À propos de la propriété intellectuelle Formation en propriété intellectuelle Respect de la propriété intellectuelle Sensibilisation à la propriété intellectuelle La propriété intellectuelle pour… Propriété intellectuelle et… Propriété intellectuelle et… Information relative aux brevets et à la technologie Information en matière de marques Information en matière de dessins et modèles industriels Information en matière d’indications géographiques Information en matière de protection des obtentions végétales (UPOV) Lois, traités et jugements dans le domaine de la propriété intellectuelle Ressources relatives à la propriété intellectuelle Rapports sur la propriété intellectuelle Protection des brevets Protection des marques Protection des dessins et modèles industriels Protection des indications géographiques Protection des obtentions végétales (UPOV) Règlement extrajudiciaire des litiges Solutions opérationnelles à l’intention des offices de propriété intellectuelle Paiement de services de propriété intellectuelle Décisions et négociations Coopération en matière de développement Appui à l’innovation Partenariats public-privé Outils et services en matière d’intelligence artificielle L’Organisation Travailler avec nous Responsabilité Brevets Marques Dessins et modèles industriels Indications géographiques Droit d’auteur Secrets d’affaires Académie de l’OMPI Ateliers et séminaires Application des droits de propriété intellectuelle WIPO ALERT Sensibilisation Journée mondiale de la propriété intellectuelle Magazine de l’OMPI Études de cas et exemples de réussite Actualités dans le domaine de la propriété intellectuelle Prix de l’OMPI Entreprises Universités Peuples autochtones Instances judiciaires Ressources génétiques, savoirs traditionnels et expressions culturelles traditionnelles Économie Financement Actifs incorporels Égalité des genres Santé mondiale Changement climatique Politique en matière de concurrence Objectifs de développement durable Technologies de pointe Applications mobiles Sport Tourisme PATENTSCOPE Analyse de brevets Classification internationale des brevets Programme ARDI – Recherche pour l’innovation Programme ASPI – Information spécialisée en matière de brevets Base de données mondiale sur les marques Madrid Monitor Base de données Article 6ter Express Classification de Nice Classification de Vienne Base de données mondiale sur les dessins et modèles Bulletin des dessins et modèles internationaux Base de données Hague Express Classification de Locarno Base de données Lisbon Express Base de données mondiale sur les marques relative aux indications géographiques Base de données PLUTO sur les variétés végétales Base de données GENIE Traités administrés par l’OMPI WIPO Lex – lois, traités et jugements en matière de propriété intellectuelle Normes de l’OMPI Statistiques de propriété intellectuelle WIPO Pearl (Terminologie) Publications de l’OMPI Profils nationaux Centre de connaissances de l’OMPI Série de rapports de l’OMPI consacrés aux tendances technologiques Indice mondial de l’innovation Rapport sur la propriété intellectuelle dans le monde PCT – Le système international des brevets ePCT Budapest – Le système international de dépôt des micro-organismes Madrid – Le système international des marques eMadrid Article 6ter (armoiries, drapeaux, emblèmes nationaux) La Haye – Le système international des dessins et modèles industriels eHague Lisbonne – Le système d’enregistrement international des indications géographiques eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange Médiation Arbitrage Procédure d’expertise Litiges relatifs aux noms de domaine Accès centralisé aux résultats de la recherche et de l’examen (WIPO CASE) Service d’accès numérique aux documents de priorité (DAS) WIPO Pay Compte courant auprès de l’OMPI Assemblées de l’OMPI Comités permanents Calendrier des réunions WIPO Webcast Documents officiels de l’OMPI Plan d’action de l’OMPI pour le développement Assistance technique Institutions de formation en matière de propriété intellectuelle Mesures d’appui concernant la COVID-19 Stratégies nationales de propriété intellectuelle Assistance en matière d’élaboration des politiques et de formulation de la législation Pôle de coopération Centres d’appui à la technologie et à l’innovation (CATI) Transfert de technologie Programme d’aide aux inventeurs WIPO GREEN Initiative PAT-INFORMED de l’OMPI Consortium pour des livres accessibles L’OMPI pour les créateurs WIPO Translate Speech-to-Text Assistant de classification États membres Observateurs Directeur général Activités par unité administrative Bureaux extérieurs Avis de vacance d’emploi Achats Résultats et budget Rapports financiers Audit et supervision
Arabic English Spanish French Russian Chinese
Lois Traités Jugements Recherche par ressort juridique

