Propiedad intelectual Formación en PI Respeto por la PI Divulgación de la PI La PI para... La PI y… La PI en… Información sobre patentes y tecnología Información sobre marcas Información sobre diseños industriales Información sobre las indicaciones geográficas Información sobre las variedades vegetales (UPOV) Leyes, tratados y sentencias de PI Recursos de PI Informes sobre PI Protección por patente Protección de las marcas Protección de diseños industriales Protección de las indicaciones geográficas Protección de las variedades vegetales (UPOV) Solución de controversias en materia de PI Soluciones operativas para las oficinas de PI Pagar por servicios de PI Negociación y toma de decisiones Cooperación para el desarrollo Apoyo a la innovación Colaboraciones público-privadas Herramientas y servicios de IA La Organización Trabajar con la OMPI Rendición de cuentas Patentes Marcas Diseños industriales Indicaciones geográficas Derecho de autor Secretos comerciales Academia de la OMPI Talleres y seminarios Observancia de la PI WIPO ALERT Sensibilizar Día Mundial de la PI Revista de la OMPI Casos prácticos y casos de éxito Novedades sobre la PI Premios de la OMPI Empresas Universidades Pueblos indígenas Judicatura Recursos genéticos, conocimientos tradicionales y expresiones culturales tradicionales Economía Financiación Activos intangibles Igualdad de género Salud mundial Cambio climático Política de competencia Objetivos de Desarrollo Sostenible Tecnologías de vanguardia Aplicaciones móviles Deportes Turismo PATENTSCOPE Análisis de patentes Clasificación Internacional de Patentes ARDI - Investigación para la innovación ASPI - Información especializada sobre patentes Base Mundial de Datos sobre Marcas Madrid Monitor Base de datos Artículo 6ter Express Clasificación de Niza Clasificación de Viena Base Mundial de Datos sobre Dibujos y Modelos Boletín de Dibujos y Modelos Internacionales Base de datos Hague Express Clasificación de Locarno Base de datos Lisbon Express Base Mundial de Datos sobre Marcas para indicaciones geográficas Base de datos de variedades vegetales PLUTO Base de datos GENIE Tratados administrados por la OMPI WIPO Lex: leyes, tratados y sentencias de PI Normas técnicas de la OMPI Estadísticas de PI WIPO Pearl (terminología) Publicaciones de la OMPI Perfiles nacionales sobre PI Centro de Conocimiento de la OMPI Informes de la OMPI sobre tendencias tecnológicas Índice Mundial de Innovación Informe mundial sobre la propiedad intelectual PCT - El sistema internacional de patentes ePCT Budapest - El Sistema internacional de depósito de microorganismos Madrid - El sistema internacional de marcas eMadrid Artículo 6ter (escudos de armas, banderas, emblemas de Estado) La Haya - Sistema internacional de diseños eHague Lisboa - Sistema internacional de indicaciones geográficas eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange Mediación Arbitraje Determinación de expertos Disputas sobre nombres de dominio Acceso centralizado a la búsqueda y el examen (CASE) Servicio de acceso digital (DAS) WIPO Pay Cuenta corriente en la OMPI Asambleas de la OMPI Comités permanentes Calendario de reuniones WIPO Webcast Documentos oficiales de la OMPI Agenda para el Desarrollo Asistencia técnica Instituciones de formación en PI Apoyo para COVID-19 Estrategias nacionales de PI Asesoramiento sobre políticas y legislación Centro de cooperación Centros de apoyo a la tecnología y la innovación (CATI) Transferencia de tecnología Programa de Asistencia a los Inventores (PAI) WIPO GREEN PAT-INFORMED de la OMPI Consorcio de Libros Accesibles Consorcio de la OMPI para los Creadores WIPO Translate Conversión de voz a texto Asistente de clasificación Estados miembros Observadores Director general Actividades por unidad Oficinas en el exterior Ofertas de empleo Adquisiciones Resultados y presupuesto Información financiera Supervisión
Arabic English Spanish French Russian Chinese
Leyes Tratados Sentencias Consultar por jurisdicción

Ley sobre Modelos de Utilidad (Ley N° 123 del 13 de abril de 1959, modificada por la Ley N° 220 de 22 de deciembre de 1999), Japón

Atrás
Versión obsoleta  Ir a la versión más reciente en WIPO Lex
Detalles Detalles Año de versión 2001 Fechas Adoptado/a: 13 de abril de 1959 Tipo de texto Principal legislación de PI Materia Patentes (Invenciones), Modelos de utilidad, Observancia de las leyes de PI y leyes conexas, Organismo regulador de PI

Documentos disponibles

Textos principales Textos relacionados
Textos principales Textos principales Inglés Utility Model Act (Act No. 123 of April 13, 1959, as amended up to Act No. 220 of December 22, 1999)        
 Utility Model Act (Act No. 123 of April 13, 1959, as amended by Act No. 220 of December 22, 1999)

YH JAPAN

(Provisional Translation)

Utility Model Act* (Act No. 123 of April 13, 1959,

as amended by Act No. 220 of December 22, 1999)

TABLE OF CONTENTS

Articles

Chapter I: General Provisions Purpose......................................................................... 1

Invitation to Amendment.............................................. 6bis

Chapter III: Technical Opinion as to Registrability of Utility Model Request for Technical Opinion as to Registrability of

Chapter IV: The Utility Model Right

Definitions.................................................................... 2 Amendment .................................................................. 2bis Dismissal of Procedure................................................. 2ter Capacity of Associations, etc., which are not Legal Entities to Proceed Before the Office ........................... 2quater Application mutatis mutandis of Patent Law................ 2quinquies

Chapter II: Utility Model Registration and Applications Therefor Registrability of Utility Models.................................... 3-3bis Unregistrable Devices .................................................. 4 Applications for Utility Model Registration ................. 5-6

First-to-File Rule .......................................................... 7 Priority Claim Based on Utility Model Application ..... 8 Withdrawal of Earlier Application, etc......................... 9 Conversion of Applications .......................................... 10 Application mutatis mutandis of Patent Law................ 11

Utility Model ................................................................ 12-13

1. The Utility Model Right Registration of Establishment of Utility Model Right .. 14 Correction of Specification or Drawings ...................... 14bis

Relationship with Another’s Registered Utility Model,

Non-Exclusive License due to Working Prior to

Arbitration Decision on Grant of Non-Exclusive

Term of Utility Model Right......................................... 15 Effects of Utility Model Right...................................... 16

etc. ................................................................................ 17 Exclusive Licenses ....................................................... 18 Non-Exclusive Licenses ............................................... 19

Registration of Demand for Invalidation Trial ............. 20

License in Case of Non-Working ................................. 21 Arbitration Decision on Grant of Non-Exclusive License on One’s Own Registered Utility Model ......... 22 Arbitration Decision on Grant of Non-Exclusive License in Public Interest ............................................. 23 Transfer, etc. of Non-Exclusive License....................... 24 Pledges ......................................................................... 25 Application mutatis mutandis of Patent Law................ 26

2. Infringement 27Injunctions....................................................................

JP039EN Models, Law (Consolidation), page 1/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN Acts Deemed to be Infringement .................................. 28 Presumption, etc. of Amount of Damage...................... 29 Warning in the Form of Report of Technical Opinion as to Registra bility of Utility Model ............................. 29bis Responsibility of Owner of Utility Model Right, etc.... 29ter Application mutatis mutandis of Patent Law................ 30

3. Annual Fees Annual Fees.................................................................. 31 Time Limit for Payment of Annual Fees ...................... 32 Reduction or Deferment of Payment of Annual Fees or Exemption Therefrom .................................................. 32bis Late Payment of Annual Fees....................................... 33 Restoration of Utility Model Right by Late Payment of Annual Fees.................................................................. 33bis Restriction on Effects of Utility Model Right Restored 33ter Refund of Annual Fees ................................................. 34 [Deleted]....................................................................... 35 Application mutatis mutandis of Patent Law................ 36

Chapter V: Trial Trial for Invalidation of Utility Model Registration ..... 37 Formal Requirements of Demands for Trial ................. 38 Submission of Written Reply, etc. ................................ 39 Relationship with Litigation ......................................... 40-40bis Application mutatis mutandis of Patent Law................ 41

Chapter VI: Retrial and Litigation Demand for Retrial ....................................................... 42-43 Restriction on Effects of Utility Model Right Restored by Retrial ...................................................................... 44 Application mutatis mutandis of Patent Law................ 45 [Deleted]....................................................................... 46 Actions Against Trial Decisions, etc. ........................... 47 Action on Amount of Remuneration ............................ 48 Relationship Between Administrative Appeal and Litigation ...................................................................... 48bis

Chapter VII: Special Provisions Concerning International Applications under the Patent Cooperation Treaty Utility Model Application Based on International Application ................................................................... 48ter Translation of International Utility Model Application in Foreign Language..................................................... 48quater Submission of Paper and Invitation to Correction, etc. 48quinquies Effect, etc., of Request, Description, etc., of International Application.............................................. 48sexies Submission of Drawings............................................... 48septies Special Provisions Concerning Amendment ................ 48octies Special Provisions Concerning Registrability of Utility Model ........................................................................... 48novies Special Provisions Concerning Priority Claim Based on Utility Model Application, etc. ................................ 48decies Special Provisions Concerning Conversion of Appli cations.................................................................. 48undecies Special Provisions Concerning Time Limit for Payment of Annual Fees............................................... 48duodecies Time Limit for Making Request for Technical Opinion as to Registrability of Utility Model ............................. 48terdecies Special Provisions Concerning Grounds for Invalidation................................................................... 48quater decies Application mutatis mutandis of Patent Law................ 48quindecies

JP039EN Models, Law (Consolidation), page 2/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN International Application Recognized as Utility Model Application by Decision ............................................... 48sedecies

Chapter VIII: Miscellaneous Provisions Registration in Utility Model Register.......................... 49 Issuance of Utility Model Registration Certificate ....... 50 Special Provisions for Utility Model Registrations or Utility Model Rights Based on Two or More Claims ... 50bis Indication of Existence of Utility Model Registration.. 51 Prohibition of False Marking........................................ 52 Utility Model Gazette ................................................... 53 Fees .............................................................................. 54 Application mutatis mutandis of Patent Law................ 55

Chapter IX: Penal Provisions Offense of Infringement ............................................... 56 Offense of Fraud........................................................... 57 Offense of False Marking ............................................. 58 Offense of Perjury, etc.................................................. 59 Offense of Divulging Secrets........................................ 60 Dual Liability ............................................................... 61 Administrative Penalties............................................... 62-64 Attached Table (Related to Section 54)

CHAPTER I GENERAL PROVISIONS

Purpose

1. The purpose of this Law shall be to encourage devices by promoting the protection and utilization of devices relating to the shape or construction of articles or a combination of articles, so as to contribute to the development of industry.

Definitions

2.—(1) “Device” in this Law means the creation of technical ideas by which a law of nature is utilized.

(2) “Registered utility model” in this Law means a device for which a utility model registration has been effected.

(3) “Working” of a device in this Law means acts of manufacturing, using, assigning, leasing, importing or offering for assignment or lease (including displaying for the purpose of assignment or lease—hereinafter the same) of, articles embodying the device.

