عن الملكية الفكرية التدريب في مجال الملكية الفكرية إذكاء الاحترام للملكية الفكرية التوعية بالملكية الفكرية الملكية الفكرية لفائدة… الملكية الفكرية و… الملكية الفكرية في… معلومات البراءات والتكنولوجيا معلومات العلامات التجارية معلومات التصاميم الصناعية معلومات المؤشرات الجغرافية معلومات الأصناف النباتية (الأوبوف) القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية مراجع الملكية الفكرية تقارير الملكية الفكرية حماية البراءات حماية العلامات التجارية حماية التصاميم الصناعية حماية المؤشرات الجغرافية حماية الأصناف النباتية (الأوبوف) تسوية المنازعات المتعلقة بالملكية الفكرية حلول الأعمال التجارية لمكاتب الملكية الفكرية دفع ثمن خدمات الملكية الفكرية هيئات صنع القرار والتفاوض التعاون التنموي دعم الابتكار الشراكات بين القطاعين العام والخاص أدوات وخدمات الذكاء الاصطناعي المنظمة العمل مع الويبو المساءلة البراءات العلامات التجارية التصاميم الصناعية المؤشرات الجغرافية حق المؤلف الأسرار التجارية أكاديمية الويبو الندوات وحلقات العمل إنفاذ الملكية الفكرية WIPO ALERT إذكاء الوعي اليوم العالمي للملكية الفكرية مجلة الويبو دراسات حالة وقصص ناجحة في مجال الملكية الفكرية أخبار الملكية الفكرية جوائز الويبو الأعمال الجامعات الشعوب الأصلية الأجهزة القضائية الموارد الوراثية والمعارف التقليدية وأشكال التعبير الثقافي التقليدي الاقتصاد التمويل الأصول غير الملموسة المساواة بين الجنسين الصحة العالمية تغير المناخ سياسة المنافسة أهداف التنمية المستدامة التكنولوجيات الحدودية التطبيقات المحمولة الرياضة السياحة ركن البراءات تحليلات البراءات التصنيف الدولي للبراءات أَردي – البحث لأغراض الابتكار أَردي – البحث لأغراض الابتكار قاعدة البيانات العالمية للعلامات مرصد مدريد قاعدة بيانات المادة 6(ثالثاً) تصنيف نيس تصنيف فيينا قاعدة البيانات العالمية للتصاميم نشرة التصاميم الدولية قاعدة بيانات Hague Express تصنيف لوكارنو قاعدة بيانات Lisbon Express قاعدة البيانات العالمية للعلامات الخاصة بالمؤشرات الجغرافية قاعدة بيانات الأصناف النباتية (PLUTO) قاعدة بيانات الأجناس والأنواع (GENIE) المعاهدات التي تديرها الويبو ويبو لكس - القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية معايير الويبو إحصاءات الملكية الفكرية ويبو بورل (المصطلحات) منشورات الويبو البيانات القطرية الخاصة بالملكية الفكرية مركز الويبو للمعارف الاتجاهات التكنولوجية للويبو مؤشر الابتكار العالمي التقرير العالمي للملكية الفكرية معاهدة التعاون بشأن البراءات – نظام البراءات الدولي ePCT بودابست – نظام الإيداع الدولي للكائنات الدقيقة مدريد – النظام الدولي للعلامات التجارية eMadrid الحماية بموجب المادة 6(ثالثاً) (الشعارات الشرفية، الأعلام، شعارات الدول) لاهاي – النظام الدولي للتصاميم eHague لشبونة – النظام الدولي لتسميات المنشأ والمؤشرات الجغرافية eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange الوساطة التحكيم قرارات الخبراء المنازعات المتعلقة بأسماء الحقول نظام النفاذ المركزي إلى نتائج البحث والفحص (CASE) خدمة النفاذ الرقمي (DAS) WIPO Pay الحساب الجاري لدى الويبو جمعيات الويبو اللجان الدائمة الجدول الزمني للاجتماعات WIPO Webcast وثائق الويبو الرسمية أجندة التنمية المساعدة التقنية مؤسسات التدريب في مجال الملكية الفكرية الدعم المتعلق بكوفيد-19 الاستراتيجيات الوطنية للملكية الفكرية المساعدة في مجالي السياسة والتشريع محور التعاون مراكز دعم التكنولوجيا والابتكار نقل التكنولوجيا برنامج مساعدة المخترعين WIPO GREEN WIPO's PAT-INFORMED اتحاد الكتب الميسّرة اتحاد الويبو للمبدعين WIPO Translate أداة تحويل الكلام إلى نص مساعد التصنيف الدول الأعضاء المراقبون المدير العام الأنشطة بحسب كل وحدة المكاتب الخارجية المناصب الشاغرة المشتريات النتائج والميزانية التقارير المالية الرقابة
Arabic English Spanish French Russian Chinese
القوانين المعاهدات الأحكام التصفح بحسب الاختصاص القضائي

