent in the Kingdom.

Section One

Terms and Conditions for Filing Patent Applications

Article (9):

1. Filling the patent application form.

2. Providing the specification of the invention and any relevant

attachments.

3. The title of the invention shall comply with the provided conditions and

shall not differ from the title given in the specification of the invention.

4. The documents submitted shall be originals or copies certified by the

competent authorities.

5. Payment of filing fees.

6. The applicant shall satisfy all the Authority’s requirements relating to

the application.

Article (10):

The form shall be clearly filled and shall include the title of the invention, the

applicant’s name, address, place of residence and place of work; the inventor’s

name and address; name of the agent, if any, and his address; and information

regarding priority and disclosure. Fields of the form shall be filled based on

its numbers as follows:

1- Title of the Invention: The title of the invention shall be brief and specific,

preferably of not more than seven words. General phrases such as “A Chemical

Process”, “An Electronic Device”, “An Electric Device” and “An Organic

Compound of New Characteristics” shall not be considered as titles of an

invention. In order to shorten the title, phrases such as “A New Method of …

“, “Improvements in …”, “Development in …” may not be used.

2-Name of the Applicant: For individuals, the name shall be identical to that

stated in the identification document in the following order: First name-

Father’s name-Grandfather’s name-Family name. For establishments and

companies, the name shall be identical to its official name. In case of multiple

applicants, the data of the first applicant shall be provided in this part and data

of the remaining applicants shall be provided in the relevant fields.

Correspondences between the Authority and the applicants shall be made

through the first applicant in the absence of an agent. If the applicant is not the

inventor, a document showing assignment of the right to him shall be attached.

3-Name of the Inventor: The name of the inventor shall be identical to that

stated in the identification document and in the following order: first name,

father’s name, grandfather’s name and family name. In case of multiple

inventors who actually contributed to the invention, the data of the first

inventor shall be provided in this part and the data relating to the other

inventors shall be provided in the relevant fields.

4-Priority and Disclosure Information: If the invention was previously

disclosed, the documents showing the date of disclosure and reasons therefor

shall be attached. If the applicant is a citizen or resident of one of the countries

of the Paris Union or owns a real and active industrial or commercial firm

therein and wishes to claim priority of an application previously filed in one of

General Conditions for the Specification:

said countries, information relating to the priority claim (country, application

number and filing date), patent number and date, if any, shall be stated. A

name.

certified copy of the previous application and a translation thereof shall be

submitted within three months from the filing date. This shall be without

prejudice to other relevant international treaties to which the Kingdom is party.

5-Attachments: The attachments (specification and any other attachments)

shall be listed, and page numbers shall be provided in numbers and letters. In

case of a priority claim, any attachment in this respect shall be referenced.

6-Name of the Agent: The name of the agent shall be stated. Said agent must

hold a power of attorney acceptable to the Authority issued by a competent

authority if the applicant is in the Kingdom. If the applicant is outside the

Kingdom, it is necessary to have a power of attorney approved by the

competent authorities and certified by the Kingdom's diplomatic missions

abroad. The agent shall attach proof that he is licensed to practice in the

Kingdom.

7-Declaration: In this part, the applicant or agent shall warrant that all

information provided above is true and shall be responsible for all the

consequences of providing incorrect information.

Article (11):

The specification shall include the following contents and in the following

order:

1-“Abstract”, “Full Description”, “Claims” and “Drawings”.

2-The beginning of the abstract and the full description shall be the inventor’s

3-The Abstract, full description and claims may include names, symbols,

formulae, mathematical and chemical equations, scientific terms and others in

Instructions Relating to Translation of Applications into Arabic

Latin letters. None of them shall contain drawings. As for tables, if any, they

shall be included in the full description of the specification.

4- Measurements shall be in the metric system and temperature degrees in

centigrade. Corresponding units may be added between parentheses.

5-Drawings and figures shall be attached if they are necessary for complete and

clear understanding of the invention.

6-The specification may not include statements or drawings contradictory to

Islamic Sharia or public morals.

7-The specification may not include advertisements for products,

manufacturing methods, statements degrading other products or

manufacturing methods, nor words or sentences not appropriate or necessary

for understanding the invention. Comparison with a previous industrial

technology may not be deemed degradation of such technology.

Article (12):

1-The scientific term, when used for the first time, shall be given in its original

language with the Arabic equivalent. Subsequently, only the Arabic name is

given, except for claims where the term is repeated in both languages.

2-In case of the use of abbreviated names in a foreign language, the full name

in both Arabic and English shall be mentioned when used for the first time in

the text. Subsequently, the abbreviation only shall be given.

3-The same Arabic term for a Latin word shall be used when the Latin term

recurs in the text.

4-Symbols, units, names and fundamental physical constants approved by the

International Union of Pure and Applied Physics (IUPAP) – the SUNAMCO

Committee published in Union Document No. 25 shall be adopted.

Conditions for the Abstract

5-Latin letters shall be used in accordance with the IUPAC1 System for writing

and symbols of chemical elements,structural figures, chemical formulae,

compounds, and names. If the chemical name appears in the title it shall be

written in both Arabic and Latin.

6-References, research papers, articles and scientific books shall be written in

their original language.

Article (13):

1-The abstract shall not exceed half a page, or one page in exceptional cases.

2-If there are drawings, a reference shall be made in the abstract to the figure

that depicts the invention, and the figure’s number shall be given at the end of

the abstract.

3-If there is reference in the abstract to components in the figure referred to in

the previous paragraph, and if numbers or letters are used therein to identify

these components, such numbers or letters shall be given in parentheses within

the text in the abstract.

4-The abstract shall include the technical field along with a brief description of

the main components of the invention and its primary use.

5-The abstract shall be written in simple language and provide a clear idea of

the technical problem it addresses, for easy reference in media and research.

Such abstract may not be used for defining the scope of protection.