Règlementation de la loi sur les disques optiques de 2000, Malaisie

Retour
Version la plus récente dans WIPO Lex
Détails Détails Année de version 2000 Dates Entrée en vigueur: 15 octobre 2000 Émis: 1 janvier 2000 Type de texte Textes règlementaires Sujet Droit d'auteur

Documents disponibles

Texte(s) principal(aux) Textes connexe(s)
Texte(s) princip(al)(aux) Texte(s) princip(al)(aux) Anglais Optical Discs Regulations 2000        
 Optical Discs Regulations 2000

Page 32

OPTICAL DISCS REGULATIONS 2000

ARRANGEMENT OF REGULATIONS

Regulation

PART I

PRELIMINARY

1. Citation and commencement.

2. Interpretation.

3. Forms.

4. Fees.

5. Application for a licence.

6. Licence.

7. Renewal of licence.

8. Transfer of licence.

9. Replacement licence.

PART II

LICENCE

10. Certificate copy oflicence.

PARTIH

MANUFACTURER'S CODE

11. Manufacturer's code.

12. Marking standards.

PART IV

PROCEDURE FOR APPEAL

13. Notice of appeaL

14. Grounds of decision.

15. Determination of appeal.

16. Withdrawal of appeal.

17. Sending of documents.

PART V

MISCELLANEOUS

18. Register of Manufacturers of Optical Discs.

19. Maintenance of records.

SCHEDULE.

Page 33

Page 34

OPTICAL DISCS REGULATIONS 2000*

IN exercise of the powers conferred by section 56 of the Optical Discs Act 2000 the Minister makes the following regulations:

PART I

PRELIMINARY

1. Citation and commencement.

(1) These regulations may be cited as the Optical Discs Regnlations 2000.

(2) These Regulations come into operation on 15 October 2000.

2. Interpretation.

In these Regulations, unless the context otherwise requires-

"mirror block" means the component part of an injection moulding cavity which is used to form the optically smooth read-out surface of a compact disc (the side opposite of which is impressed with information-carrying pits), and is formed principally of a flat circular plate of highly polished material;

"matrix band" means the portion of the compact disc whose inner diameter is greater than the clamping area, and whose outer diameter is less than the Lead-In, which may be used for recording graphics and graphics characters on the compact disc surface;

"Lead-In" means the portion of the information area which precedes the program area (see diagram in First Schedule).

3. Forms.

The forms III the Second Schedule are prescribed' for use under these Regulations.

4. Fees.

(1) The fees in the Third Schedule are prescribed for the purposes of these Regulations.

(2) The fees shall be paid to the Controller by such means and in such manner as the Controller may direct.

*Publis!ied as PU(A} 38112000.

PART n

LICENCE

5. Application for a licence.

(l) An application for a licence under section 6 of the Act shall be made in Form ACO-I.

(2) An applicant who manufactures optical discs at more than one place shall specify each of the places in the application.

6. Licence.

(1) The fee payable for the grant of a licence shall be as prescribed.

(2) Every licensee shall pay the fee prescribed within twenty-one days from the date of grant of the licence.

(3) A licence issued or renewed shall be valid for a period not exceeding three years from the date of issue or expiry of such licence.

(4) Every licence granted shaH be in Form ACO-2 and shall be valid unless revoked under section 10 of the Act.

7. Renewal of licence.

(1) An application for the renewal of a licence shall be in Form ACO-1.

(2) The fee payable for the renewal of a licence shaH be as prescribed.

(3) Every licensee shaH pay the fee prescribed within twenty-one days from the date of grant of a renewal of the licence.

8. Transfer ofiicence.

An application for the transfer of a licence shall-

(a) state the full particulars of the facts on which the applicant relies on in support of his application; and

(b) be accompanied with the prescribed fee.

9. Replacement licence.

(1) An application for a replacement licence shall be made to the Controller in writing.

(2) An application under subregulation (1) shall be verified by a statutory declaration or a police report made by the licensee.

(3) Where the Controller is satisfied as to the reason for the loss of the licence, the Controller may issue a replacement in Form ACO-2 with the words "DUPLICATE" endorsed on the licence.

(4) The applicant shall pay the prescribed fee for the issuance of the replacement licence.

Page 35

Page 36

10. Certificate copy of licence.

(1) A licensee may apply in writing to the Controller for a certified copy of the licence if-

(a) the licence issued to the licensee is mutilated; or

(b) a certified copy of the licence is required for a valid reason.