Amendment

2bis.—(1) A person who is proceeding on a utility model application or a demand or taking any other procedure relating to a utility model registration (hereinafter referred to as “procedure”) may make amendments only during the pendency of the case before the Patent Office. However, he may not amend the specification, the drawings or the abstract attached

JP039EN Models, Law (Consolidation), page 3/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN to the request after the expiration of the time limit to be set by Cabinet Order from the filing date of the utility model application.

(2) An amendment of the specification or drawings under the principal sentence of the preceding subsection shall remain within the scope of the features disclosed in the specification or drawings originally attached to the request.

(3) The Commissioner of the Patent Office may invite amendment, designating an adequate time limit, in the following cases:

(i) when the requirements of Sections 7(1) to (3) or 9 of the Patent Law (Law No. 121 of 1959) as applied under Section 2quinquies of this Law have not been complied with;

(ii) when the formal requirements specified in this Law or in an order or ordinance thereunder have not been complied with;

(iii) when the fees to be paid under Section 32(1) have not been paid with respect to a procedure;

(iv) when the fees to be paid under Section 54(1) or (2) have not been paid with respect to a procedure.

(4) Any amendment (except in the case of the payment of the annual fee or fees) shall be submitted in writing.

Dismissal of Procedure

2ter. The Commissioner of the Patent Office may dismiss a procedure when a person whom he has invited to make amendment in accordance with Section 2bis(3) or Section 6bis fails to do so within the time limit designated in accordance with that subsection or that Section.

Capacity of Associations, etc., which are not Legal Entities to Proceed Before the Office

2quater.—(1) An association or foundation which is not a legal entity but for which an officer representing it or an administrator has been designated may, in its name:

(i) make a request for technical opinion as to registrability of a utility model referred to in Section 12(1);

(ii) demand a trial;

(iii) demand a retrial against a final and conclusive trial decision.

(2) An association or foundation which is not a legal entity but for which an officer representing it or an administrator has been designated may be made a party in its name to a retrial against a final and conclusive trial decision.

Application mutatis mutandis of Patent Law

JP039EN Models, Law (Consolidation), page 4/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN 2quinquies.—(1) Sections 3 and 5 of the Patent Law shall apply mutatis mutandis to

the time limits and dates prescribed in this Law.

(2) Sections 7 to 9, 11 to 16, 18bis to 24 of the Patent Law shall apply mutatis mutandis to the procedure.

(3) Section 25 of the Patent Law shall apply mutatis mutandis to utility model rights and other rights relating to utility model registrations.

(4) Section 26 of the Patent Law shall apply mutatis mutandis to utility model registrations.

CHAPTER II UTILITY MODEL REGISTRATION AND APPLICATIONS THEREFOR

Registrability of Utility Models

3.—(1) Any person who has made a device which is industrially applicable and which relates to the shape or construction of articles or a combination of articles may obtain a utility model registration therefor, except in the case of the following devices:

(i) devices which were publicly known in Japan or elsewhere prior to the filing of the utility model application;

(ii) devices which were publicly worked in Japan or elsewhere prior to the filing of the utility model application;

(iii) devices which were described in a distributed publication or made available to the public through electric telecommunication lines in Japan or elsewhere prior to the filing the utility model application.

(2) Where a device could very easily have been made, prior to the filing of the utility model application, by a person with ordinary skill in the art to which the device pertains, on the basis of a device or devices referred to in any of the paragraphs of the preceding subsection, a utility model registration shall not be effected for such a device notwithstanding the preceding subsection.

3bis. Where a device claimed in a utility model application is identical with a device or invention (excluding a device or invention made by the same person as the creator of the device claimed in the utility model application) disclosed in the specification or drawings originally attached to the request of another application for a utility model registration or for a patent (in the case of the foreign language file referred to in Section 36bis(2) of the Patent Law, the foreign language file referred to in Section 36bis(1) of said Law) which was filed prior to the filing date of the utility model application and for which the Util ity Model Gazette which states the matter referred to in each paragraph of Section 14(3) (hereinafter referred to as “the Gazette containing the Utility Model”) was published under said subsection after the filing of the utility model application or for which the Patent Gazette which states the matter referred to in each paragraph of Section 66(3) of the Patent Law (hereinafter referred to “the

JP039EN Models, Law (Consolidation), page 5/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN Pat ent Gazette”) was published under said subsection of said Law or the laying open for publicinspe ction (Kôkai) is effected, the utility model registration shall not be granted for the device notwithstanding Section 3(1). However, this provision shall not apply where, at the time of filing of the utility model application, the applicant of the utility model application and the applicant of the other application for a utility model registration or the application for a patent are the same person.

Unregistrable Devices

4. Devices which are liable to contravene public order, morality or public health shall not be the subject of a utility model registration notwithstanding Section 3(1).

Applications for Utility Model Registration

5.—(1) Any person desiring a utility model registration shall submit a request to the Commissioner of the Patent Office stating the fo llowing:

(i) the name and the domicile or residence of the applicant for a utility model registration;

(ii) the name and the domicile or residence of the creator.

(2) The request shall be accompanied by the specification, the drawings and the abstract.

(3) The specification under Subsection (2) shall state the following:

(i) the title of the device;

(ii) a brief explanation of the drawings;

(iii) a detailed explanation of the device;

(iv) utility model claim(s).

(4) The detailed explanation of the device under Paragraph (iii) of the preceding subsection shall state in a manner sufficiently clear and complete for the deviceto be carried out by a person having ordinary skill in the art to which the device pertains as provided for in an ordinance of the Ministry of Economy, Trade and Industry.

(5) In the utility model claim under Subsection (3)(iv), there shall be set forth, by statements separated on a claim by claim basis, all matters which an applicant for a utility model registration considers necessary in defining a device for which a utility model registration is sought.

(6) The statements of the utility model registration claim under Subsection (3)(iv) shall comply with each of the following paragraphs as being:

(i) the device for which a utility model registration is sought shall be described in the detailed explanation of the device;

JP039EN Models, Law (Consolidation), page 6/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (ii) a device for which a utility model registration is sought shall be clear;

(iii) each claim shall be concise;

(iv) in addition, the utility model registration claim(s) shall comply with an ordinance of the Ministry of Economy, Trade and Industry.

(7) The abstract under Subsection (2) shall state the summary of the device disclosed in the specification or drawings and other matters provided for in an ordinance of the Ministry of Economy, Trade and Industry.

6. Where there are two or more devices, they may be the subject of a utility model application in the same request provided that these devices are of a device claimed in one claim (hereinafter referred to as “the specified device”) and of another or other devices having the relationship as indicated below with respect to such specified device:

(i) devices of which the industrial applicability and the problem to be solved are the same as those of the specified device;

(ii) devices of which the industrial applicability and the substantial part of the features stated in the claim are the same as those of the specified device;

(iii) devices having a relationship as provided for in Cabinet Order.

Invitation to Amendment

6bis. The Commissioner of the Patent Office may invite amendment, designating an adequate time limit, where a utility model application falls under any of the following paragraphs:

(i) the device claimed in the utility model application is not a device that relates to the shape or construction of articles or a combination of articles;

(ii) the device claimed in the utility model application is not registrable in accordance with Section 4;

(iii) the utility model application does not comply with the requirements of Section 5(6)(iv) or Section 6;

(iv) where the specification or drawings attached to the request does not contain the necessary matters or the description in the specification or drawings is very unclear.

First-to-File Rule

7.—(1) Where two or more utility model applications relating to the same device are filed on different dates, only the first applicant may obtain a utility model registration for the device.

(2) Where two or more utility model applications relating to the same device are filed on the same date, none of the applicants shall obtain a utility model registration for the device.

JP039EN Models, Law (Consolidation), page 7/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (3) Where a device claimed in a utility model application is the same as an invention

claimed in a patent application and the applications are filed on different dates, the applicant for a utility model registration may obtain registration only if his application was filed before the patent application.

(4) Where a utility model application or a patent application is abandoned, withdrawn or dismissed, such application shall, for the purposes of the three preceding subsections, be deemed never to have been made.

(5) Where an examiner’s decision or trial decision that a patent application is to be refused has become final and conclusive, such application shall, for the purposes of Subsection (3), be deemed never to have been made. However, this provision shall not apply where an examiner’s decision or a trial decision that the patent application is to be refused under the provision of the last sentence of Section 39(2) of the Patent Law becomes final and conclusive.

(6) A utility model application or a patent application filed by a person who is neither the creator nor the inventor nor the successor in title to the right to obtain a utility model registration or patent shall, for the purposes of Subsections (1) to (3), be deemed not to be a utility model application or a patent application.

(7) If no agreement is reached or no consultations is possible under Section 39(4) of the Patent Law, the applicant for a utility model registration shall not obtain registration for such device.

Priority Claim Based on Utility Model Application

8.—(1) Any person desiring a utility model registration may declare a priority claim for the device claimed in a utility model application on the basis of the device which has been disclosed in the specification or drawings originally attached to the request (in the case of a foreign language file application referred to in Section 36bis(2) of the Patent Law, in the foreign language file referred to in Section 36bis(1) of the Patent Law) of a utility model or a patent application in which he has the right to obtain a utility model registration or a patent and which has been filed earlier (hereinafter referred to as “earlier application”) except in the following cases:

(i) the utility application concerned is not one filed within one year from the filing date of the earlier application;

(ii) the earlier application is a new utility model application divided out from a utility model application under Section 44(1) of the Patent Law as applied under Section 11(1) of the Utility Model Law, a utility model application converted from an application under Section 10(1) or (2) of the Utility Model Law, a new patent application divided out from a patent application under Section 44(1), or a patent application converted from an application under Section 46(1) or (2) of the Patent Law;

(iii) at the time when the utility model application concerned is filed, the earlier application has been abandoned, withdrawn or dismissed;

JP039EN Models, Law (Consolidation), page 8/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (iv) at the time when the utility model application concerned is filed, the examiner’s

decision or the trial decision on the earlier application has become final and conclusive;

(v) at the time when the utility model application concerned is filed, the registration of establish ment referred to in Section 14(2) with respect to the earlier application has been effected.

(2) For devices which are amongst those claimed in a utility model application containing a priority claim under the preceding subsection and which are disclosed in the specifications or drawings originally attached to the request of an earlier application whose priority is so claimed [in the case where the earlier application contains a priority claim under that subsection or Section 41(1) of the Patent Law, or a priority claim under Section 43(1) or Section 43bis(1) or (2) of the Patent Law (including its application under Section 11(1) of this Law), excluding the devices disclosed in the file (limited to those equivalent to the specifications and drawings) submitted at the time of the filing of the application whose priority is claimed for the earlier application; in the case where the earlier application is a foreign language file application referred to in Section 36bis(2) of the Patent Law, in the foreign language file referred to in Section 36bis(1) of that Law], the utility model application shall be considered to have been filed at the time when the earlier application was filed for the purposes of Section 3, the principal sentence of Section 3bis, Section 7(1) to (3), Section 30(1) to (3) of the Patent Law as applied under Section 11(1) of this Law, Section 17 of this Law, Sections 69(2)(ii), 79, 81 and 82(1) of the Patent Law as applied under Section 26 of this Law, Sections 39(3) and (4) and 72 of the Patent Law, Sections 26, 31(2) and 32(2) of the Design Law (Law No. 125 of 1959) and Sections 29 and 33bis(3) and Section 33ter(3) (including its application mutatis mutandis under Section 68(3) of the Trademark Law) of the Trademark Law (Law No. 127 of 1959).