القانون بشأن حقوق نماذج المنفعة (القانون رقم 800/1991 المؤرخ 10 مايو 1991، بصيغته المعدلة إلى غاية القانون رقم 686 المؤرخ 21 يوليو 2006)، فنلندا

عودة للخلف
النص مستبدل  الذهاب إلى أحدث إصدار في ويبو لِكس
التفاصيل التفاصيل سنة الإصدار 2006 تواريخ بدء النفاذ : 1 يناير 1992 الاعتماد : 10 مايو 1991 نوع النص قوانين الملكية الفكرية الرئيسية الموضوع نماذج المنفعة

المواد المتاحة

النصوص الرئيسية النصوص ذات الصلة
النصوص الرئيسية النصوص الرئيسية بالإنكليزية Act on Utility Model Rights (Act No. 1991/800 of May 10, 1991, as amended up to Act No. 2006/686 of July 21, 2006)        

Act on Utility Model Rights No. 800 of May 10, 1991, as amended by Acts No. 580 of June 26, 1992, No. 1037 of November 13, 1992, No. 1410 of December 12, 1992, No. 720 of April 21, 1995, No. 1396 of December 8, 1995, No. 1696 of December 22, 1995 and No. 686 of 21 July 2006. Chapter 1 General provisions Section 1 Anyone who has made an invention, or his successor in title, shall be entitled, on application, to a utility model right to his invention, and thereby to the exclusive right to exploit the invention commercially, in accordance with the provisions of this Act. For the purposes of this Act, "invention" shall mean a technical solution that is commercially exploitable. The following, as such, shall not be regarded as inventions: (1) discoveries, scientific theories and mathematical methods; (2) aesthetic creations: (3) schemes, rules and methods for performing mental acts, playing games or doing business, and programs for computers; and (4) presentations of information. Utility model rights shall not be granted for: (1) inventions the exploitation of which would be contrary to morality or public policy; (2) plant or animal varieties; or (3) processes. Section 2 An invention must be new in relation to what was known before the filing date of the utility model right application and must differ distinctly therefrom. The prior art shall be held to comprise everything made available to the public by means of a written or oral description, by use or in any other way. Additionally, the content of utility model right, patent and design applications as filed in this country prior to the above-mentioned filing date shall be regarded as comprised in the prior art if such applications are made available to the public under Section 18 of this Act, Section 22 of the Patents Act or Section 19 of the Registered Designs Act. The requirement set out in the first paragraph, that the invention must differ distinctly from the prior art known before the filing date of the application for a utility model right, shall not apply, however, in such cases. Applications refered to in Chapter 8 a shall, for the purposes of the second paragraph, have the same legal effect as applications for utility model right filed in this country, pursuant to provisions laid down in Sections 45b and 45f. A utility model may be nevertheless be registered for inventions made available to the public within the six months preceding the filing date of the application if disclosure was the result of: 1) an evident abuse in relation to the applicant or his predecessor in title; or 2) the fact that the applicant or his predecessor in title had displayed the invention at an official or officially recognized international exhibition falling within the terms of the Convention on International Exhibitions (Finnish Treaty Series 36/37). For the purposes of the second paragraph, publication according to Article 93 of the European Patent Convention (Finnish Treaty Series 8/96) shall be equated with the making available to the public of application documents according to Section 22 of the Patents Act. What is said above, also applies to publication according to Article 158(1) of the European Patent Convention where the European Patent Office equates such publication with publication according to Article 93. Section 3 The exclusive right conferred by registration of a utility model shall imply, subject to the exceptions stated below, that no one may exploit an invention without the consent of the proprietor of the utility model right by making, offering, putting on the market or using a product protected by the utility model right, or by importing or possessing such product for these purposes. The exclusive right shall also confer on its proprietor the exclusive right to prevent any person not having his consent from supplying or offering to supply any person not entitled to exploit the invention with the means of working the invention in this country in relation to an essential element of the invention where such other person knows, or on the basis of the circumstances should have known , that the means are suitable and intended for working the invention. This provision shall not apply where the means are staple commercial products, except where such other person attempts to induce the receiver to commit any act infringing the exclusive right referred to in the first paragraph of this Section. For the purposes of this paragraph, any person using the invention in a manner referred to in the third paragraph, item (1), or (3), shall not be regarded as entitled to exploit the invention. The exclusive right shall not apply to: 1) use which is not commercial; 2) use of a product protected by registration of a utility model right that has been put on the market within the European Economic Area by or with the consent of the proprietor of the utility model right; or 3) use in experiments relating to the invention as such. Section 4 The provisions of Sections 4 and 5 of the Patents Act regarding commercial use or exploitation of an invention on foreign vessels, aircraft or other means of transport for their needs shall apply mutatis mutandis on an invention for the purposes of this Act. Section 5 An application for registration of a utility model right relating to an invention disclosed not earlier than 12 months before the date of filing in an application for a patent or for registration of a utility model filed in Finland, or in an application for a patent, an inventor’s certificate or utility model protection filed in another country party to the Paris Convention for the Protection of Industrial Property (Finnish Treaty Series 36/70 and 43/75) or the Agreement Establishing the World Trade