6-The anticipated significance, value or merits of the invention may not be

stated.

PAC = INTERNATIONAL UNION OF PURE AND APPLIED CHEMISTRY 1

Conditions for Full Des

tions for Claims

a part does not require a new page.

Article (15): Condi

7-An English version of the abstract, if available, shall be attached.

Article (14): cription

The full description shall include the following parts:

1-Background of the Invention: This shall include the technical field of the

invention, a description of the prior art, including any documents of which the

inventor is aware, and any problems relating to the prior art the invention seeks

to overcome.

2-General Description of the Invention: This shall indicate the merits of the

invention compared to the prior art, difficulties or problems sought to be

overcome, and the purpose of the invention. The description shall be rendered

in a clear language understood by a reader with an average knowledge in the

technical field. This part usually relates to the primary claim.

3-Brief Explanation of the Drawings: This shall include a brief explanation of

the figures and their sections, if any.

4-Detailed Description: The description of the invention shall be clear and

sufficient for an average person in the art to execute, and a detailed explanation

of the invention and the method of its industrial application shall be given. The

applicant shall indicate the best method the inventor is aware of for execution

of the invention at the filing or priority date. The explanation shall also include

a detailed reference to the drawings attached. If the application contains a gene

sequence, it shall be separately attached in an electronic format.

The above parts shall be sequentially ordered, under the following headings:

“Background of the Invention”, “General Description of the Invention”, “Brief

Explanation of the Drawings”, and “Detailed Description”. The heading shall

be given at the beginning of the line and shall be underlined. The beginning of

Conditions for Drawings

to make one drawing.

1-The application shall contain at least one independent claim. It may contain

other dependent and independent claims, and they shall be numbered

consecutively, provided that claim number one is the one defining the widest

scope required.

2- The claims shall give a full definition of the required scope of protection

including the main components of the invention. They shall also be of a specific

scope, compared to what is disclosed in the full description.

3- The claims shall be clear and interconnected and shall define the essence of

the invention (not its merits) in a specific manner which makes it possible to

verify the scope of protection without recourse to the full description or the

drawings, except when absolutely necessary.

4- The claims shall be formulated, whenever possible, in such a way as to

identify the new part or the inventive step in the scope of protection. For

example, the invention to be protected shall be defined by specifying its

components and technical features, followed by the phrase, “characterized by

…” or “the improvement comprises ….” or any other similar phrase, then the

novel or innovative aspect that distinguishes it from any other invention.

5- If the application contains drawings and there is reference in the claim to

components in one of the figures that include numbers or letters used to

identify these components, these numbers or letters may be mentioned in

parentheses within the text in the claim.

Article (16):

1-Drawings shall be clear and of high quality for duplication.

2-The page may contain more than one figure and, when necessary, a figure

may be put on more than one page provided that they can be easily juxtaposed

Other Attachments to the Application

Conditions for Filing an Application

3-Figures shall be given separate numbers irrespective of the number of the

page and,. The same numbers or letters shall be used in other drawings to

4-Attaching a

identify the same components. Drawings may not be shaded and shall be

presented in bold black lines, and the section shall be highlighted with broken

lines.

4- Drawings may not contain any words or otherwise for the purpose of

description. When necessary, words may be used to explain some of the main

features.

Article (17):

The applicant shall provide the Authority with a copy of examination and

search reports as well as copies of applications previously filed or patents

granted by other offices for the same invention.

Section Two

Terms and Conditions for Filing an Application for a Certificate of a

Layout Design of an Integrated Circuit

Article (18):

1-Filling the application for a certificate of a layout design of integrated circuit.

2-Attaching a brief and precise description of the design, including information

that defines the electronic function of the integrated circuit.

3-Attaching a clear drawing or image of the design. Parts of the drawing or

image related to the method of manufacturing the integrated circuit may be

excluded, provided that the remaining parts are sufficient to explain and

identify the design.

sample of the integrated circuit if it is for commercial

exploitation, if requested by the Authority.

Conditions for Filling out an Application Form for Certificate

of Layout Design

be originals or copies certified by the5-The documents submitted shall

competent authorities.

6-Payment of filing fees.

7-The applicant shall satisfy all the Authority’s requirements relating to the

application.

Article (19):

The Application form for certificate of layout design shall be clearly filled out,

including the following:

1-Title of the design: It shall be concise and specific.

2-Date and place of first commercial exploitation: This information shall be

provided if the design has been exploited commercially anywhere in the world.

3-Name of the applicant: For individuals, the name shall be identical to that

stated in the identification document. As for establishments and companies, it

shall be identical to the official name. In case of multiple applicants, the data of

the first applicant shall be provided in this part, and data relating to the

remaining applicants shall be provided in the relevant fields. Correspondences

between the Authority and the applicants shall be made through the first

applicant in the absence of an agent.

4-Name of the design creator: The name shall be identical to that stated in the

identification document. In case of multiple creators, the data of the first creator

shall be provided in this part and the data relating to the other creators shall be

provided in the relevant fields.

5-Name of the agent: The name of the agent shall be stated. Said agent must

hold a power of attorney acceptable to the Authority issued by a competent

authority if the applicant is in the Kingdom. If the applicant is outside the

Conditions for Filing an Application

a power of attorney approved by the

competent authorities and certified by the Kingdom's diplomatic missions

Kingdom, it is necessary to have

abroad. The agent shall attach proof that he is licensed to practice in the

Kingdom.

6-Attachments: Titles of attachments to the form (figures or any other

attachments) shall be listed, and page numbers shall be provided in numbers

and letters. In the case of previous commercial exploitation, any attachments in

this respect shall be referenced.

7-Declaration: In this part, the applicant or agent shall warrant that all

information provided above is true and shall be responsible for all the

consequences of providing incorrect information.

Section Three

Terms and Conditions for Filing an Application for a Plant Patent

Article (20):

1-Filling the application for a plant patent.