(3) For devices which are amongst those disclosed in the specification or drawings originally attached to the request of a utility model application containing a priority claim under subsection (1) and which are the devices [excluding those devices disclosed in the documents (limited to those equivalent to the specification and drawings) submitted at the time of the filing of an application whose priority is claimed for an earlier application in the case where that earlier application contains a priority claim under Subsection (1) of this Section or Section 41(1) or under 43(1) or 43bis(1) or (2) of the Patent Law (including its application under Section 11(1) of this Law)] disclosed in the specification or drawings originally attached to the request of the earlier application whose priority is so claimed (in the case where that earlier application is the foreign language file application under Section 36bis(2) of the Patent Law, the foreign language file referred to in Section 36bis(1)), the Gazette containing the Utility Model or the laying open for public inspection in respect of the earlier application shall be considered to have been published or effected at the time when the Gazette containing the Utility Model in respect of the utility model application was published, for the purposes of the principal sentence of Section 3bis of this Law or the principal sentence of Section 29bis of the Patent Law.

(4) A person desiring to declare a priority claim under Subsection (1) shall, simultaneously with the utility model application, submit to the Commissioner of the Patent

JP039EN Models, Law (Consolidation), page 9/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN Office a document setting forth a statement to that effect and an identification of the earlier application.

Withdrawal of Earlier Application, etc.

9.—(1) The earlier application whose priority is claimed under Section 8(1) shall be deemed withdrawn at the expiration of one year and three months from the filing date of that earlier application. However, where that earlier application has been abandoned, withdrawn or dismissed, where the examiner’s decision or trial decision on that earlier application has become final and conclusive, where the registration of establishment referred to in Section 14(2) with respect to the earlier application has been effected, or where all of the priority claims based on that earlier application have been withdrawn, this provision shall not apply.

(2) The applicant of a utility model application containing a priority claim under Section 8(1) shall not withdraw the priority claim after the expiration of one year and three months from the filing date of the earlier application.

(3) Where the patent application containing a priority claim under Section 8(1) is withdrawn within one year and three months from the filing date of the earlier applications, the priority claim shall be deemed withdrawn simultaneously.

Conversion of Applications

10.—(1) An applicant for a patent may convert his application into a utility model application. However, this provision shall not apply after 30 days from the transmittal of the examiner’s first decision that the patent application is to be refused or after five years and six months from the filing date of the patent application.

(2) An applicant for a design registration may convert his application into a utility model application. However, this provision shall not apply after 30 days from transmittal of the exam iner’s first decision that the design application is to be refused or after five years and six months from the filing date of the design application.

(3) Where an application has been converted under the two preceding subsections, the utility model application shall be deemed to have been filed at the time of filing of the patent or design application. However, this provision shall not apply where the utility model application is either another application for a utility model registration as referred to in Section 3bis of this Law or an application for a utility model registration as referred to in Section 29bis of the Patent Law, for the purposes of those sections and Section 8(4) of this Law as well as Sections 30(4) and 43(1) of the Patent Law as applied under Section 11(1) of this Law (including its application under Section 43bis(3) of the Patent Law as applied under Section 11(1) of this Law).

(4) For the purpose of Section 43(2) of the Patent Law (including its application under Section 43bis(3) of the same law as applied in Subsection (1) of the following section of this Law) where a utility model application is converted under the provision of Subsection (1) or (2), “within one year and four months from the earliest of the filing dates” in Section 43(2)

JP039EN Models, Law (Consolidation), page 10/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN shall read “within the one year and four months from the earliest of the following filing dates or within three months from the filing date of the new patent application converted from the application under the provision of Section 10(1) or (2), whichever comes later”.

(5) Where an application has been converted under Subsection (1) or (2), the patent or design application shall be deemed to have been withdrawn.

(6) The 30-day period prescribed in the proviso to Subsection (1) shall, when the time limit prescribed in Section 121(1) of the Patent Law has been extended in accordance with Section 4 of that Law, be deemed to have been extended only for that period as extended.

(7) The 30-day period prescribed in the proviso to Subsection (2) shall, when the time limit prescribed in Section 46(1) of the Design Law has been extended in accordance with Section 4 of the Patent Law as applied under Section 68(1) of the Design Law, be deemed to have been extended only for that period as extended.

(8) Where the conversion of an application under Subsection (1) is made, any statements or documents which have been submitted with respect to the original application for patent and which shall be submitted with respect to the new application for utility model registration in accordance with Section 8(4) of this Law or Sections 30(4) or 43(1) and (2) of the Patent Law as applied under Section 11(1) of this Law (including its application under Section 43bis(3) of the Patent Law as applied under Section 11(1) of this Law), shall be deemed to have been submitted to the Commissioner of the Patent Office simultaneously with the said new utility model application.

(9) The preceding subsection shall apply mutatis mutandis to the conversion of an application under Subsection (2).

Application mutatis mutandis of Patent Law

11.—(1) Section 30 (exceptions to lack of novelty of invention), Section 38 (joint applications), Sections 43 to 44 (priority claim under the Paris Convention and division of patent applications) of the Patent Law shall apply mutatis mutandis to utility model applications.

(2) Sections 33 and 34(1) and (2), and (4) to (7) (right to obtain patent) of the Patent Law shall apply mutatis mutandis to the right to obtain a utility model registration.

(3) Section 35 (employees’ inventions) of the Patent Law shall apply mutatis mutandis to devices made by an employee, an executive officer of a legal entity or a national or local public official.

CHAPTER III TECHNICAL OPINION AS TO REGISTRABILITY OF UTILITY MODEL

Request for Technical Opinion as to Registrability of Utility Model

JP039EN Models, Law (Consolidation), page 11/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN 12.—(1) Any person may make, to the Commissioner of the Patent Office, a request for

a technical opinion as to registrability of a claimed device in a registered utility model or utility model application (hereinafter referred to as “a technical opinion as to registrability of a utility model”) provided for in Section 3(1)(iii) and (2) (only on the basis of a device or devices referred to in Sections 3(1)(iii), 3bis and 7(1) to (3) and (7)). In such a case, if there are two or more claims, a request may be made for each claim.

(2) Where a request is made, the Commissioner of the Patent Office shall have an examiner establish a report of a technical opinion as to registrability of the utility model (hereinafter referred to as “Jitsuyoshinan Gijutsu Hyokasho”) with respect to such a request.

(3) A request under Subsection (1) may be made even after the extinguishment of the utility model right. However, this provision shall not apply after the registration has been invalidated in a trial under Section 37(1).

(4) Section 47(2) of the Patent Law shall apply mutatis mutandis to the establishment of a report of a technical opinion as to registrability of a utility model.

(5) A request under Subsection (1) may not be withdrawn.

13. The Commissioner of the Patent Office shall, where a request for a technical opinion as to registrability of a utility model has been made before the publication of the Gazette containing the Utility Model, publish such fact in said Gazette at the time said Gazette is published or as soon as possible thereafter and where a request for a technical opinion as to registrability of a utility model has been made after the publication of said Gazette, he shall publish such fact in said Gazette without delay.

CHAPTER IV THE UTILITY MODEL RIGHT

1. The Utility Model Right

Registration of Establishment of Utility Model Right

14.—(1) A utility model right shall come into force upon registration of its establishment.

(2) The establishment of a utility model right shall be registered when the application for a utility model registration has been filed, unless the application has been abandoned, withdrawn or dismissed.

(3) Upon registration under the preceding subsection, the following items shall be published in the Utility Model Gazette:

(i) the name and the domicile or residence of the owner of the utility model right;

(ii) the number and the date of the application;

JP039EN Models, Law (Consolidation), page 12/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (iii) the name and the domicile or residence of the creator;

(iv) the title of the device, the brief explanation of the drawings and the claim contained in the specification as well as the contents of the drawings attached to the request;

(v) the matters appearing in the abstract attached to the request;

(vi) the number and the date of the registration;

(vii) other necessary particulars.

(4) Section 64(3) of the Patent Law shall apply mutatis mutandis to the publication of the matters appearing in the abstract under Subsection (3)(v) in the Utility Model Gazette in accordance with Subsection (3).

Correction of Specification or Drawings

14bis.—(1) The owner of a utility model right may correct the specification or drawings attached to a request only where such correction has as its object the cancellation of a claim or claims. However, where a trial under Section 37(1) of this Law is pending before the Office, he may not correct the specification or drawings attached to the request after the notification under Section 156(1) of the Patent Law as applied under Section 41 of this Law (in the case of trial examination reopened under Section 156(2), after the further notification under Section 156(1)).

(2) The correction under the preceding subsection may be made even after the extinguishment of the utility model right. However, this provision shall not apply after the registration has been invalidated in a trial under Section 37(1).

(3) Where the correction under Subsection (1) has been made, the utility model application and the registration of the utility model right shall be deemed to have been made on the basis of the corrected specification or drawings.

(4) Where the correction under Subsection (1) has been made, it shall be published in the Utility Model Gazette.

(5) Sections 127 and 132(3) of the Patent Law shall apply mutatis mutandis to the case under Subsection (1).

Term of Utility Model Right

15. The term of the utility model right shall be six years from the filing date of the utility model application.

Effects of Utility Model Right

16. The owner of a utility model right shall have an exclusive right to commercially work the registered utility model. However, where the utility model right is the subject of an

JP039EN Models, Law (Consolidation), page 13/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN exclusive license, this provision shall not apply to the extent that the exclusive licensee exclusively possesses the right to work the registered utility model.

Relationship with Another’s Registered Utility Model, etc.

17. When a registered utility model would utilize another person’s registered utility model, patented invention or registered design or design similar thereto under an application filed prior to the filing date of the utility model application concerned, or when the utility model right conflicts with another person’s design right or trademark right under an application for registration of a design or a trademark filed prior to the filing date of the utility model application concerned, the owner of the utility model right, exclusive licensee or non- exclusive licensee shall not commercially work the registered utility model.

Exclusive Licenses

18.—(1) The owner of a utility model right may grant an exclusive license on such right.

(2) An exclusive licensee shall have an exclusive right to commercially work the registered utility model, to the extent laid down in the license contract.

(3) Section 77(3) to (5) (transfer, etc.), Section 97(2) (surrender) and Section 98(1)(ii) and (2) (effects of registration) of the Patent Law shall apply mutatis mutandis to exclusive licenses.

Non-Exclusive Licenses

19.—(1) The owner of a utility model right may grant a non-exclusive license on such right.

(2) A non-exclusive licensee shall have the right to commercially work the registered utility model, to the extent prescribed in this Law or laid down in the license contract.

(3) Section 73(1) (joint ownership), Section 97(3) (surrender) and Section 99 (effects of registration) of the Patent Law shall apply mutatis mutandis to non-exclusive licenses.