Organization (Finnish Treaty Series 5/95), shall be deemed, for the purposes of the first and second paragraphs of Section 2, and Section 4, to have been filed at the same time as the earlier application if the applicant so requests. Such priority may also be enjoyed under an earlier application for protection filed in a country not party to the above mentioned conventions if the corresponding priority deriving from a Finnish application is granted in such country and if the laws of such country substantially conform to those conventions. The Government, or a Registering Authority appointed by the Government, shall lay down the manner in which priority claims shall be filed and the documents to be submitted in support of claims. Chapter 2 Applications for Utility Model Rights and Their Processing Section 6 Applications for utility model rights, hereinafter referred to as "utility model applications", shall be filed in writing with the National Board of Patents and Registration, acting as Registering Authority. In the cases referred to in Chapter 8 a applications may also be filed with the patent authority of another country or with an international organization. The application shall contain a description of the invention, accompanied by drawings where necessary, and a precise statement of the subject matter for which utility model right protection is sought (a claim). More specific provisions regarding drawings accompanying the application shall be laid down by decree. The description shall be sufficiently clear to enable a person skilled in the art to carry out the invention with the guidance thereof. Where the invention relates to a product of a microbiological process, Section 8a and paragraphs 6 and 8 of Section 22 of the Patents Act shall apply mutatis mutandis. The inventor’s name shall be stated in the application. If a utility model right is applied for by a person other than the inventor, the applicant shall be required to prove his title to the invention. Section 7 The description and claim shall be written in Finnish or Swedish in compliance with the language laws in force. If the claim is written in one only of the two national languages, the Registering Authority shall have the claim translated into the other national language before the utility model is registered. The applicant shall pay the prescribed translation fee. Where the applicant is a foreigner, the description shall be written in Finnish and the claim in Finnish and Swedish. However, all applicants shall be entitled to write the description of the invention and the claim in both Finnish and Swedish. The applicant shall pay the prescribed registration fee. The application shall be deemed not to have been filed until the fee has been paid. Section 8 A utility model application may also result from conversion of a pending patent application relating to the same invention into an application for a utility model right, which shall be deemed to have been made on the filing date of the patent application. However, conversion shall not be allowed after expiry of ten years from the day the patent application is deemed to have been filed. In other respects, the provisions relating to applications for utility models shall also apply in the case of such utility model applications. A patent application shall remain pending even if it is converted into a utility model application unless the applicant specifically withdraws the patent application. Section 8 a If a European patent application under the European Patent Convention is to be deemed withdrawn because it has not in due time been received by the European Patent Office from the national Registering Authority of the Contracting State of the European Patent Convention with which the application was filed, it shall, at the applicant’s request, be converted into a utility model application, provided that: 1) the request is submitted to the national Registering Authority of the Contracting State of the European Patent Convention within three months of the date the European Patent Office notified the applicant that the application is deemed withdrawn; 2) the request is received by the Registering Authority within 20 months of the filing date of the application or, where priority is claimed, from the date of priority; and 3) the applicant pays the prescribed application fee and submits the translation pursuant to Section 7 of the utility model application within the prescribed time limit. If a European patent application is to be deemed withdrawn because no translation in its language of proceedings has been submitted to the European Patent Office within the prescribed time limit, it may, at the request of the applicant, be converted into a national utility model application in compliance with the provisions of Articles 135 and 136 of the European Patent Convention. The applicant shall additionally pay the Registering Authority the prescribed application fee and submit a translation pursuant to Section 7 of the utility model application within the prescribed time limit. If a utility model application within the meaning of paragraphs 1 and 2 satisfies the requirements as to form of the European Patent Convention and its Implementing Regulations, it shall be accepted in these respects. Section 9 A utility model right may not be applied for in respect of two or more mutually independent inventions in the same application. At the applicant’s request, a utility model application may be divided, in which case the new application shall be deemed to be filed at the same time as the original application. Section 10 An applicant for and a proprietor of a utility model right not domiciled in Finland shall be required to appoint a representative domiciled in the country to represent him in all matters concerning the application and the registered utility model. Section 11 A utility model application may not be amended in such a way that a utility model right is claimed for matter not disclosed in the original application. Section 12 The Registering Authority shall check that the application complies with the provisions of the second and third paragraphs of Section 1, and Sections 6 to 11. The Registering Authority shall classify the application. The applicant or, after the utility model has been