2-The technical description form shall be filled, and any relevant attachments

shall be enclosed.

3-Attaching the abstract.

4-Payment of filing fees.

5-Photographs or drawings of the plant variety with a brief description thereof

shall be attached if they are necessary to identify the variety.

6-The application for protection shall be limited to one variety.

7-The background of the technical description form shall be white.

Conditions for Filling out an Application Form for Plant Patent

8-The denomination of the plant variety provided in the technical description

of the variety shall be identical to the denomination provided in the form and

other official documents.

9-The documents submitted shall be originals or copies certified by the

competent authorities.

10-The applicant shall satisfy all the Authority’s requirements relating to the

application.

Article (21):

The application for a plant patent shall be clearly filled out. It is preferable to

add the name of the applicant, the name of the plant breeder and the data

relating to priority and disclosure in English, including the following:

1-Denomination or Proposed Denomination of the Plant Variety: The

denomination of the variety shall be provided. If there is no denomination, a

proposed denomination of the variety or a temporary one that refers to the

plant breeder shall be provided. The denomination of the plant variety may

consist of one word or a group of words and numbers or a group of letters and

numbers with or without meaning, provided that the constituents of the

denomination make it possible to identify the variety.

2-Genus and Species: The scientific name of the variety shall be provided by

stating its genus and species in Latin, in italics or underlined, according to the

conventions of writing scientific names.

3-Common or Commercial Name: If there is a common or commercial name

for the variety it shall be provided in Arabic and in English or Latin.

4-Name of the Applicant: For individuals, the name shall be identical to that

stated in the identification document. As for establishments and companies, it

shall be identical to the official name. In case of multiple applicants, the data of

the first applicant shall be provided in this part, and data relating to the

in the field designated for such

the case of a

the

remaining applicants shall be provided

purpose. Correspondences between the Authority and the applicants shall be

made through the first applicant in the absence of an agent.

5-Name of the Plant Breeder: The name of the plant breeder shall be identical

to that stated in the identification document. In case of multiple breeders who

actually participated in the breeding of the plant, the data of the first breeder

shall be provided in this part and the data of the other breeders shall be

provided in the relevant fields.

6-Name of the Agent: The name of the agent shall be stated. Said agent must

hold a power of attorney acceptable to the Authority issued by a competent

authority if the applicant is in the Kingdom. If the applicant is outside the

Kingdom, it is necessary to have a power of attorney approved by the

competent authorities and certified by the Kingdom's diplomatic missions

abroad. The agent shall attach proof that he is licensed to practice in the

Kingdom.

7-Attachments: The attachments to the Form (technical description of the

variety and any other attachments) shall be listed, and the number of pages

shall be provided in numbers and letters. In case of a priority claim, any

attachments in this respect shall be referenced.

8-Priority and Disclosure Information: If the plant variety was previously

disclosed or sold or the propagating materials were previously sold, the

documents showing the date and reasons for disclosure shall be attached. In

priority claim, the following shall be provided: priority

information (name of the country, date and number of the application), date of

publication and number of the plant patent (number of granting the patent to

plant breeder) and its date, if any. A certified copy of the previous

Conditions for the Technical Description of the Variety

change and the

application and a translation thereof shall be submitted within three months.

In all cases, relevant international agreements to which the Kingdom is party

shall apply

9-Data regarding previous filings (country name, filing date, application

number and publication date) and, if available, the plant patent number (plant

breeder’s right number) and date shall also be submitted.

10-Declaration: In this part, the applicant or agent shall warrant that all

information provided above is true and shall be responsible for all the

consequences of providing incorrect information.

Article (22):

The technical description of the variety shall include the following:

1-Denomination of the variety.

2-Genus and Species: The scientific name of the variety shall be provided by

stating its genus and species in Latin, in italics or underlined, according to the

conventions of writing scientific names.

3-Full disclosure of the origin of the variety and method of breeding and

whether it is carried out through genetic engineering.

4-A detailed description of the consecutive stages of the selection and

propagation processes which were used to breed the variety.

5-Proof of the uniformity of the variety showing the degree of variation in any

of its characteristics.

6-A statement of the stability of the variety showing the number of cycles of

propagation during which none of the distinguishing features underwent any

changes noted during propagation processes, and their

repetition, together with a repetition of the noted or expected confusion.

Conditions for the Abstract

tions for Photographs and Drawings

7-A statement that the variety is distinct showing clearly how it is distinguished

from other varieties descending from the same species. If there is any similarity

5.

Article (24): Condi

between the variety and other varieties, the applicant shall specify these

varieties with a detailed description of the differences among them. Samples of

propagation materials or other plant samples of the variety or photographs of

the same shall be provided if this helps show the distinctiveness of the variety

very clearly.

8-Drawings of the variety shall be provided if this helps identify the variety

with a brief description thereof, if available.

9-A photograph of the plant or its main parts, especially ornamentals or

unknown plants.

10- Measurements shall be in the metric system and temperature degrees in

centigrade. Corresponding units may be added between parentheses.

Article (23):

1-The abstract shall include the name of the variety, names of the parents, and

breeding method in brief.

2-The abstract shall be written in a simple language to provide clear

understanding of the variety and how it is distinct from the closest similar

varieties.

3-A reference in the abstract shall be made to the general figure of the plant

variety.

4-The name of the plant variety in the abstract shall be identical to the name

provided in the application forms (Arabic/English).

The abstract shall not exceed half a page, or one page in exceptional cases.

1-Photographs and drawings shall be clear, unshaded with no background,

high quality, and can be clearly reproduced.

2-Numbers of photographs and drawings shall be in sequentially ordered.

3- numbers and letters shall be used to distinguish the components of

drawings.

4-The main figure shall be on a separate page.

Other Attachments to t

Conditions for Filing an Application

competent authorities.

he Application

1-The applicant may provide the Authority with copies of examination and

Article (25):

search reports, and applications or plant patents (plant breeder’s rights) related

to the same plant variety granted by foreign entities.