Non-Exclusive License due to Working Prior to Registration of Demand for Invalidation Trial

20.—(1) When a person coming within any of the paragraphs set out below has been commercially working a device or invention in Japan or has been making preparations therefor, prior to the registration of a demand for a trial under Section 123(1) of the Patent Law, without knowing that the patent falls under any of the requirements of any of the paragraphs of Section 123(1) of the Patent Law, such person shall have a non-exclusive license on the utility model right or on the exclusive license existing at the time when the patent was invalidated, such non-exclusive license being limited to the invention which is being worked or for which preparations for working are being made and to the purpose of such working or the preparations therefor:

JP039EN Models, Law (Consolidation), page 14/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (i) the original patentee, where a device registered as a utility model and a patented

invention are the same and the patent has been invalidated;

(ii) the original patentee, where his patent has been invalidated and a utility model registration for the same device as the invention has been granted to the person entitled;

(iii) in the cases referred to in the two preceding paragraphs, a person, who, at the time of reg istration of the demand for a trial under Section 123(1) of the Patent Law, has either the exclusive license or an exclusive license on the patent that has been invalidated or a non- exclusive license that is effective under Section 99(1) of the Patent Law against the patent right or the exclusive license.

(2) The owner of the utility model right or the exclusive licensee shall have a right to a reasonable remuneration as consideration for the non-exclusive license under the preceding subsection.

Arbitration Decision on Grant of Non-Exclusive License in Case of Non-Working

21.—(1) Where a registered utility model has not been sufficiently and continuously worked during a period of three years or more in Japan, a person who intends to work the registered utility model may request the owner of the utility model right or the exclusive licensee to hold consultations on the grant of a non-exclusive license thereon. However, this provision shall not apply unless four years have elapsed since the filing date of the application corresponding to the registered util ity model.

(2) If no agreement is reached or no consultation is possible under the preceding subsection, a person who intends to work the registered utility model may request the Commissioner of the Patent Office for an arbitration decision.

(3) Sections 84 to 91bis (arbitration procedure, etc.) of the Patent Law shall apply mutatis mutandis to arbitrations under the preceding subsection.

Arbitration Decision on Grant of Non-Exclusive License on One’s Own Registered Utility Model

22.—(1) Where a registered utility model falls under any of the cases provided for in Section 17, the owner of the utility model right or the exclusive license may request the other person referred to in that section to hold consultations on the grant of a non-exclusive license to work the registered utility model or of a non-exclusive license on the patent right or the design right.

(2) The other person referred to in Section 17 who has been requested to hold the consultations under the preceding subsection may request the owner of the utility model right or the exclusive licensee having requested the consultations to hold consultations on the grant of a non-exclusive license within the scope of the registered utility model which the owner of the utility model right or the exclusive licensee desires to work by obtaining the non-exclusive

JP039EN Models, Law (Consolidation), page 15/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN license on the utility model right, the patent right or the design right through the consultations requested by the owner of the utility model right or the exclusive licensee.

(3) If no agreement is reached or no consultation is possible under Subsection (1), the owner of the utility model right or the exclusive licensee may request the Commissioner of the Patent Office for an arbitration decision.

(4) If no agreement is reached or no consultation is possible under Subsection (2) and an arbitration under the preceding subsection is requested, the other person referred to in Section 17 may request the Commissioner of the Patent Office for an arbitration decision only within the time limit which the Commissioner of the Patent Office designates as the time limit for the other person to submit a written reply in accordance with Section 84 of the Patent Law as applied under Subsection (7).

(5) If, in the case of Subsection (3) or the preceding subsection, the grant of a non- exclusive license would unduly injure the interests of the other person referred to in Section 17 or the owner of the utility model right or the exclusive licensee, the Commissioner of the Patent Office shall not render an arbitration decision ordering a non-exclusive license to be granted.

(6) In the case of Subsection (4) in addition to the case provided for in the preceding subsection, the Commissioner of the Patent Office shall not render an arbitration decision ordering a non-exclusive license to be granted if an arbitration decision ordering a non- exclusive license to be granted is not rendered with respect to the request for the arbitration decision under Subsection (3).

(7) Sections 84, 85(1) and 86 to 91bis (arbitration procedure, etc.) of the Patent Law shall apply mutatis mutandis to arbitrations under Subsection (3) or (4).

Arbitration Decision on Grant of Non-Exclusive License in Public Interest

23.—(1) Where the working of a registered utility model is particularly necessary in the public interest, a person who intends to work the utility model may request the owner of the utility model right or the exclusive licensee to hold consultations on the grant of a non- exclusive license.

(2) If no agreement is reached or no consultation is possible under the preceding subsection, a person who intends to work the registered utility model may request the Minister of Economy, Trade and Industry for an arbitration decision.

(3) Sections 84, 85(1) and 86 to 91bis (arbitration procedure, etc.) of the Patent Law shall apply mutatis mutandis to arbitrations under the preceding subsection.

Transfer, etc. of Non-Exclusive License

24.—(1) A non-exclusive license, with the exception of one which results from an arbitration decision under Section 21(2), 22(3) or (4), or 23(2) of this Law, Section 92(3) of the Patent Law or Section 33(3) of the Design Law, may be transferred, but only together with

JP039EN Models, Law (Consolidation), page 16/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN the business in which it is worked or only with the consent of the owner of the utility model right (or the owner and the exclusive licensee in the case of a non-exclusive license on an exclusive license) or in the case of inheritance or other general succession.

(2) A non-exclusive licensee may, except in the case of a non-exclusive license resulting from an arbitration decision under Section 21(2), 22(3) or (4), or 23(2) of this Law, Section 92(3) of the Patent Law or Section 33(3) of the Design Law, establish a pledge on the non-exclusive license, but only with the consent of the owner of the utility model right (or the owner and the exclusive licensee in the case of a non-exclusive license on an exclusive license).

(3) A non-exclusive license resulting from an arbitration decision under Section 21(2) or 23(2) may be transferred only together with the business in which it is worked.

(4) A non-exclusive license resulting from an arbitration decision under Section 22(3) of this Law, Section 92(3) of the Patent Law or Section 33(3) of the Design Law shall be transferred together with the utility model, patent or design right to which the non-exclusive licensee is entitled, and if such right has been transferred independently from the business in which it is worked or extinguished, the non-exclusive licensee shall be extinguished simultaneously.

(5) A non-exclusive license resulting from an arbitration decision under Section 22(4) of this Law shall be transferred together with the utility model, patent or design right to which the non-exclusive licensee is entitled and shall be extinguished at the same time as the utility model, patent or design right has been extinguished.

Pledges

25.—(1) Where a utility model right or an exclusive or non-exclusive license is the subject of a pledge, the pledgee may not work the registered utility model except as otherwise provided by contract.

(2) Section 96 (attachment) of the Patent Law shall apply mutatis mutandis to pledges on a util ity model right, exclusive license or non-exclusive license.

(3) Section 98(1)(iii) and (2) (effects of registration) of the Patent Law shall apply mutatis mutandis to pledges on a utility model right or exclusive license.

(4) Section 99(3) (effects of registration) of the Patent Law shall apply mutatis mutandis to pledges on a non-exclusive license.

Application mutatis mutandis of Patent Law

26. Sections 69(1) and (2), 70 to 71bis (limits of patent right, and technical scope of patented inventions), Section 73 (joint ownership), Section 76 (extinguishment of patent right in absence of heir), Section 79 (non-exclusive license by virtue of prior use), Sections 81 and 82 (non-exclusive license after expiration of design right), Section 97(1)(surrender) and

JP039EN Models, Law (Consolidation), page 17/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN Section 98(1)(i) and (2) (effects of registration) of the Patent Law shall apply mutatis mutandis to utility model rights.

2. Infringement

Injunctions

27.—(1) The owner of a utility model right or exclusive licensee may require a person who is infringing or is likely to infringe the utility model right or exclusive license (hereinafter referred to as “an infringer, etc.”) to discontinue or refrain from such infringement.

(2) The owner of a utility model right or an exclusive licensee who is acting under the preceding subsection may demand the destruction of the articles by which the act of infringement was committed, the removal of the facilities used for the act of infringement, or other measures necessary to prevent the infringement.

Acts Deemed to be Infringement

28. Acts of manufacturing, assigning, leasing, importing or offering for assignment or lease of, in the course of trade, article to be used exclusively for the manufacture of the article covered by the registered utility model shall be deemed to be an infringement of the utility model right or exclusive license.

Presumption, etc. of Amount of Damage

29.—(1) Where the owner of a utility model right or exclusive licensee claims, from a person who has intentionally or negligently infringed his utility model right or exclusive license, compensation for damage caused to him by the infringement, and the person’s act is the assignment of articles by which the act of the infringement was committed, the sum of money with the unit price of such article multiplied by the number of articles (hereinafter referred to in this paragraph as the “number of assigned articles”) which the owner of a utility model right or exclusive licensee could have sold in the absence of the infringement may be estimated as the amount of damage suffered by the owner of a utility model right or exclusive licensee within a limit not exceeding an amount attainable depending on working capability of the owner of a utility model right or exclusive licensee. Where there is any circumstance that prevents the owner of a utility model right or exclusive licensee from selling part or the whole of the number of assigned articles, a sum equivalent to the number of assigned articles subject to that circumstance shall be deducted.

(2) Where the owner of a utility model right or exclusive licensee claims, from a person who has intentionally or negligently infringed the utility model right or exclusive license, compensation for damage caused to him by the infringement, the profits gained by the infringer through the infringement shall be presumed to be the amount of damage suffered by the owner or exclu sive licensee.

JP039EN Models, Law (Consolidation), page 18/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (3) The owner of a utility model right or exclusive licensee may claim, from a person

who has intentionally or negligently infringed the utility model right or exclusive license, an amount of money which he would be entitled to receive for the working of the registered utility model, as the amount of damage suffered by him.

(4) The preceding subsection shall not preclude a claim to damages exceeding the amount referred to therein. In such a case, where there has been neither willfulness nor gross negligence on the part of the person who has infringed the utility model right or the exclusive license, the court may take this into consideration when awarding damages.

Warning in the Form of Report of Technical Opinion as to Registrability of Utility Model

29bis. The owner of a utility model right or the exclusive licensee may not exercise his rights pertaining to his utility model rights or exclusive rights against an infringer, etc., until he has given a warning in the form of a report of a technical opinion as to registrability of the utility model (Jitsuyoshinan Gijutsu Hyokasho).

Responsibility of Owner of Utility Model Right, etc.

29ter.—(1) Where the owner of a utility model right or the exclusive licensee has exercised his utility model right or exclusive license or given a warning to an infringer, etc. and a trial decision (other than a trial decision on the grounds set out in Section 37(1)(vi)) that the utility model registration is to be invalidated has become final and conclusive, such owner or exclusive licensee shall be liable to indemnify any other party in respect of any damage caused to that party by the exercise of that right or by the giving of the warning. However, this provision shall not apply where such exercise or warning was based on a technical opinion of the report of a technical opinion as to registrability of the Utility Model (Jitsuyoshinan Gijutsu Hyokasho) (other than a technical opinion that the device claimed in the utility model application or the registered utility model is not registrable in accordance with Section 3(1)(iii) and (2) (only with respect to the device in Sections 3(1)(iii)), 3bis and 7(1) to (3) and (7)) as to registrability of the utility model, and the owner or exclusive licensee has taken appropriate care in exercising the right or giving the warning.