entered into the Register or been made available to the public under Section 18, anyone may submit a request in writing for an examination to assess whether an invention for which utility model registration has been granted or a utility model application filed satisfies the requirements laid down in the first paragraph of Section 2. The prescribed fee is payable for the examination. Section 13 If the applicant fails to satisfy the requirements for the application, or if the authority finds other obstacles to the registration of the utility model, the applicant shall be notified thereof by official action and be invited to file his comments or the necessary corrections within the specified period of time. If the applicant fails to file his comments or to take steps to remove, within the specified period of time, the obstacles, the application shall be dismissed. The official action issued pursuant to the first paragraph shall include a notice to that effect. A dismissed application may be reinstated if, within two months of the expiration of the time limit laid down in the official action, the applicant so requests and files comments or takes steps to correct the application and, within the same period of time, pays the prescribed reinstatement fee. An application may be reinstated only once. Section 14 If, after the applicant has filed his comments, there still remains an obstacle to the registration of the utility model which the applicant has had an opportunity to comment on, the application shall be rejected, unless there is reason to issue a further official action to the applicant. Section 15 If a person other than the applicant claims title to the invention before the Registering Authority, and if the circumstances are held to be uncertain, the Registering Authority may invite such other person to institute legal proceedings before a court of law within a specified period of time, failing which the claim will not be taken into consideration. If proceedings for title to an invention in respect of which utility model protection has been applied for are pending before a court, the processing of the utility model application may be suspended until a final decision has been given in such proceedings. Section 16 If a person proves to the Registering Authority that he has title to the invention and not the applicant, the Registering Authority shall, if such person so requests, transfer the application to him. At the same time, he shall pay a new application fee. The application shall not be dismissed, rejected, granted or withdrawn until a final decision has been taken on the request. Section 17 If the application satisfies the requirements of the second and third paragraphs of Section 1, and of Sections 6 to 11, the utility model shall be recorded in the Utility Model Register. Public notice shall be given of the registration and a certificate of registration shall be issued to the applicant. Section 18 The application file shall be available to the public as from the date of registration or no later than when 15 months have elapsed since the date the application was filed or is deemed to have been filed, or, where priority is claimed, from the priority date. At the request of the applicant, registration may be postponed for a period of no more than 15 months from the date the applications was filed or is deemed to have been filed, or, where priority has been claimed, from the priority date. If the application has been dismissed or rejected, the file shall become available to the public only if the applicant requests for reinstatement of the application or appeals against the decision by which the application was rejected. A prescribed fee is payable for the postponement of the registration. At the applicant’s request, the application file may be made available to the public earlier than provided for in the first paragraph. Chapter 3 Opportunity to require that the registration be declared invalid Section 19 If an invention for which a utility model right has been registered or an application for a utility model right does not satisfy the requirements laid down in the second to fourth paragraphs of Section 1, Section 2, the second paragaph of Section 6, or Sections 8 or 11, any person may request that the registration of the utility model be declared invalid in whole or in part. The request shall be made to the Registering Authority in writing and state the facts on which it is based. The person making the request shall pay the prescribed fee. If the payment is not made, the request will not be considered. A request that a registration be declared invalid shall not be considered if proceedings concerning transfer of the registration are pending. Section 20 The Registering Authority shall notify the proprietor of the utility model right of any request made under Section 19 and give him an opportunity to file comments on the request within a specified period of time. If a partial invalidation of the registration is concerned, the proprietor shall submit a reworded claim to the Registering Authority within the same specified period of time. If he does not oppose the request within the specified period of time, the registration shall be declared invalid in whole. If the proprietor of the utility model right opposes the request, it shall be examined by the Registering Authority. Section 21 If the Registering Authority ascertains, as a result of the request, that the invention to which the utility model right relates, or the application for a utility model does not fulfill the requirements of the second to fourth paragraphs of Section 1, of the second paragraph of Section 6, or of Section 8, 9 or 11 of the Act, the registration of the utility model shall be declared invalid in whole or in part. If a registration has been declared invalid, the decision shall be published once it becomes final. Chapter 4 Appeals Section 22 A utility model right applicant or proprietor may seek appeal of a final decision concerning registration or declaration of invalidation of the utility model right, if the decision is not in his favor. The person requesting a declaration of invalidation of a utility model may seek appeal if his request is rejected by the decision. Appeal of a decision rejecting a request for reinstatement