2-The applicant shall provide the Authority with reproduction materials,

copies of examination or search reports, applications or plant patents (plant

breeder’s rights) related to the same plant variety, upon request, within three

months from the date of notification. In case of failure to satisfy such

requirements, the application shall be rejected, unless the applicant provides

justification acceptable to the Authority for non-compliance within the

specified period.

Article (26):

The Authority shall provide protection for fifteen genera in the first year of the

application of the Law and shall issue a list thereof. New genera shall be listed

yearly based on need and capability.

Section Four

Terms and Conditions for Filing Application for a Certificate of Industrial

Design

Article (27):

1-An application for a certificate of industrial design shall be clearly filled,

including the data of the design and any other relevant attachments.

2-Pictures and drawings of the industrial design sought to be protected shall

be attached provided they do not exceed seven.

3-A protection application shall be limited to one industrial design.

4-The documents submitted shall be originals or copies certified by the

Conditions for Filling out an Application Form for a Certificate

of Industrial Design

6-The applicant shall satisfy all the Authority’s requirements relating to the

5-Payment of filing fees.

application.

Article (28):

The application for a certificate of industrial design shall be clearly filled out

as follows:

1- Name of the Applicant: The name shall be identical to that stated in the

identification document. As for establishments and companies, it shall be

identical to the official name. If there is more than one applicant, the data of

the first applicant shall be provided in this part, and data relating to the

remaining applicants shall be provided in the fields designated for such

purpose. Correspondences between the Authority and the applicants shall be

made through the first applicant in the absence of an agent.

2- Name of the Designer: The name of the designer shall be identical to the

name in the identification document. If there are multiple designers, the data

of the first designer shall be provided in this part and data of the other

designers shall be provided in the relevant fields.

3- Name of the Agent: The name of the agent shall be stated. Said agent must

hold a power of attorney acceptable to the Authority issued by a competent

authority if the applicant is in the Kingdom. If the applicant is outside the

Kingdom, it is necessary to have a power of attorney approved by the

competent authorities and certified by the Kingdom's diplomatic missions

abroad. The agent shall attach proof that he is licensed to practice in the

Kingdom.

Design: The industrial design shall be

described in writing by describing each enclosed figure (picture or drawing)

be referenced.

4- Description of the Industrial

or by giving a general description as brief as possible.

5- Type of Products: The type of products in which the industrial design is

used shall be given briefly and specifically, according to the International

Classification of Industrial Designs (Locarno).

6- Classification: Classification of the industrial design shall be provided, if

applicable, in accordance with the International Classification of Industrial

Designs (Locarno).

7- Priority and Disclosure Information: If the Industrial design has been

displayed in an official exhibition or was otherwise previously disclosed to

the public, the necessary documents showing date of display or disclosure

shall be enclosed. If the applicant is a citizen of one of the countries of the Paris

Union or a resident in one of them or owns a real and active industrial or

commercial firm therein and wishes to claim priority of an application

previously filed in one of the countries of the Union, then the data relating to

the priority application (country, application number and filing date) and the

number of the certificate and date and the classification, if any, shall be

provided. A certified copy of the previous application and a translation

thereof shall be submitted within three months from the filing date. In all

cases, relevant international agreements to which the Kingdom is party shall

apply. Data regarding previous filings (country name, application number,

filing date), certificate number and date, if any, shall also be enclosed.

8- Attachments: Attachments of the Form (figures and any other

attachments) shall be listed, and page numbers shall be provided in numbers

and letters. In the case of a priority claim, any attachments in this respect shall

Conditions for Figures (Pictures or Drawings)

or agent shall warrant that all

and shall be responsible for all the

9- Declaration: In this part, the applicant

information provided above is true

consequences of providing incorrect information.

Article (29):

The application shall include drawings or photographs showing the complete

parts of the industrial design, taking into consideration that the scope of

protection is determined on the basis of the figures enclosed at the time of

filing the application, observing the following:

1- Figures shall be in color, if protection of certain colors in the industrial

design is desired.

2- If there are figures or parts in the industrial design that do not require

protection, they shall be drawn in broken lines.

3- When more than one figure for an industrial design is submitted in one

application, the scope of protection shall cover the common elements in these

figures.A page may contain more than one figure.

5- Figures shall be clear and shall indicate the distinctive features of the

industrial design to be protected, given that such figures shall be published as

enclosed.

6- Figures may not contain any words for the purpose of description.

7- Figures shall be sequentially numbered below the figure.

Chapter 3

Provisions for Priority and Disclosure

Priority Provisions

Cases of Disclosure Not Deemed Part of Prior Art

applicant or his predecessor.

B-

Any previous filing at a national or regional office in the countries of the

Article (30):

1-

Paris Union or any international agreements to which the Kingdom is a party

shall be deemed as giving rise to the right of priority.

2- Periods of priority shall start from the filing date of the first application.

The day of filing shall not be counted in the period.

3- If the last day of the priority period is an official holiday or a day in which

the Authority is not open for receiving applications, the period shall be

extended to the first following working day.

4- The applicant claiming the privilege of priority may defer providing the

Authority with the number of the previous application and the classification

code of the application for the patent or the application for the certificate of an

industrial design for a period not exceeding three months from the filing date

of the application.

5- If the applicant claiming the privilege of priority fails to submit a certified

copy of the previous application and a translation thereof within the prescribed

period, his right of priority shall be forfeited, and this shall be recorded in the

registry of the Authority.

Article (31):

1- Cases of disclosure of inventions and industrial designs not deemed part

of prior art shall be as follows:

A- If the disclosure occurred during the last six months prior to the filing date

of the application or the date of priority claim due to abusive acts against the

If the disclosure occurred as a result of display in an officially recognized

international exhibition in one of the countries of the Paris Union during the

Correction or Addition of Priority

year preceding the filing of the application for the patent, or the six months

preceding the date of filing the application for certificate of industrial design.