(2) The preceding subsection shall apply where the right is exercised or the warning is given with respect to a device which, as a result of a correction under Section 14bis(1) to the specification or drawings attached to the request of the utility model application, no longer falls within the scope of the claim(s) as at the time of the registration of the utility model right.

Application mutatis mutandis of Patent Law

30. Sections 104bis to 106 (obligation to clarify relevant act in concrete manner, production of documents etc., expert opinion for proof of damage, award of reasonable damages, and measures for recovery of reputation) of the Patent Law shall apply mutatis mutandis to the infringement of a utility model right or exclusive license.

JP039EN Models, Law (Consolidation), page 19/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN 3. Annual Fees

Annual Fees

31.—(1) A person who obtains registration of a utility model right or the owner of a utility model right shall pay, as annual fees, the amount specified in the right-hand column of the following table corresponding to the relevant period in the left-hand column, for each case and for each year up to the expiration of the term under Section 15 from the registration of a utility model right:

Division of year Amounts

First to third year Annually, ¥7,600 plus ¥700 per claim

Fourth to sixth year Annually, ¥15,100 plus ¥1,400 per claim

(2) The preceding subsection shall not apply to utility model rights belonging to the State or independent administrative institutions (referring to the independent administrative institutions prescribed in Section 2(1) of the Law concerning the General Provisions of Independent Administrative Institutions (Law No. 103 of 1999), hereinafter the same) which are those to be set up by Cabinet Order by taking into consideration the substance of their business and other circumstances.

(3) The provision of Subsection (1) shall not apply to a utility model right owned jointly by the State and the independent administrative institutions prescribed by Cabinet Order in the preceding subsection or owned jointly by the independent administrative institutions prescribed by Cabinet Order in the same subsection.

(4) Where the State and the like (referring to the State or the independent administrative institutions prescribed by Cabinet Order in Subsection (2), the same in Section 54(3) and (5)) and the person other than the State and the like (referring to the person other than the State and the independent administrative institutions prescribed by Cabinet Order in Subsection (2), hereinafter the same in this subsection and the same section (6)) jointly own a utility model right and there is an agreement with respect to their shares of the right, the annual fees under Subsection (1) shall be a sum with the prescribed annual fees under Subsection (1) multiplied by the ratios of the shares of the persons other than the State and the like,and the person s other than the State and the like shall pay such sum, notwithstanding the provision of Subsection (1).

(5) Where the amount of the annual fees calculated in accordance with the provision of the preceding subsection has a fractional figure less than 10 yen, that fractional figure shall be discarded.

JP039EN Models, Law (Consolidation), page 20/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (6) The payment of the annual fees under Subsection (1) shall be made by patent

revenue stamps as prescribed by an ordinance of the Ministry of Economy, Trade and Industry. However, wherever so prescribed by an ordinance of the Ministry of Economy, Trade and Industry, such payment may be made in cash.

Time Limit for Payment of Annual Fees

32.—(1) The annual fees for each year from the first to the third year under Section 31(1) shall be paid in a lump sum, simultaneously with the utility model application (in the case of the conversion of an application under Section 10(1) or (2) or the division of an application under Section 44(1) of the Patent Law as applied under Section 11(1) of this Law, simultaneously with that conversion or division).

(2) The annual fees for the fourth and subsequent years under Section 31(1) shall be paid during the preceding year or prior thereto.

(3) Upon the request of the person liable to pay an annual fee, the Commissioner of the Patent Office may extend the period prescribed in Subsection (1) by a period not exceeding 30 days.

Reduction or Deferment of Payment of Annual Fees or Exemption Therefrom

32bis. Where the Commissioner of the Patent Office recognizes that a person liable to pay the annual fees for each year from the first to the third year under Section 31(1) is the creator of the device claimed in the utility model application or the creator’s heir and that he cannot afford to pay the annual fees because of poverty, he may reduce the annual fees, exempt him therefrom or grant him deferment of payment thereof as prescribed by Cabinet Order.

Late Payment of Annual Fees

33.—(1) Where the owner of a utility model right is unable to pay an annual fee within the time limit prescribed in Section 32(2) or within the time limit for deferred payment under Section 32bis, he may pay the annual fee belatedly within six months from the expiration of the time limit.

(2) In the case of late payment of an annual fee in accordance with the preceding subsection, the owner of the utility model right shall, in addition to the annual fee provided for in Section 31(1), pay a surcharge of the same amount as the annual fee.

(3) The payment of the surcharge under the preceding subsection shall be made by patent revenue stamps as prescribed by an ordinance of the Ministry of Economy, Trade and Industry. However, wherever so prescribed by an ordinance of the Ministry of Economy, Trade and Industry, such payment may be made in cash.

(4) Where the owner of a utility model right fails to pay an annual fee for the fourth year or a subsequent year under Section 31(1) as well as the surcharge under Subsection (2)

JP039EN Models, Law (Consolidation), page 21/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN within the time limit for late payment under Subsection (1), the utility model right shall be deemed to have been extinguished retroactively from the moment that the time limit prescribed in Section 32(2) expired.

(5) Where the owner of a utility model right fails to pay an annual fee whose payment has been deferred under Section 32bis and the surcharge under Subsection (2) within the time limit for late payment under Subsection (1), the utility model right shall be deemed never to have existed.

Restoration of Utility Model Right by Late Payment of Annual Fees

33bis.—(1) Where the utility model right is one which was deemed to have been extinguished under Section 33(4) or which was deemed never to have existed under Section 33(5) and the owner of the extinguished utility model right is unable to pay an annual fee and surcharge belatedly within the time limit for late payment under Section 33(1) due to reasons outside his control, he may pay the annual fee and surcharge referred to in Section 33(4) or (5) within 14 days (where he is a resident abroad, within two months) from the date on which the reasons ceased to be applicable but not later than six months following the expiration of said time limit.

(2) Where the annual fee and surcharge have been paid in accordance with the preceding subsection, the utility model right shall be deemed to have been maintained retroactively from the time of the expiration of the time limit prescribed in Section 32(2) or existed from the beginning.

Restriction on Effects of Utility Model Right Restored

33ter.—(1) Where a utility model right has been restored under Section 33bis(2), the effects of the utility model right shall not extend to the article covered by a registered utility model which was imported into, or manufactured or acquired in Japan after the expiration of the time limit for late payment under Section 33(1) but before the registration of the restoration of the utility model right.

(2) The effects of a utility model right restored under Section 33bis(2) shall not extend, after the expiration of the time limit for late payment under Section 33(1) but before the registration of restoration of the utility model right, to the following acts:

(i) the working of the device;

(ii) acts of manufacturing, assigning, leasing, importing or offering for assignment or lease of, articles to be used exclusively for the manufacture of the product covered by the registered utility model.

Refund of Annual Fees

34.—(1) Annual fees shall be refunded, upon the request of the person who paid them, only in the following cases:

JP039EN Models, Law (Consolidation), page 22/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (i) the annual fees paid by mistake or in excess;

(ii) the annual fees in the case where the disposition that the utility model application is to be dismissed became final and conclusive;

(iii) the annual fees for the year following the year in which the trial decision that the utility model registration is to be invalidated became final and conclusive, and subsequent years;

(iv) the annual fees for the year following the year in which the date of expiration of the term of utility model right falls, and subsequent years.

(2) No refund of annual fees under the preceding subsection may be requested after one year from the date of payment in the case of annual fees under Paragraph (i), or after six months from the date on which the disposition or the trial decision became final and conclusive in the case of annual fees under Paragraph (ii) or (iii) or after one year from the date of the registration of establishment of a utility model right in the case of the annual fees under Paragraph (iv) of the preceding subsection.

35. [Deleted]

Application mutatis mutandis of Patent Law

36. Section 110 (payment of annual fees by an interested person) of the Patent Law shall apply mutatis mutandis to the annual fee under this Law.

CHAPTER V TRIAL

Trial for Invalidation of Utility Model Registration

37.—(1) In the following cases, a trial may be demanded for the invalidation of a utility model registration. In this context, if there are two or more claims, a trial may be demanded for each claim. The cases referred to are:

(i) where the registration has been effected in respect of a utility model application with the amendment which does not comply with Section 2bis(2);

(ii) where the registration has been effected contrary to Section 25 of the Patent Law as applied under Section 2quinquies(3) of this Law, to Section 3, 3bis, 4 or 7(1) to (3) or (7) or to Section 38 of the Patent Law as applied under Section 11(1) of this Law;

(iii) where the registration has been effected contrary to the provisions of a treaty;

(iv) where the registration has been effected in respect of a utility model application which does not comply with the requirements of Section 5(4) or (6) [excluding (iv)];

JP039EN Models, Law (Consolidation), page 23/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (v) where the registration has been effected in respect of a utility model application

filed by a person who is not the creator and has not succeeded to the right to obtain a utility model registration for the device concerned;

(vi) where, after the registration, the owner of the utility model right has become a person who can no longer enjoy such right under Section 25 of the Patent Law as applied under Section 2quinquies(3) of this Law or the registration no longer complies with a treaty.

(2) Even after the extinguishment of a utility model right, a trial under the preceding subsection may be demanded.

(3) Where a trial under Subsection (1) has been demanded, the trial examiner-in-chief shall notify the exclusive licensee with respect to the utility model right and other persons who have any registered rights relating to the utility model registration.

Formal Requirements of Demands for Trial

38.—(1) A person demanding a trial shall submit a written demand to the Commissioner of the Patent Office stating the following:

(i) the name and the domicile or residence of the demandant and his representative;

(ii) an identification of the trial case;

(iii) the relief sought in the demand and the grounds therefor.

(2) An amendment of the written demand submitted under the preceding subsection shall not change the gist thereof.

Submission of Written Reply, etc.

39.—(1) When a trial has been demanded, the trial examiner-in-chief shall transmit a copy of the written demand to the defendant and shall give him an opportunity to submit a written reply, designating an adequate time limit.

(2) Upon receipt thereof or where, during the pendency of the trial under Section 37(1), a correction under Section 14bis(1) has been made, the trial examiner-in-chief shall transmit a copy of the written reply or the correction to the demandant.

(3) The trial examiner-in-chief may examine the parties and intervenors with respect to the trial.

Relationship with Litigation

40.—(1) The trial proceedings may, if it is deemed necessary in the trial, be suspended until the trial decision in another trial has become final and conclusive or until litigation proceedings have been concluded.

JP039EN Models, Law (Consolidation), page 24/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (2) Where a suit or an application for provisional attachment or provisional disposal

has been filed, if the court deems it necessary, it may suspend the litigation proceedings until the trial decision becomes final and conclusive.

(3) Where a suit with respect to infringement of a utility model right or an exclusive license has been filed, the court shall notify the Commissioner of the Patent Office thereof. The same shall apply where the litigation proceedings have been concluded.

(4) Where the Commissioner of the Patent Office receives the notification under the preceding subsection, he shall notify the court of a demand or nondemand for the trial with respect to the utility model right. The same shall apply where the written demand for a trial is ruled to be dismissed, the trial decision is rendered or the demand for the trial is withdrawn.