under the third paragraph of Section 13 or a decision granting a request for transfer of an application under Section 16 may be sought by the applicant. Appeal of a decision rejecting a request for transfer of an application may be sought by the person making the request. Section 23 An appeal from a decision taken by the Registering Authority under the present Act shall be brought by filing an appeal with the Board of Appeal of the National Board of Patents and Registration. Separate provisions shall apply to the appeal procedure and the proceedings before the Board of Appeal. Chapter 5 Scope and Term of Protection Section 24 The scope of protection conferred by a utility model right shall be determined by the claim. The description and illustrations may be used to interpret the claim. Section 25 The term of protection of a utility model registration shall be four years from the filing date of the application and may, on request, be renewed twice, first for a period of four years and then for a period of two years. Section 26 Renewal of a registration shall be requested in writing from the Registering Authority not earlier than one year before and not later than six months after the registration term expires. Within the same period of time the proprietor of the utility model shall pay the prescribed renewal fee. After the expiration of the running registration term the renewal fee shall be paid raised by a prescribed amount. The renewal of a registration shall be announced. Chapter 6 Assignment, Licences and Compulsory Licences Section 27 A utility model right may be transferred. If another person has obtained the right to exploit the invention commercially (licence), such person may transfer his right to a further person only if such has been agreed. However, if the licence has been granted to an enterprise, it may be transferred together with the enterprise, unless otherwise agreed. In such case the assignor shall remain liable for compliance with the licence agreement. Section 28 The transfer of a utility model right or the grant of a licence shall be recorded in the Utility Model Register on request and on payment of the prescribed fee,. This shall also apply to the pledging of a utility model right. On proof that a licence or a pledge recorded in the Register is no longer in force, the entry shall be deleted from the Register. The first paragraph of this Section shall apply mutatis mutandis to compulsory licences and to the right referred to in the first paragraph of Section 32. The person last recorded in the Utility Model Register as the proprietor of the utility model right shall be deemed the proprietor for the purposes of legal proceedings and for other matters concerning the utility model. Section 29 If a person acting in good faith has requested the Registering Authority to record in the Register that a utility model right has been transferred to him or that he has obtained a licence to a utility model or a pledge in a utility model, an earlier transfer of the utility model right or of rights therein shall not be enforceable against him, if the other party has not previously requested registration of his acquisition in the Utility Model Register. Section 30 Where two years have elapsed since the registration of the utility model and the invention has not been worked or brought into use to a reasonable extent in Finland, any person who wishes to work the invention in the country may obtain a compulsory licence to do so unless there are legitimate grounds for the failure to work. The provisions of Sections 46 to 50 of the Patent Law relating to compulsory licences to exploit inventions protected by patents shall apply mutatis mutandis with respect to utility model rights. Chapter 7 Termination of Utility Model Right and Obligation to Furnish Information Section 31 Where a utility model has been registered in the name of a person other than the person entitled under Section 1 and where an action is brought by the person having the right to the utility model, the court shall transfer the utility model to the entitled person. Such actions shall be brought within one year of the plaintiff’s gaining knowledge of the registration and of any other circumstances on which the action is founded. Such action may not be brought more than three years after registration of the utility model if the proprietor of the utility model acted in good faith at the time the utility model was registered or was transferred to him. Section 32 Where a person dispossessed of a registration in accordance with Section 31 had, in good faith, begun commercial exploitation of the invention in this country or had made substantial preparations therefor, he shall be entitled, against reasonable remuneration and on other reasonable terms, to continue the exploitation or to commence the intended exploitation, provided that its general nature is maintained. A licensee recorded in the Utility Model Register shall have the same right subject to equivalent conditions. The right referred to in the first paragraph of this Section may only be transferred to others together with the enterprise in which it is exploited or intended to be exploited. Section 33 Where the proprietor of a utility model right notifies in writing that he relinquishes his registration,, the Registering Authority shall delete the utility model from the Register. Where a utility model is seized for debt or is subject to a pledge that has been recorded in the Register or if an action for transfer of the registration is pending, the utility model may not be deleted from the Register at the proprietor’s request as long as the seizure or pledge is in force or until a final decision has been given in the action. Section 34 Where a utility model registration has been transferred by final decision of a court, the Registering Authority shall publish a notice to that effect. Section 35 The provisions of Section 56 of the Patents Act concerning the obligation to furnish information in respect of a patent shall apply mutatis mutandis to a utility model right. Chapter 8 Liability, Payment of Compensation and Court Proceedings Section 36 The court may forbid any person who infringes the exclusive right conferred by a utility model right from continuing or repeating the act.