2- If the applicant desires to have provisional protection for an invention or

industrial design relating to products he wishes to display in any official

exhibition, he shall apply to the Authority, enclosing a brief description of the

invention or industrial design, the drawings and a statement about the

products relating thereto. The Authority may require the applicant to submit

any other data it deems necessary. As for products displayed outside the

Kingdom, a certificate attested by an official authority specifying the displayed

product, its data and date of display shall be provided.

3- The periods referred to in the preceding two paragraphs shall not entail

extending the period of the right of priority provided for in Article 10 of the

Law.

Article (32):

1- The Authority may correct or add a priority claim subject to the following

conditions:

A- Filing a petition to the Authority to correct or add the priority claim

within two months from the expiration date of the priority period.

B- The application to which a priority is to be added or corrected shall have

been filed within two months from the expiration date of the priority claimed

or sought to be added.

C- Providing reasons for non-compliance with the priority period, proving

that non-compliance was not intentional and owing to reasons beyond control

and despite exercising due diligence.

D- Payment of petition filing fees.

Cases of Publicly-Known Varieties

If the Authority accepts the reasons stated in the petition, the priority claim

filing.

2-

shall be corrected or added and the applicant shall be notified.

3- If the Authority rejects wholly or partially the reasons stated in the petition,

it shall notify the applicant of the expected decision of rejection. The applicant

may respond to the expected rejection within one month form the date of

notification.

4- Rejection of the petition shall not entail a refund of the petition fees.

Article (33):

Filing a plant patent in another country or registering a variety in a list of

varieties of which reproduction materials are permitted for marketing in such

country shall render the variety in the application publicly-known as of the

filing date of the application, provided that the application results in granting

a plant patent or registration in the list. The variety shall also be deemed

publicly-known if it is currently exploited, registered in a variety list

maintained in a recognized professional association or included in a reference

group.

Chapter 4

Provisions for Amending and Withdrawing Protection Applications

Article (34):

1- Amendments or additions to the protection application made by the

applicant on his own or at the Authority’s request, may not exceed what was

disclosed in the application at the time of filing, provided that the fees are paid.

2- Amendment to any figure included in an application for a certificate of an

industrial design entails that the date of amendment be deemed the date of

The applicant for a patent may cancel or add any claim, provided that this3-

does not lead to any change in the unity of the invention.

4- An applicant for protection may, free of charge, correct typographical

errors or calculation errors in the application and request the introduction of

changes to the data given in the application.

5- An applicant for protection may withdraw his application as long as it has

not been finally decided upon. The request for withdrawal shall be final and

unconditional.

6- If the application for protection is made by multiple applicants, a request

for withdrawal may not be accepted unless signed by all applicants.

Article (35):

If an applicant for a patent divides his application to several applications, either

on his own or at the request of the Authority, as a result of a substantive

examination which shows that the application includes more than one

invention, he shall specify the invention included in the original application.

He may also file applications for the other inventions separately, subject to

provisions governing new applications. They shall keep the original

application filing date and enjoy the right of priority, if any.

Chapter 5

Provisions for Formal and Substantive Examination

Article (36):

Registered applications shall be examined to ensure that they satisfy the formal

conditions provided for in Article 8 of the Law and the provisions of Chapter 2

of these Regulations for each subject of protection. If the formal examination

reveals that some conditions are not satisfied, the applicant shall be requested

to satisfy them within a period not exceeding ninety days from the date of

Classification.

notification. Failure to comply within said period shall render the application

null and void.

Article (37):

1- the Authority shall notify the applicant to pay the publication fees within

three months. If he fails to pay within such period, the application shall be

lapsed,. A note to this effect shall be entered into the registry and published in

the Gazette.

2- The Authority shall assess the expenses of the substantive examination of

the application for a patent or plant patent. The applicant shall be required to

pay said expenses within three months from the date of being notified. If he

fails to pay, the application shall be forfeited and this shall be entered into the

registry and published in the Gazette.

3- Upon payment of the expenses referred to above, the Authority shall

perform the substantive examination of the patent or plant patent application.

Article (38):

The Authority shall perform the substantive examination of the patent

application to ensure that the application satisfies the conditions provided for

in Articles 4, 43, 44, 45 and 46 of the Law and the provisions stipulated in these

Regulations, including the provisions of Chapter 2. For such purpose, the

Authority may perform the following:

A- Examine claims, description, and drawings to determine the essential

components of the invention.

B- Classify the application in accordance with the International Patent

C- Assess the unity of the invention.

1- Applications

Determine the documents related to the invention by searching databasesD-

or any other sources.

E- Identify the documents closest to the invention by comparing such

documents with the invention.

F- Assess novelty by comparing the invention with the closest documents.

G- Assess the inventive step through the use of the knowledge of the ordinary

person in the art which is based on relevant documents.

H-Assess the industrial applicability of the invention.

The Authority shall prepare a report on the substantive examination which

shall state its opinion as to whether the application satisfies the conditions

provided for and the required explanations and amendments.

Article (39):

The Authority shall conduct a substantive examination of the plant patent

application to verify that the application satisfies the conditions provided for

in Articles 4, 54 and 55 of the Law and the provisions stipulated in these

Regulations, including the provisions of Chapter 2. To this end, it may

perform the following:

A- Ensure that the variety is of the specified botanical taxon. If it is not, the

applicant shall be notified and given a period of thirty days for amendment;

otherwise, the application shall be rejected.

B- Ensure that the variety is new.

C- Conduct a technical test of the variety to ensure that said variety is distinct,

uniform and stable, in accordance with the following:

for which no filings were previously made outside the

Kingdom shall be examined by the Authority or by any national or foreign

entity designated by the Authority, in accordance with UPOV Guidelines for

Provisions for Denomination of the VarietyArticle (41):

1-

the Conduct of Tests for Distinctness, Uniformity and Stability. As for unlisted

varieties, they shall be tested according to available resources.