40bis.—(1) Subject to Section 40(2), where a suit or an application for provisional attachment or provisional disposal has been filed with respect to the infringement of the utility model right, and when a motion for the suspension of the litigation proceedings by the defendant or debtor is made for the reason that a trial for invalidation under Section 37(1) has been demanded, the court shall suspend such proceedings until after a trial decision has been given in respect of the trial for invalidation under Section 37(1), unless it is obviously deemed that such suspension is not necessary.

(2) No appeal shall lie from a ruling with respect to a motion under the preceding subsection.

(3) When the reason for the suspension is no longer applicable, or circumstances have otherwise changed, the court may revoke the ruling of suspension under Subsection (1).

Application mutatis mutandis of Patent Law

41. Sections 125, 132 to 133bis, 135 to 157, 167, 169(1), (2), (5) and (6) and 170 of the Patent Law shall apply mutatis mutandis to trials under this Law.

CHAPTER VI RETRIAL AND LITIGATION

Demand for Retrial

42.—(1) Against a final and conclusive trial decision. The party concerned or an intervenor may demand a retrial.

(2) Sections 338(1) and (2) and 339 (grounds for retrial) of the Code of Civil Procedure (Law No. 109 of 1996) shall apply mutatis mutandis to demands for a retrial under the preceding subsection.

43.—(1) Where the demandant and the defendant in a trial have in collusion caused a trial decision to be rendered, with the purpose of injuring the rights or interests of a third person, such person may demand a retrial against the final and conclusive trial decision.

JP039EN Models, Law (Consolidation), page 25/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (2) In such a retrial, the demandant and the defendant shall be made joint defendants.

Restriction on Effects of Utility Model Right Restored by Retrial

44.—(1) Where the utility model right relating to an invalidated utility model registration has been restored through a retrial, the effects of the utility model right shall not extend to the article covered by the registered utility model which was imported into Japan, or manufactured or acquired there, in good faith after the time when the trial decision became final and conclusive but before the trial demand for a retrial was registered.

(2) Where a utility model right relating to an invalidated utility model registration has been restored through a retrial, the effects of the utility model right shall not extend, after the trial decision became final and conclusive but before, the trial demand for a retrial was registered to the following acts:

(i) the working of the device in good faith;

(ii) act of manufacturing, assigning, leasing or importing or offering for assignment of lease of, in good faith, articles to be used exclusively for the manufacture of the article covered by the registered utility model.

Application mutatis mutandis of Patent Law

45.—(1) Section 173 (time limit for demand for retrial), Section 174(3) and (5) (application of provisions on trial, etc.) and Section 176 (non-exclusive license due to working before registration of demand for retrial) of the Patent Law shall apply mutatis mutandis to retrials under this Law. In such a case, “Section 131” in Section 174(3) of the Patent Law shall read “Sections 38 and 39 of the Utility Model Law” and “Section 168” of the Patent Law shall read “Sections 40 and 40bis of the Utility Model Law”.

(2) Section 4 of the Patent Law shall apply mutatis mutandis to the time limits prescribed in Section 173(1) of the Patent Law as applied under Subsection (1).

46. [Deleted]

Actions Against Trial Decisions, etc.

47.—(1) An action against a trial decision and an action against a ruling of dismissal of a demand for a trial or retrial shall come under the exclusive jurisdiction of the Tokyo High Court.

(2) Section 178(2) to (6) (time limit for institution of action, etc.) and Sections 179 to 182 (defendant in the action, notification of institution of action, annulment of the trial decision or ruling, and sending of certified copy of the judgment) of the Patent Law shall apply mutatis mutandis to actions under the preceding subsection.

Action on Amount of Remuneration

JP039EN Models, Law (Consolidation), page 26/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN 48.—(1) Where a person who is concerned in an arbitration decision under Section

21(2), 22(3) or (4) or 23(2) is dissatisfied with the amount of remuneration fixed in the decision, he may institute an action for the increase or decrease of the remuneration.

(2) Section 183(2) (time limit for institution of action) and Section 184 (defendant in the action) of the Patent Law shall apply mutatis mutandis to actions under the preceding subsection.

Relationship Between Administrative Appeal and Litigation

48bis. Section 184bis (relationship between administra tive appeal and litigation) of the Patent Law shall apply mutatis mutandis to actions for the annulment of measures (with the exception of measures under Section 55(5)) taken under this Law or an order or ordinance thereunder.

CHAPTER VII SPECIAL PROVISIONS CONCERNING INTERNATIONAL APPLICATIONS UNDER

THE PATENT COOPERATION TREATY

Utility Model Application Based on International Application

48ter.—(1) An international application (a utility model application only) for which the international filing date has been accorded in accordance with Article 11(1) or (2)(b) or Article 14(2) of the Patent Cooperation Treaty done at Washington on June 19, 1970 (hereinafter referred to as “Treaty” in this Chapter) and which contains the designation of Japan as a designated State referred to in Article 4(1)(ii) of the Treaty shall be considered to be a utility model application having been filed on its international filing date.

(2) Section 184ter(2) (patent application based on international application) of the Patent Law shall apply mutatis mutandis to the international application considered to be a utility model application by virtue of the provision of the preceding subsection (hereinafter referred to as “international utility model application”).

Translation of International Utility Model Application in Foreign Language

48quater.—(1) The applicant of an international utility model application made in a foreign language (hereinafter referred to as “foreign language utility model application”) shall furnish to the Commissioner of the Patent Office a translation into Japanese of the description, the claims and the drawings (limited to any text matter of the drawings) referred to in Article 3(2) of the Treaty as of the international filing date referred to in Section 48ter(1) (hereinafter referred to as “international filing date”), within one year and eight months [in the case of an international utility model application in which an international preliminary examination referred to in Article 33 of the Treaty had been demanded within one year and seven months from the priority date and, further, Japan has been elected as an elected State under Article 31(4)(a) of the Treaty—within two years and six months from the priority date

JP039EN Models, Law (Consolidation), page 27/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (hereinafter referred to as “time limit for the submission of the national form paper”)] from the priority date referred to in Article 2(xi) of the Treaty (hereinafter referred to as “priority date”).

(2) In the case of the preceding subsection, the applicant of the foreign language utility model application may, where he has made an amendment under Article 19(1) of the Treaty, furnish a translation of the amended claims in lieu of the translation of the claims referred to in that subsection.

(3) When the translation of the description referred to in Subsection (1) and the translation of the claims referred to in Subsections (1) and (2) have not been furnished within the time limit for the submission of the national form paper, the international utility model application shall be deemed withdrawn.

(4) The applicant who has furnished the translation of the claims referred to in Subsection (1) may, where he has made an amendment under Article 19(1) of the Treaty, further furnish a translation into Japanese of the amended claims only no later than the date on which the expiration of the time limit for the submission of the national form paper [or where the applicant has made a request for the national processing within the time limit for the submission of the national form paper under Articles 23(2) and 40(2) of the Treaty (hereinafter referred to as “request for national processing”), the date on which the request for the national processing was made—hereinafter referred to as “relevant time for the national processing” occurs].

(5) The principal sentence of Section 184septies(3) of the Patent Law shall apply mutatis mutandis where the translation referred to in Subsection (2) or (4) has not been furnished.

Submission of Paper and Invitation to Correction, etc.

48quinquies.—(1) The applicant of an international utility model application shall, within the time limit for the submission of the national form paper, submit to the Commissioner of the Patent Office a paper stating the following:

(i) the name and the domicile or residence of the applicant;

(ii) the name and the domicile or residence of the creator;

(iii) the international application number and other matters provided for in an ordinance of the Ministry of Economy, Trade and Industry.

(2) The Commissioner of the Patent Office may invite correction, designating an adequate time limit, in the following cases:

(i) when the paper to be submitted under the preceding subsection has not been filed within the time limit for the submission of the national form paper or at the time prescribed in the said subsection;

JP039EN Models, Law (Consolidation), page 28/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (ii) when any proceeding under the preceding subsection does not comply with Section

7(1) to (3) and Section 9 of the Patent Law as applied under Section 2quinquies(2) of this Law;

(iii) when any proceeding under the preceding subsection does not comply with the formality requirements provided for in an ordinance of the Ministry of Economy, Trade and Industry;

(iv) when the translation of the abstract to be submitted under Section 48quater(1) has not been filed within the time limit for the submission of the national form paper;

(v) When the annual fee to be paid under Section 32(1) has not been paid within the time limit for the submission of the national form paper;

(vi) when the fee to be paid under Section 54(2) has not been paid within the time limit for the submission of the national form paper.

(3) Section 184quinquies(3) of the Patent Law applies mutatis mutandis to the correction to be made on an invitation under the preceding subsection.

(4) The applicant of an international utility model application may not make a request for the national processing for his international utility model application until, in respect of an international utility model application made in the Japanese language (hereinafter referred to as a “Ja panese language utility model application”), after the proceeding under Section 48quinquies(1) has been taken, and in respect of a foreign language utility model application, after the proceedings under Section 48quater(1) and Section 48quinquies (1) have been taken and, further, after the annual fees to be paid under Section 32(1) and the fees to be paid under Section 54(2) have been paid.

Effect, etc., of Request, Description, etc., of International Application

48sexies.—(1) The request of an international utility model application as of the international filing date shall be deemed to be the request submitted under Section 5(1).

(2) The description and the claims of a Japanese language utility model application as of the international filing date and the translation of the description and the claims of a foreign language utility model application as of the international filing date shall be deemed to be the specification as submitted attached to the request under Section 5(2), the claims of a Japanese language utility model application as of the international filing date and the translation of the claims of a foreign language utility model application as of the international filing date shall be deemed to be the utility model claims set forth in the specification as submitted attached to the request under Section 5(2), and the drawings in a Japanese language utility model application as of the international filing date and the drawings (excluding any text matter of the drawings) and the translation of the text matter of the drawings in a foreign language utility model application as of the international filing date are deemed to be the drawings as submitted attached to the request under Section 5(2), and the abstract of a Japanese language utility model application and the translation of the abstract of a foreign language utility model

JP039EN Models, Law (Consolidation), page 29/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN application are deemed to be the abstract as submitted attached to the request under Section 5(2).

(3) Where the translation of the claims amended under Article 19(1) of the Treaty has been furnished under Section 48quater(2) or (4), the translation of the description as of the international filing date and the translation of the amended claims shall be deemed to be the translation of the specification as submitted attached to the request under Section 5(2), and the translation of the amended claims shall be deemed to be the utility model registration claims set forth in the specification as submitted attached to the request under Section 5(2) notwithstanding Subsection (2).

Submission of Drawings

48septies.—(1) The applicant of an international utility model application shall submit drawings to the Commissioner of the Patent Office not later than the date on which the relevant time for the national processing occurs if the international application did not include the drawings on the international filing date.

(2) The Commissioner of the Patent Office may invite the applicant of the international utility model application to submit drawings, designating an adequate time limit when the drawings referred to in the preceding subsection have not been submitted by the date on which the relevant time for the national processing occurs.

(3) The Commissioner of the Patent Office may dismiss an international utility model application when a person whom he has invited to submit drawings under the preceding subsection fails to do so within the time limit designated in accordance with the said subsection.