Section 36 a

When hearing an action referred to in section 36 the court may at the utility model holder’s request prohibit the keeper of a transmitter, server or other similar device or other service provider acting as an intermediary, under penalty of a fine, from continuing the use alleged to infringe the utility model (injunction order) unless it can be considered disproportionate in view of the rights of the alleged infringer of the utility model or in view of the rights of the intermediary or utility model holder.

Before the bringing of an action referred to in section 36 the court referred to in that section may, at the utility model holder’s request, issue an injunction, if the preconditions for that set out in subsection 1 exist and if it is obvious that the realisation of the utility model holder’s rights otherwise would be seriously endangered. The court must provide both for the party against whom the injunction is sought and for the party who is claimed to infringe the utility model an opportunity to be heard. Communications to the parties against whom the injunctions have been sought may be delivered by mail or by facsimile or e-mail. Otherwise the provisions of Chapter 8 of the Code of Judicial Procedure apply to the processing of the case.

The court may, on request, issue the injunction referred to in subsection 2 as an interlocutory injunction without hearing the alleged infringer, if the urgency of the case of necessity requires that. The injunction remains in force until ordered otherwise. After the injunction is issued, the alleged infringer must without delay be provided an opportunity to be heard. When the alleged infringer has been heard, the court must decide without delay whether to keep the injunction in force or withdraw it.

An injunction issued under this section must not endanger the right of a third party to send and receive messages. Subject to the provisions of Chapter 7, section 7, of the Code of Judicial Procedure, the injunction comes into force when the plaintiff gives the bailiff the security referred to in Chapter 7, section 16, of the Execution Act (37/1895). An injunction issued under subsection 2 or 3 of this section lapses if the action referred to in section 36 is not brought within a month from the issuance of the injunction.

The party who has demanded the injunction must compensate the party against whom the injunction is issued as well as the alleged infringer for the damage caused by the implementation of the injunction and for any other costs resulting from the case, if the action referred to in section 36 is rejected or ruled inadmissible, or if the processing of the case is removed from the cause list because the plaintiff has abandoned his/her action or failed to arrive to the court. The same applies if the injunction is withdrawn under subsection 3 or lapses under subsection 4. When an action is brought for compensation for damage and costs, the provisions of Chapter 7, section 12, of the Code of Judicial Procedure apply.