2- As for applications for which filings were previously made outside the

Kingdom and were or would be tested abroad, the Authority may adopt the

results of the test if the test was conducted in environmental conditions similar

to the environmental conditions of the Kingdom.

The Authority shall prepare the report of substantive examination which

includes its opinion as to whether the application satisfies the prescribed

conditions and the required clarifications and amendments.

Article (40):

1- The technical test of the plant variety shall be performed in the nearest

suitable time for germination.

2- The applicant shall provide the Authority or the entity it designates with

the information and test materials in sufficient time prior to the date of

germination. The Authority shall determine the specifications of the samples

for the purpose of conducting the test in accordance with the instructions

relating to each plant variety.

3- The material provided by the applicant for the purpose of testing shall not

have been subjected to any special treatment, unless specifically required by

the Authority.

4- For the purpose of applying the provisions of Article 58(d) of the Law, the

Authority may take samples of the plant variety from the local market.

The denomination mentioned in the application for a plant patent shall be

published if it meets prescribed conditions. Any person with interest may

object to the denomination within three months from the date of publication.

Rejection and Cancellation of Denominations

satisfy the prescribed conditions, the

to provide an

2- If the denomination does not

applicant shall be notified thereof and given three months

alternative denomination. If he fails to do so or the alternative denomination

turns out not to be in accordance with the prescribed conditions, the application

shall be rejected. If the denomination is accepted, it shall be registered and the

previous denomination shall be cancelled. A note to this effect shall be

published.

3- The applicant must change the denomination provided by him within three

months if it is proven to infringe upon a trademark or the like.

4- If a denomination for the variety is used, proposed or registered in the

Kingdom or any other country, such denomination shall always be used when

dealing with the Authority, unless such denomination is rejected.

5- Any person who offers for sale the propagation material of a protected

variety, sells or markets it by any other means shall use the denomination of

that variety. This obligation shall remain valid even if the right in the plant

patent expires. A trademark, trade name or the like may be combined with the

registered denomination of the protected variety when marketing or

displaying it, if the denomination is easily identifiable.

Article (42):

1- Registration of the denomination of a plant variety shall be rejected if:

A- It does not comply with the provisions of Paragraph 1 of Article 21 of these

Regulations.

B- It is not suitable for identifying the variety, especially due to lack of

distinctness or linguistic appropriateness.

C- It is contrary to Sharia or it violates public norms.

and data that may be used in the sector of

varieties and seeds to determine species, quality, quantity, purpose, value,

D- It consists solely of marks

geographical origin or period of production.

E- It is misleading or causes confusion as to the characteristics of the variety,

its value, or geographic origin, or as to the links between the variety and

individuals, especially the plant breeder or the applicant.

F- It is identical or confusingly similar to a suggested denomination in the

Kingdom or any other country, for a previous variety of the same species or of

a species strongly related thereto, unless exploitation of the previous variety

has ceased.

2- The denomination shall be cancelled if it violates any provision of the Law

or these Regulations. The Authority shall notify the applicant or the holder of

the plant patent of the cancellation decision, and he shall be required to propose

a new denomination. Procedures provided for in Article 41 of these

Regulations shall apply.

Article (43):

1- The Authority may, in the course of conducting the substantive

examination of the applications submitted thereto, make use of search reports,

substantive examination reports and protection documents issued by patent

offices.

2- The Committee may request the Authority to expedite the examination of

a protection application at the request of the applicant claiming that there is an

infringement or imminent infringement of the subject matter of protection. The

applicant shall provide the Committee with documents supporting his request

to expedite the examination as well as any other documents required by the

Committee to prove that his claim is genuine.

violate the

belonging to

The Authority shall notify the applicant of the result of the substantive

Article (44):

1-

examination, including the report of the first substantive examination. The

applicant shall submit to the Authority amendments to the application that are

in line with the report, and if he disagrees with any item in the report, he shall

provide justification.

2- If the Authority is satisfied with the amendments or justifications

submitted by the applicant, it shall proceed with granting procedures. If

unsatisfied, it shall notify the applicant with the results of the second

substantive examination report, and the applicant shall submit to the Authority

amendments to the application that are in line with said report If the applicant

disagrees with anything in the report, he shall provide justification. If the

application has been previously disclosed or pertains to a subject excluded

from protection, the Authority may adopt the report of the first substantive

examination and issue a decision rejecting the application.

3- If the Authority is satisfied with the amendments or justifications provided

by the applicant, it shall proceed with the granting procedures; otherwise, it

shall issue a decision rejecting the application.

4- The applicant shall respond to any notifications addressed to him by the

Authority within three months from the date of notification. Failure to do so

shall result in rejection of the application.

Article (45):

The Authority may verify that the industrial design is novel and does not

provisions of Article 4 of the Law, nor includes trademarks

others, proper names or official insignias, based on the

information provided by the applicant.

8– Grant Date

9–

country)

Chapter 6

Provisions for Grant, Rejection and Invalidation

Article (46):

1- Upon ascertaining that the protection application satisfies prescribed

conditions, the Authority shall notify the applicant and require him to pay the

grant and publication fees within a period of three months. Upon payment, the

Authority shall issue the protection document and publish a note to this effect

in the Gazette. If the applicant fails to pay within the specified period, the

application shall be forfeited.

2- If the Authority finds that the protection application does not satisfy the

prescribed conditions, it shall reject the application, providing grounds

therefor. The applicant shall be notified of said decision, which shall be

published in the Gazette.