(4) The submission of drawings under Subsection (1) or in compliance with the invitation under Subsection (2) (or—when a brief explanation of the drawings was submitted attached to the drawings—the submission of the drawings and the brief explanation of the drawings) shall be deemed the amendment under Section 2bis(1). In this case, the proviso to the said subsection shall not apply.

Special Provisions Concerning Amendment

48octies.—(1) The proviso to Section 2bis(1) of this Law shall not apply to an amendment which is deemed to have been made under Section 2bis(1) of this Law in accordance with Sections 184septies(2) and 184octies(2) of the Patent Law as applied under Section 48quindecies(1) of the Patent Law.

(2) The proviso to Section 2bis(1) shall not apply to an amendment under Article 28(1) or 41(1) of the Treaty concerning an international utility model application.

(3) For the purposes of the scope of the amendment concerning the description or drawings of a foreign language utility model application, “the specification or drawings originally attached to the request” in Section 2bis(2) shall be replaced by “the description, the

JP039EN Models, Law (Consolidation), page 30/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN claims or the drawings of the international application as of the international filing date referred to in Section 48quater(1)”.

(4) Section 184duodecies(1) of the Patent Law shall apply to an amendment under the principal sentence of Section 2bis(1) of this Law or under Articles 28(1) or 41(1) of the Treaty concerning an international utility model application. In such a case, “Section 195(2)” and “has been paid and the relevant time for the national processing has occurred” in Section 184duodecies(1) of the Patent Law shall read “annual fees to be paid under Section 32(1) and Section 54(2) of the Utility Model Law” and “has been paid,” respectively.

Special Provisions Concerning Registrability of Utility Model

48novies. For the purposes of Section 3bis of this Law where another application for a utility model registration or for a patent referred to in Section 3bis of this Law is an international utility model application or an international patent application referred to in Section 184ter(2) of the Patent Law, the passage reading “of another application for a utility model registration or for a patent” in Section 3bis of this Law shall be replaced by “of another application for a utility model registration or for a patent (excluding a foreign language utility model application referred to in Section 48quater(1) or a foreign language patent application referred to Section 184quater(1) of the Patent Law which is deemed to have been withdrawn under Section 48quater(3) of this Law or Section 184quater(3) of the Patent Law);” the passage reading “was published or” in that section shall be replaced by “was published;” the passage reading “or the laying open for public inspection (Kôkai)” in that section shall be replaced by “or the laying open for public inspection (Kôkai) or the international publication referred to in Article 21 of the Patent Cooperation Treaty done at Washington on June 19, 1970;” and the passage reading “the specification or drawings originally attached to the request” in that section shall be replaced by “the description, the claims and the drawings of the international application as of the international filing date referred to in Section 48quater(1) of this Law or Section 184quater(1) of the Patent Law”.

Special Provisions Concerning Priority Claim Based on Utility Model Application, etc.

48decies.—(1) Section 8(4) and Section 9(2) shall not apply to an international utility model application.

(2) For the purposes of Section 8(3) for a Japanese language utility model application, “the Gazette containing the Utility Model was published” in Section 8(3) shall be considered to have been replaced by “the Gazette containing the Utility Model was published or the international publication referred to in Article 21 of the Patent Cooperation Treaty done at Washington on June 19, 1970”.

(3) For the purposes of Section 8(3) for a foreign language utility model application, “the specification or drawings originally attached to the request of a utility model application” in Section 8(3) shall be considered to have been replaced by “the description, the claims or the drawings of the international application as of the international filing date referred to in Section 48quater(1)” and “the Gazette containing the Utility Model was published” in Section

JP039EN Models, Law (Consolidation), page 31/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN 8(3) shall be considered to have been replaced by “the Gazette containing the Utility Model was published or the international publication referred to in Article 21 of the Patent Cooperation Treaty done at Washington on June 19, 1970 was effected”.

(4) For the purposes of Section 8(1) to (3) and Section 9(1) in the case where the earlier application under Section 8(1) is an international utility model application or an international patent application referred to in Section 184ter(2) of the Patent Law, “the specification or drawings originally attached to the request” in Section 8(1) and (2) shall be considered to have been replaced by “the description, the claims or the drawings of an international application as of the international filing date referred to in Section 48quater(1) of this Law or Section 184quater(1) of the Patent Law,” “the specification or drawings originally attached to the request of the earlier application” and “the laying open for public inspection” in Section 8(3) shall be considered to have been replaced by “the description, the claims or the drawings of an international application as of the international filing date referred to in Section 48quater(1) of this Law or Section 184quater(1) of the Patent Law of the earlier application” and “the international publication referred to in Article 21 of the Patent Cooperation Treaty done at Washington on June 19, 1970,” and “at the expiration of one year and three months from the filing date of the application” in Section 9(1) shall be considered to have been replaced by “at the expiration of the relevant time for the national processing under Section 48quater(4) of this Law or Section 184quater(4) of the Patent Law at the expiration of one year and three months from the international filing date referred to in Section 48quater(1) of this Law or Section 184quater(1) of the Patent Law, whichever is later”.

Special Provisions Concerning Conversion of Applications

48undecies. Conversion of an international application having been considered or recognized to be a patent application under Section 184ter(1) or 184vicies(4) of the Patent Law into a utility model application may not be made until, in respect of a Japanese language patent application referred to in Section 184sexies(2) of the Patent Law, after the proceeding under Section 184quinquies(1) of the Patent Law has been taken, and in respect of a foreign language patent application referred to in Section 184quater(1) of the Patent Law, after proceedings under the said subsection and Section 184quinquies(1) of the Patent Law have been taken and, further, after the fee to be paid under Section 195(2) of the Patent Law has been paid (or—in respect of an international application having been recognized as a patent application under Section 184vicies(4) of the Patent Law—after the decision referred to in the said subsection has been made).

Special Provisions Concerning Time Limit for Payment of Annual Fees

48duodecies. For the purposes of a payment of the annual fees for each year from the first to the third years with respect to an international utility model application, “simultaneously with the utility model application” in Section 32(1) shall be considered to have been replaced by “within the time limit for the submission of the national form paper referred to in Section 48quater(1) (in the case where a request for the national processing

JP039EN Models, Law (Consolidation), page 32/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN referred to in the proviso to Section 48quater(4) has been made, until the time of making that request for the national processing)”.

Time Limit for Making Request for Technical Opinion as to Registrability of Utility Model

48terdecies. For the purposes of a request for the opinion as to registrability of a utility model concerning an international utility model application, “any person” in Section 12(1) shall be considered to have been replaced by “after the expiration of the relevant time for the national processing referred to in Section 48quater(4), any person”.

Special Provisions Concerning Grounds for Invalidation

48quater decies. For the purposes of a trial for invalidation of utility model registration concerning a foreign language utility model application, “where the registration has been effected in respect of a utility model application with the amendment which does not comply with Section 2bis(2)” in Section 37(1)(i) shall be replaced by “where the features disclosed in the specification or drawings attached to the request of the utility model registration concerning a foreign language utility model application referred to in Section 48quater(1) does not remain within the scope of the features disclosed in the description, the claims or the drawings of the international application as of the international filing date referred to in Sec tion 48quater(1)”.

Application mutatis mutandis of Patent Law

48quindecies.—(1) Section 184septies (amendment under Article 19 of the Treaty concerning the Japanese language patent application) and Section 184opties(1) to (3) (amendment under Article 34 of the Treaty) of the Patent Law shall apply mutatis mutandis to the amendment of an international utility model application under the Treaty. In such a case, “Section 17bis(1)” in Sections 184septies(2) and 184opties(2) of the Patent Law shall read “Section 2bis(1) of the Utility Model Law”.

(2) Section 184undecies of the Patent Law (special provisions concerning patent administrator for residents abroad) shall apply mutatis mutandis to proceedings relating to an international utility model application.

(3) Section 184novies(6) and Section 184quater decies of the Patent Law shall apply mutatis mutandis to an international utility model application.

International Application Recognized as Utility Model Application by Decision

48sedecies.—(1) The applicant of an international application defined in Article 2(vii) of the Treaty may, where the receiving Office defined in Article 2(xv) of the Treaty has made a refusal referred to in Article 25(1)(a) of the Treaty or has made a declaration referred to in Article 25(1)(a) or (b) of the Treaty or the International Bureau defined in Article 2(xix) of the Treaty has made a finding referred to in Article 25(1)(a) of the Treaty in respect of the international application (only a utility model application) which contains the designation of

JP039EN Models, Law (Consolidation), page 33/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN Japan as a designated State referred to in Article 4(1)(ii) of the Treaty, request the Commissioner of the Patent Office as provided in an ordinance of the Ministry of Economy, Trade and Industry to make a decision referred to in Article 25(2)(a) of the Treaty within the time limit prescribed in an ordinance of the Ministry of Economy, Trade and Industry.

(2) A person who makes a request under the preceding subsection in respect of the international application made in a foreign language shall furnish to the Commissioner of the Patent Office at the time of making such a request a translation into Japanese of the description, the claims, the drawings (limited to any text matter of the drawings) and the abstract as well as other documents relating to the international application provided for in an ordinance of the Ministry of Economy, Trade and Industry.

(3) Where the request under Subsection (1) has been made, the Commissioner of the Patent Office shall decide whether the refusal, declaration, or finding referred to therein was justified under provisions of the Treaty and the Regulations under the Patent Cooperation Treaty.

(4) Where the Commissioner of the Patent Office has made a decision under the preceding subsection to the effect that the refusal, declaration, or finding referred to in the said subsection was not justified under the provisions of the Treaty and the Regulations under the Patent Cooperation Treaty, the international application concerned shall be recognized as a utility model application filed on the date which would be accorded as the international filing date if the said refusal, declaration, or finding were not made in respect of the said international application.

(5) For the purposes of the amendment of the international application having been recognized as a utility model application under the preceding subsection, “the filing date of the utility model application” in the proviso to Section 2bis(1) shall be replaced by “the date on which the decision under Section 48sedecies(4) has been made”.

(6) Sections 48sexies(1) and (2), 48septies, 48octies(3), 48novies, 48decies(1), (3) and (4), 48duodecies to 48quater decies of this Law, and Section 184ter(2), 184novies(6), 184duodecies(1) and 184quater decies of the Patent Law shall apply mutatis mutandis to an international application having been recognized as a utility model application under Subsection (4). In such a case, the technical replacement of words necessary to apply mutatis mutandis to these provisions shall be prescribed by Cabinet Order.

CHAPTER VIII MISCELLANEOUS PROVISIONS

Registration in Utility Model Register

49.—(1) The following matters shall be registered in the Utility Model Register kept in the Patent Office:

(i) the establishment, transfer, extinguishment, restoration or restriction on disposal of a utility model right;

JP039EN Models, Law (Consolidation), page 34/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (ii) the establishment, maintenance, transfer, modification, extinguishment or

restriction on disposal of an exclusive or non-exclusive license;

(iii) the establishment, transfer, modification, extinguishment or restriction on disposal of rights in a pledge upon a utility model right or an exclusive or non-exclusive license.

(2) The Utility Model Register, either in whole or in part, may be prepared by means of magnetic tapes (including other materials on which matters can be accurately recorded by an equivalent method—hereinafter referred to as “magnetic tapes”).