Section 37 Any person who intentionally or negligently infringes a utility model right shall be liable to pay reasonable compensation for the exploitation of the invention, as also compensation for other damages caused by the infringement. If there is only slight negligence, the compensation may be adjusted accordingly. A person found guilty of utility model right infringement that is neither intentional nor negligent shall pay compensation for the exploitation of the invention if and to the extent held reasonable. An action for compensation for utility model right infringement may only be brought with respect to damages suffered during the five years preceding the institution of the action. If an action is not instituted within that period, the right to compensation shall be forfeited. Section 38 The provisions of Section 59 of the Patents Act concerning measures to prevent further infringement shall apply mutatis mutandis to utility model rights.

Section 38 a

(In a dispute that concerns an infringement of a utility model the court may, at the plaintiff’s request, order the defendant to compensate the plaintiff for the cost occurred to him/her for publishing, by taking suitable measures, information concerning the final decision in which the defendant is found to have infringed the utility model right. Such an order may not be given if the dissemination of the information is limited elsewhere in the law. In considering the issuance and contents of the order, the court must pay attention to the general significance of the publication of the issue, the kind and scope of the infringement, the costs involved in the publishing process and other corresponding facts.

The court lays down a maximum amount for the reasonable publishing cost to be paid by the defendant. The plaintiff is not entitled to the compensation, if information about the decision has not been published within a period laid down by the court counted from the date when the final decision was issued.