Article (47):

A- The first page of the patent document shall contain, at least, the following:

1– Name of the Inventor

2– Name of the Patent Owner

3– Address of the Patent Owner

4– Name of the Agent

5– Application Number

6– Filing Date

7– Patent Number

Priority Information (application number, priority date, and priority

C-

following:

10– Publication Number and Date

11– International Patent Classification (IPC)

12– Cited Documents

13– Title of the Invention

14– Abstract

15– Examiner’s Name

B- The first page of the layout design certificate shall contain at least the

following:

1– Name of the Design Creator

2– Name of the Certificate Owner

3– Address of the Certificate Owner

4– Name of the Agent

5– Application Number

6– Filing Date

7– Certificate Number

8– Grant Date

9– Date and Place of First Commercial Exploitation

10– Title of the Design

11– Brief Description

12– Design Drawings

The first page of the plant patent document shall contain at least the

1– Name of the Plant Breeder

2– Name of the Patent Owner

3– Address of the Patent Owner

4–Name of the Agent

5–Application Number

6– Filing Date

7–Patent Number

8– Grant Date

9– Priority Information (application number, priority date, and priority

country)

10– Names of Genus and Species

11– Common or Commercial Name

12– Abstract

13– Examiner’s Name

D- The first page of the industrial design certificate shall contain at least the

following:

1– Name of the Designer

2– Name of the Certificate Owner

3 – Address of the Certificate Owner

4 – Name of the Agent

5 –Application Number

6 –Filing Date

7 –Certificate Number

8 –Grant Date

Provisions of Invalidation

Provisions of Resumption of Patent Application Procedures

Priority Information (application number, priority date, and priority9 –

country)

10 – Number of Designs

11 – Technical Information

Article (48):

Bases for invalidating a protection document wholly or partially shall be as

follows:

1- For patents: violation of the provisions of Articles 4, 43, 44 and 45 of the

Law, and Article 14(4) of these Regulations.

2- For certificates of layout designs: violation of the provisions of Articles 2,

4, 49 and 50 of the Law.

3- For plant patents: violation of the provisions of Articles 4, 54 and 55 of the

Law.

4- For industrial design certificates: violation of the provisions of Articles 2, 4

and 59 of the Law and Article 45 of these Regulations.

The Committee shall notify the Authority of any final decision invalidating a

protection document upon issuance for registration and publication.

Chapter 7

Provisions of Resumption of Patent Application Procedures and Extension

of Deadlines

Article (49):

1- For applications rejected or forfeited as a result of the applicant’s non-

compliance with the requirements for such application within the prescribed

period due to circumstances beyond his control, the applicant may request

resumption of the application procedures in the following manner:

Provisions of Deadline Extension

petition for resumption of the application

procedures within two months after the reasons for non-compliance cease to

1-

the designated form.

2-

A- Filing with the Authority a

exist or twelve months after the decision issuance date, whichever expires first.

B- Enclosing reasons for non-compliance with the requirements within the

prescribed period and establish that non-compliance was unintentional or due

to circumstances beyond his control in spite of exercising due diligence.

C- Payment of appeal fees.

2- Upon accepting the reasons and justifications of the appeal, the Authority

shall notify the applicant thereof. The applicant shall satisfy the requirements

within a month from such notification, upon which application procedures

shall resume.

3- If the Authority rejects the reasons and justifications of the petition wholly

or partially, it shall notify the applicant of the potential rejection decision. The

applicant may provide comments concerning the potential rejection within one

month form the date of notification.

4- Petition fees may not be recovered if the petition is rejected.

5- The applicant may not file another petition for the same procedure.

Article (50):

If the applicant is unable to satisfy the requirements within the prescribed

period, he may file a petition to extend the prescribed periods provided for in

the Law and its Implementing Regulations for two additional months from the

expiry of the original period, except for the period prescribed for payment of

annual fees, subject to the following conditions:

Filing the petition prior to the expiry of the original prescribed period using

Payment of extension application fees.

1-

patentable subject

3-

4-

Extension application fees may not be recovered in case of rejection.

The applicant may not file another petition for the same prescribed period.

Chapter 8

Provisions of Infringement and Exploitation

Article (51):

The following shall not be deemed infringement on a patent:

1- Use of means subject of a patent aboard ships of other countries of the Paris

Union, whether in the body of the ship, or its machines, equipment or in any

parts thereof when the ship temporarily or incidentally enters the Kingdom's

territorial waters, provided that such use is limited to ship needs.

2- Use of equipment subject of a patent in the construction or operation of air

or land vessels, or their spare parts, belonging to another country of the Paris

Union, when such vessels enter the Kingdom temporarily or incidentally.

Article (52):

An application for compulsory license filed by any government agency to

exploit an invention shall include a statement of public interest justifications.

Such justifications shall be stated in the decision granting the license.

Chapter 9

National Security-Related Applications

Article (53):

Procedures for applications relating to national security shall be as follows:

Each government employee, whether military or civilian, who discovers a

matter relating to national security in the course of

performing his duties shall assign the same and all benefits resulting therefrom

to the relevant government agency upon its approval.

Any person, other than the above mentioned, who discovers a patentable

subject matter related to national security shall assign the same and all benefits

8-

2-

resulting therefrom to the relevant government agency upon its approval. Said

agency shall pay the person a fair compensation.

3- Any person who assigns the above-mentioned rights to the relevant

government agency in application of the two preceding paragraphs and all

persons who are aware of the assignment shall keep the patentable subject

matter and assignment confidential, and not disclose the same except to

authorized persons.

4- The relevant government agency may, upon obtaining the necessary

assignment, apply to the Authority for a protection document and enclose with

the application a request to keep the application confidential. Authority shall

apply regular procedures in processing the application and shall undertake not

to publish information thereabout.

5- The application, specification, drawings, amendments, protection

document and any copy thereof shall be kept in a sealed and stamped file, to

be at the disposal of the relevant government agency throughout the term of

protection. It may be opened only by the relevant government agency or by its

order.

6- Contents of the sealed and stamped file may not be published or accessed

by others under any circumstances.