(3) Other matters relating to registration that are not provided for in this Law shall be prescribed by Cabinet Order.

Issuance of Utility Model Registration Certificate

50.—(1) When the establishment of a utility model right has been registered the Commissioner of the Patent Office shall issue a utility model registration certificate to the owner of the utility model right.

(2) Re-issuance of the certificate shall be prescribed by an ordinance of the Ministry of Economy, Trade and Industry.

Special Provisions for Utility Model Registrations or Utility Model Rights Based on Two or More Claims

50bis. For the purposes of the provisions of Sections 12(3) and 14bis(2) of this Law, Section 97(1) or Section 98(1)(i) of the Patent Law as applied under Section 26, Section 34(1)(iii), Section 37(2) of this Law, Section 125 of the Patent Law as applied under Section 41 of this Law, Section 132(1) of the Patent Law respectively as applied under Section 41 of this Law or under Section 174(3) of the Patent Law as applied under Section 45(1) of this Law, Section 44 of this Law, Section 176 of the Patent Law as applied under Section 45(1) of this Law, Section 193(2)(iv) of the Patent Law as applied under Section 49(1)(i) or Section 53(2) of this Law relating to the utility model registrations or the utility model rights covering two or more claims, the utility model registration shall be considered to have been granted, or the utility model right shall be deemed to exist, for each claim.

Indication of Existence of Utility Model Registration

51. The owner of a utility model right or an exclusive or non-exclusive license shall take steps, as prescribed in an ordinance of the Ministry of Economy, Trade and Industry, to mark articles covered by a registered utility model or their packaging with a statement to the effect that the articles are covered by a registered utility model (hereinafter referred to as “indication of a utility model registration”).

Prohibition of False Marking

52. The following acts shall be unlawful:

JP039EN Models, Law (Consolidation), page 35/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (i) the marking of an article not covered by a registered utility model, or the packaging

of such article, with an indication of a utility model registration or confusingly similar indication;

(ii) the assignment, lease or display for the purpose of assignment or lease of an article not covered by a registered utility model, where such article or its packaging is marked with an indication of a utility model registration or confusingly similar indication;

(iii) the inclusion in an advertisement of an indication that an article is covered by a registered utility model or a confusingly similar indication, for the purpose of causing others to manu facture or use the article or of assigning or leasing the article, where it is not covered by a registered utility model.

Utility Model Gazette

53.—(1) The Patent Office shall publish the Gazette containing the Utility Model.

(2) Section 193(2) (only (iv) to (vi), (viii) and (ix)) of the Patent Law shall apply mutatis mutandis to the Gazette containing the Utility Model.

Fees

54.—(1) The person specified hereunder shall pay the fee the amount of which shall be prescribed by Cabinet Order with the actual costs taken into consideration:

(i) person requesting extension of time limit under Section 5(1) of the Patent Law as applied under Section 2quinquies(1) of this Law, under Section 4 of the Patent Law applied under Section 32(3) or 45(2) of this Law, or change of date under Section 5(2) of the Patent Law as applied under Section 2quinquies(1) of this Law;

(ii) person making notification of succession in accordance with Section 34(4) of the Patent Law as applied under Section 11(2) of this Law;

(iii) person requesting re-issuance of utility model registration certificate;

(iv) person requesting issuance of certificate in accordance with Section 186(1) of the Patent Law as applied under Section 55(1) of this Law;

(v) person requesting issuance of copy or extract of documents in accordance with Section 186(1) of the Patent Law as applied under Section 55(1) of this Law;

(vi) person requesting inspection or copying of documents in accordance with Section 186(1) of the Patent Law as applied under Section 55(1) of this Law;

(vii) person requesting issuance of documents containing matters recorded in that part of the Utility Model Register as prepared on magnetic tape, in accordance with Section 186(1) of the Patent Law as applied under Section 55(1) of this Law.

JP039EN Models, Law (Consolidation), page 36/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN (2) The persons specified in the left-hand column of the attached table shall pay the fee

the amount of which shall be prescribed by Cabinet Order within the limit of the amounts specified in the right-hand column of the table.

(3) The two preceding subsections shall not apply where the person to pay the fee in accordance with the subsections is the Stateand the like .

(4) The provisions of Subsections (1) and (2) shall not apply where the person to pay the fee in accordance with these provisions is the State entitled to own jointly a utility model right or a right to obtain a utility model registration and the independent administrative institutions prescribed by Cabinet Order in Section 31(2) or the independent administrative institutions entitled to own jointly such rights prescribed by Cabinet Order in the same subsection.

(5) Where the State and the like and persons other than the State and the like own jointly a utility model right or a right to obtain a utility model registration and there is an agreement with respect to their shares of the right, the annual fees under Subsection (1) or (2) (limited to the fees prescribed by Cabinet Order) shall be a sum with prescribed fees under these subsections multiplied by the ratios of the shares of the persons other than the State and the like, and the persons other than the State and the like shall pay such sum, notwithstanding the provisions of these subsections.

(6) Where the amount of the fees calculated in accordance with the provision ofthe preceding subsection has a fractional figure less than 10 yen, that fractional figure shall be discarded.

(7) The payment of the fee under Subsections (1) and (2) shall be made by patent revenue stamps as prescribed by an ordinance of the Ministry of Economy, Trade and Industry. However, wherever so prescribed by an ordinance of the Ministry of Economy, Trade and Industry, such payment may be made in cash.

(8) A fee paid by mistake or in excess shall be refunded upon the request of the person making the payment.

(9) No request for a refund of a fee under the preceding subsection may be made after one year from the date of payment.

(10) Where the Commissioner of the Patent Office recognizes that a person making a request for technical opinion as to registrability of a claimed device in a utility model application or a registered utility model is the creator of the device claimed in the utility model application or the registered utility model or the creator’s heir and that he cannot afford to pay the fee for request for technical opinion as to registrability of utility model payable under Subsection (2) because of poverty, he may reduce the fee or exempt him therefrom as prescribed by Cabinet Order.

Application mutatis mutandis of Patent Law

JP039EN Models, Law (Consolidation), page 37/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN 55.—(1) Section 186 (request for certification, etc.) of the Patent Law shall apply

mutatis mutandis to utility model registrations.

(2) Sections 189 to 192 (transmittal) of the Patent Law shall apply mutatis mutandis to transmittal under this Law.

(3) Section 194 of the Patent Law shall apply mutatis mutandis to the procedure. In such a case, “examination” in Section 194(2) shall read “the technical opinion as to registrability of a utility model referred to in Section 12(1) of this Law”.

(4) Section 195ter of the Patent Law shall apply mutatis mutandis to measures under this Law or an order or ordinance thereunder.

(5) Section 195quater (restriction on appeals under Administrative Appeal Law) of the Patent Law shall apply mutatis mutandis to examiners’ decisions, trial decisions and rulings of dismissal of a demand for trial or retrial under this Law as well as to measures from which no appeal lies under this Law.

CHAPTER IX PENAL PROVISIONS

Offense of Infringement

56. Any person who has infringed a utility model right or an exclusive license shall be liable to imprisonment with labor not exceeding three years or to a fine not exceeding 3,000,000 yen.

Offense of Fraud

57. Any person who has obtained a utility model registration or a trial decision by means of a fraudulent act shall be liable to imprisonment with labor not exceeding one year or to a fine not exceeding 1,000,000 yen.

Offense of False Marking

58. Any person infringing Section 52 shall be liable to imprisonment with labor not exceeding one year or to a fine not exceeding 1,000,000 yen.

Offense of Perjury, etc.

59.—(1) A witness, expert witness or interpreter who, having taken an oath under this Law, has made a false statement or has given a false expert opinion or has interpreted falsely before the Patent Office or a court commissioned thereby shall be liable to imprisonment with labor for a term of not less than three months nor more than ten years.

(2) Where a person committing the offense in the preceding subsection has made a voluntary confession before, concerning the case, the certified copy of the interpretation is

JP039EN Models, Law (Consolidation), page 38/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN transmitted or the trial decision has become final and conclusive, his sentence may be reduced or suppressed.

Offense of Divulging Secrets

60. Where any present or former official of the Patent Office has divulged or made surreptitious use of the secrets relating to a device in a utility model application to which he had access in the course of his duties, he shall be liable to imprisonment with labor not exceeding one year or to a fine not exceeding 500,000 yen.

Dual Liability

61. Where an officer representing a legal entity or a representative, employee or any other servant of a legal entity or of a natural person has committed an act in violation of the provisions prescribed in the following paragraphs with regard to the business of the legal entity or natural person, the legal entity or the natural person shall, in addition to the offender, be liable to the fine prescribed in the following paragraphs:

(i) Section 56, a fine not exceeding 100 million yen;

(ii) Section 57 or 58, a fine not exceeding ¥30,000,000.

Administrative Penalties

62. Where a person who has taken an oath under Section 207(1) of the Code of Civil Procedure as applied under Section 151 of the Patent Law—as applied under Section 71(3) of the Patent Law as applied under Section 26 of this Law, Section 41 of this Law or Section 174(3) of the Patent Law as applied under Section 45(1) of this Law, respectively—has made a false statement before the Patent Office or a court commissioned thereby, he shall be liable to an administrative penalty not exceeding 100,000 yen.

63. Where a person who has been summoned by the Patent Office or a court commissioned thereby in accordance with this Law has failed to appear or has refused to take an oath, to make a statement, to testify, to give an expert opinion or to interpret, without a legitimate reason, he shall be liable to an administrative penalty not exceeding 100,000 yen.

64. Where a person who has been ordered by the Patent Office or a court commissioned thereby to produce or show documents or other evidence in accordance with the provisions of this Law relating to the examination or preservation of evidence has failed to comply with the order, without a legitimate reason, he shall be liable to an administrative penalty not exceeding 100,000 yen.

Attached Table (Related to Section 54)

Person liable to pay Amounts

1. Person filing utility model application ¥14,000 per case

JP039EN Models, Law (Consolidation), page 39/40 13/04/1959 (22/12/1999), No. 123 (No. 220)

YH II JAPAN 2. Person taking proceeding under Section 48quinquies(1) ¥14,000 per case

3. Person making request under Section 48sedecies(1) ¥14,000 per case

4. Person making request for technical opinion as to ¥42,000 per case plus registrability of a utility model ¥1,300 per claim

5. Person correcting a specification or drawings ¥1,400 per case

6. Person requesting interpretation in accordance with Sec tion ¥40,000 per case 71(1) of the Patent Law as applied under Section 26 of this Law

7. Person requesting arbitration decision ¥55,000 per case

8. Person requesting cancellation of arbitration decision ¥27,500 per case

9. Person demanding trial or retrial ¥49,500 per case plus ¥5,500 per claim

10. Person demanding intervention in trial or retrial ¥55,000 per case

* Entry into force: January 6, 2001.

JP039EN Models, Law (Consolidation), page 40/40 13/04/1959 (22/12/1999), No. 123 (No. 220)


Legislación Es reemplazado por (4 texto(s)) Es reemplazado por (4 texto(s))
Tratados Relacionado con (2 registros) Relacionado con (2 registros)
Datos no disponibles.

N° WIPO Lex JP039