Section 39 Any person who infringes an exclusive right in a utility model right intentionally, shall, unless the act is punishable as an industrial property right offence under Section 2 of Chapter 49 of the Penal Code, be liable to a fine for violation of a utility model right. Indictment for an offence referred to in the first paragraph may be brought by the Public Prosecutor only if so requested by the injured party. Section 40 Any person who intentionally or by negligence, other than slight negligence, fails to comply with an obligation under Section 35, shall be liable to a fine for failure to comply with the obligation to furnish information relating to a utility model. Any person who provides false information in a case referred to in the said Section shall also be liable to the same penalty, unless the act is punishable under the Penal Code. Indictment for an offence referred to in the present Section may be brought by the Public Prosecutor only if so requested by the injured party. Section 41 Where a utility model registration has been declared invalid by a final decision, no penalty, payment of compensation or other sanction may be ordered under Section 2 of Chapter 49 of the Penal Code or Sections 36 to 39 of this Act. Where the plaintiff in an action for infringement of a utility model right claims that the registration does not comply with this Act, the court may, at the defendant’s request, stay proceedings or the decision until a final decision has been taken on the invalidity claim. Where no request for invalidation has been filed with the Registering Authority, the court shall order the defendant, in connection with the stay of proceedings, to file such request within the period of time it shall determine. Section 42 Any person who wishes to bring an action for transfer of a utility model right or for grant of a compulsory licence shall give the Registering Authority notice thereof and shall notify all persons recorded in the Utility Model Register as licensees under the utility model right or as proprietors of a pledge therein. If a licensee wishes to bring an action for utility model infringement he shall notify the proprietor of the right thereof. The requirement to notify pursuant to the first paragraph shall be deemed satisfied when notification by registered letter has been sent to the addresses recorded in the Utility Model Register. If the plaintiff cannot prove, at the time the action is brought, that he has given notice pursuant to the first paragraph, he shall be given a sufficient period of time to do so. If he does not avail himself of that period of time, the action shall be dismissed. Section 43 The District Court of Helsinki shall be the competent court to hear proceedings in respect of: 1) proper title to an invention for which a utility model right has been sought; 2) transfer of a utility model right; 3) grant of compulsory licences, amendment of conditions for compulsory licences or revocation of a right referred to in the first paragraph of Section 32; 4) infringement of a utility model right or non-compliance with the obligation to furnish information relating to a utility model; or 5) assessment of the compensation due under Section 37. Section 44 The provisions of Sections 66 and 67 of the Patents Act shall apply mutatis mutandis to the proceedings referred to in Section 43. Section 45 The court shall communicate to the Registering Authority a copy of decisions given in the proceedings referred to in Section 43 together with a statement as to whether the decision is final. Chapter 8 a International Applications Section 45 a In this Act "an international application" shall mean an application relating to a utility model filed under the Patent Cooperation Treaty (Finnish Treaty Series 58/80). International applications shall be filed with a registering authority or an international organization (receiving office) authorized under the Patent Cooperation Treaty and its Regulations to receive such applications. The receiving office in Finland shall be the National Board of Patents and Registration, as laid down by Government decree. Applicants filing an international utility model application in Finland shall pay the prescribed fees. Unless otherwise provided in Sections 45b to 45f, the provisions Chapter 3 of the Patents Act in respect of the processing of international patent applications shall mutatis mutandis apply to the processing of international utility model applications designating Finland. Section 45b An international utility model application to which a receiving office has assigned an international filing date shall have the same effect in this country as a Finnish utility model application filed on the same date. The second sentence in the second paragraph of Section 2 shall only apply to an international application that has been pursued under Section 45d. Section 45c An international utility model application shall be deemed withdrawn as far as the designation of Finland is concerned in the cases referred to in Article 24(1)(i) and (ii) of the Patent Cooperation Treaty. Section 45d If an applicant wishes to pursue an international utility model application in Finland, he shall file with the Patent Authority a translation in Finnish or Swedish of the international application within 31 months of the international filing date or, where priority is claimed, of the priority date, or a copy of the application where it is written in Finnish or Swedish. The applicant shall pay the prescribed registration fee to the Registering Authority within the same period. If the applicant has paid the prescribed registration fee within the time limit laid down in the first or second paragraph, the required translation or a copy of the application may be filed within a further period of two months, provided the prescribed additional fee is paid within that same period. If the application, in cases referred to in the first and second paragraphs of this Section, does not satisfy the requirements of this Act, the applicant may within a period of two months from the time limits referred to in the first and second paragraphs render the application to comply with the requirements as to form and content of the Implementing Regulations of the Patent Cooperation Treaty. If the applicant does not satisfy the requirements of this Section, the application shall be deemed withdrawn as far as Finland is concerned. Section 45e Where an applicant withdraws his request for international preliminary examination or his statement of his intention to use the results of such examination in applying for a utility model right for Finland, the international utility model application shall be deemed withdrawn as far as Finland is concerned. The application shall not be deemed withdrawn, however, if withdrawal is made prior to the expiration of the time limit laid down in the first paragraph of Section 45d and if the applicant also pursues the application within the time limit laid down in the first, third or fourth paragraph of Section 45d. Section 45f Where an international application has been pursued under Section 45d, provisions of Chapters 2 and 5 shall apply in respect of the application and examination, unless otherwise provided in this Section or in Sections 34 to 38 of the Patents Act. However, the application may be taken up for examination prior to expiration of the period laid down in the first and second paragraphs of Section 45d only if so requested by the applicant. The obligation under Section 10 of the applicant to have a representative domiciled in the country does not begin until the date when the application may be taken up for examination. When 18 months have elapsed since the date of filing of the application or, if priority is claimed, from the priority date, and the applicant has satisfied his obligation under Section 45d to submit a translation or, where the application has been written in Finnish or Swedish, the applicant has submitted a copy of the application to the Registering Authority, the application documents shall be made available to the public even before the applicant has pursued the application. Chapter 9 Special Provisions Section 46 Separate provisions shall apply to the amounts of fees to be paid under the present Act. Section 47 More detailed provisions to regulate utility model applications, the Utility Model Register and also the Registering Authority shall be issued by Government decree. Detailed regulations concerning utility model applications and their processing may be issued by the Registering Authority. Section 48 The provisions of Section 75 of the Patents Act concerning the obligation to surrender rights in an invention in certain cases and the compensation to be paid therefor shall apply mutatis mutandis to utility model rights. Separate provisions shall apply in respect of inventions of importance to the defence of the country. Chapter 10 Entry into Force and Transitional Provisions Section 49 This Act shall enter into force on a date to be decreed by the Government. Applications filed prior to the entry into force of this Act may not serve as a basis for a priority claim under Section 5. Patent applications filed or deemed to have been filed prior to the entry into force of this Act may not be converted into applications for utility models under Section 8.

Act 686/2006 comes into force on 1 September 2006.

Section 36 a of this Act also applies to disputes that have been pending before the entry into force of this Act.

The provisions applicable at the entry into force of this Act apply to disputes pending before the entry into force of this Act, instead of the provisions of section 38 a of this Act.


التشريعات يحلّ محل (2 نصوص) يحلّ محل (2 نصوص) يحلّ محله (3 نصوص) يحلّ محله (3 نصوص)
لا توجد بيانات متاحة.

ويبو لِكس رقم FI088