7- The sealed and stamped file shall be delivered at any time during the term

of protection to any person at the request of the relevant government agency.

Said file shall be sealed and stamped upon its return.

The sealed and stamped file shall be sent to the relevant government

agency upon expiration of the protection period.

1-

An application to invalidate a decision granting the protection document

in accordance with this Article may not be processed except with the approval

9-

of the relevant government agency.

10- An action for infringement on such patents may not be filed.

11- Correspondences with the relevant government agency in connection with

a patent relating to national security for examination of the subject matter of

protection as well as actions taken by the agency for such purpose shall not be

considered disclosure or use, and shall not affect the entitlement to the

protection document.

12-When the Authority decides that a protection application relates to national

security and is not assigned to a relevant government agency and that it shall

not be published for national security purposes, he may order that such

application be treated as if it was assigned to the relevant government agency.

Chapter 10

Committee-Related Provisions

Article (54):

Correspondences with the Committee shall be addressed directly to its

Chairman at the designated address.

Article (55):

Actions shall be submitted to the Committee by a petition of one original and

a number of copies equal to the number of litigants, to be delivered to the

Secretariat of the Committee or by any other manner acceptable to the

Committee provided it includes the following:

The plaintiff’s full name, profession or position, place of residence, number

of his identification document as well as date and place of issuance, address

including P.O. Box, telephone number, fax number, commercial name and any

same applies to hisother means through which he may be reached. The

representative, if any.

2- The defendant’s full name, profession or position, place of residence,

address including P.O. Box, telephone number, fax number, commercial name

and any other means through which he may be reached.

3- Statement of the subject matter of the action.

4- Legal grounds and supporting evidence.

Article (56):

The notice along with a copy of the claim shall be delivered to the defendant’s

address. The notice shall be in an original and a copy. In case of multiple

defendants, the number of copies shall be equal to their number. The notice

shall contain the following:

1- Subject and date of the notice.

2- The plaintiff’s full name, profession or position, place of residence, and the

full name of his representative, his profession or position, and place of

residence.

3- Full name of the person served, his profession or position, and place of

residence.

Article (57):

Litigants shall be notified of the actions filed with the Committee as follows:

1- A copy of the notice shall be delivered to the person to be served at his

place of residence or place of work, if any; otherwise, it shall be delivered to

any person found at his place of residence who resides with him. If no one is

found or the person found refuses to receive the notice, it shall be delivered to

the Umdah of the district or the police station, as the case may be.

As for government agencies, the notice shall be delivered to the heads or2-

deputies of said agencies.

3- As for companies and private establishments, the notice shall be delivered

to one of the joint partners, the board chairman or their designees, or the owner

of the private establishment or his designee.

4- As for foreign companies with a branch or an agent in the Kingdom, notices

shall be delivered to the manager of the branch or the agent.

5- As for persons residing outside the Kingdom, they shall be notified through

the Ministry of Foreign Affairs. In this case, it is sufficient to receive a response

indicating delivery of the notice.

6- As for military personnel and employees of military agencies, notices shall

be delivered to their place of work.

7- As for prisoners, notices shall be delivered to the prison warden.

The notice shall be valid if it is delivered to the person to be served even in a

place other than his place of residence or work. In all cases, the notice may be

delivered by registered mail, and such notification shall be legally effective.

Article (58):

The Committee shall notify the Authority of all decisions issued regarding

actions filed therewith.

Article (59):

The Committee may, immediately upon filing the petition, take precautionary

and provisional measures against the defendant, provided the plaintiff

provides guarantees acceptable to the Committee to protect the defendant’s

right in case the claim is not proven.

“Receiving Office”.

If the Committee decides to seek the assistance of experts, it may order any of

Article (60):

the litigants to deposit, within a certain period of time, a sum equal to the

estimated expenses of experts by a check certified by a licensed bank in the

Kingdom. If said litigant fails to deposit the sum within the time specified by

the Committee, the other litigant may deposit this sum without prejudice to his

right of recourse against his opponent if the case is decided in his favor.

Chapter 11

Provisions for Applications Filed Pursuant to the Patent Cooperation

Treaty (PCT)

Article (61):

The Authority shall assume the duties of the application “Receiving Office" in

accordance with the provisions of PCT and its Regulations.

Article (62):

International applications received (filed) by the Authority shall be processed

in accordance with the provisions of PCT and its Regulations.

Article (63):

If the Kingdom of Saudi Arabia is appointed for protection and the application

enters into the national phase, it shall be subject to the Law of Patents,

Integrated Circuit Layout Designs, Plant Varieties and Industrial Designs and

its Implementing Regulations.

Article (64):

If the Kingdom of Saudi Arabia is appointed for protection and the application

enters into the national phase, the approved date of filing the application in the

Kingdom shall be the date of receiving the international application by the

If the Kingdom of Saudi Arabia is appointed for protection and the application

Article (65):

enters into the national phase, an annual fee shall be due for the application as

of the date of international filing. The applicant shall pay the fees for previous

years at the date of the first due fees. In case of non-payment within the period

specified by the Law, due fees shall be doubled.

Chapter 12

Concluding Provisions

Article (66):

Necessary amendments to these Regulations shall be issued by board of

directions.

Article (67):

Provisions of these Regulations shall enter into force thirty days following

publication in the Official Gazette.

A table of the expenses stipulated in these regulations

No A statement of the required financial

expenditures

Individuals Institutions

1 Seek correction or addition of precedence 400 800

2 Petition to return the application process 1000 2000

3 Seek extension of time limit 300 600

*In Saudi riyals


التشريعات يُنفّذ (1 نصوص) يُنفّذ (1 نصوص) يحلّ محل (1 نصوص) يحلّ محل (1 نصوص)
المعاهدات يخصّ (عدد السجلات 2) يخصّ (عدد السجلات 2)
لا توجد بيانات متاحة.

ويبو لِكس رقم SA065