(2) An application under subregulation (1) shall be-

(a) verified by a statutory declaration or a police report made by the licensee to the effect that the licence issued was mutilated; or

(b) accompanied with a statement specifying the reasons for the application,

as the case may be.

(3) The Controller may issue a certified copy of the licence to the applicant-

(a) if the Controller is satisfied that-

(1) the licence issued was mutilated; or

(ii) a certified copy is required for a valid reason; and

(b) upon payment of the prescribed fee.

(4) A certified copy of the licence issued by the Controller shaB be endorsed with the words "CERTIFIED TRUE COPY".

PART HI

MANUFACTURER'S CODE

11. Mani1fadi1rer~s code.

(l) A manufacturer's code consists of-

(a) a mastering code; and

(b) a mould code.

(2) A licensee who carries on the activity of mastering of optical discs shall be assigned a mastering code.

(3) A licensee who carries on the activity of replicating of optical discs shall be assigned a mould code.

(4) A licensee who carries on both activities of mastering and replicating of optical discs shall be assigned both mastering and mould codes.

12. Marking standards.

(1) The standard for the marking of a manufacturer's code on optical discs shall be as follows:

(a) the mastering code-

(i) shaH consist of the alphabet 'IFPI' followed by four additional characters which may be alphabetical or numerical commencing with the alphabet "L";

Oi) the code shall be added to the matrix band of the master during exposure on the laser beam recorder;

(iii) the code shall be positioned in the area which is between 18.0 mm from the center of the disc and the start of the "Lead-In", which is at a radius of 22.9 mm from the center;

(iv) the height of every digit and character of the code shall not be less than 0.5 mm;

(v) the code shaH be etched to a depth of 10-25 microns;

(vi) the code shall be legible without magnification;

(vii) the code shall be readable from left to right when viewed from the read-out side of the disc; and

(viii) the digit "IFPl" shaH be in upper case characters and shaH have either a linear or radial layout; and

(b) the mould code-

(i) shaH consist of the alphabet 'IFPI' followed by four additional characters which may be alphabetical or numerical;

(ii) the code shall be etched on the mirror block of each mould;

(iii) the height of the code shall not be less than 0.5 mm and shaH be legible without magnification;

(iv) the code shall be etched to a depth of 10-25 microns;

(v) the alphabets "IFPI" shall be in upper case;

(vi) the code shall be marked in either linear or radial layout;

(vii) the code shall be positioned in the area which is between i4.5 mm and 22.5 mm from the center of the read-through optical side of the disc; and

(viii) the code on each manufactured optical disc shall be readable from left to right when viewed from the read-through side of the disc.

PART IV

PROCEDURE FOR APPEAL

13. Notice of appeal.

(I) Any person ("the appellant") who is aggrieved by any decision of the Controller under Part HI of the Act may appeal by submitting a notice of appeal to the Minister within the time specified in subsection 18( 1) of the Act and a copy of such notice shall be sent to the Controller.

(2) The notice of appeal shall state-

(aj the full name, address and other particulars of the appellant;

(b) the decision with which he is aggrieved;

(c) the grounds on which the appellant proposes to rely on for the appeal; and

(d) such other information or contain such documents as may be necessary for the purposes of the appeal.

Page 37

Page 38

14. Grounds ofdecision.

On receipt of the notice of appeal the Controller shaH cause to be prepared within twenty-one days from the receipt of such notice a statement stating the grounds on which he arri;4Cd at his decision and shaH submit such grounds to the Minister.

15. Determination ofappeal.

The Minister shall as soon as is practicable proceed to determine the appeal and may, in the event that he requires further facts or evidence to be adduced or argument to be heard, set aside a date and time for the receiving of such facts or evidence or the hearing of such argument and shall inform the appellant and the Controller accordingly.

16. Withdrawal of appeal.

Where the appellant decides not to pursue his appeal he may withdraw the appeal at any time before the determination of the appeal whereupon the decision of the Controller shall be deemed to be final.

17. Sending of documents.

Every notice or document relating to an appeal shall be sent in duplicate to the Minister.

PART V

MISCELLANEOUS

18. Register ofManufadurers of Optical Discs.

(I) The Controller shall keep and maintain a Register of Manufacturers of Optical Discs in the form prescribed in the Fourth Schedule.

(2) A person may inspect the Register during working hours and may make copies of or take extracts from the Register subject to the payment of the prescribed fees.

19. Mainteuance of records.

A licensee shall keep and maintain a record of his manufacturing activities in the form prescribed in the Fifth Schedule.

Page 39

FIRST SCHEDULE

OPTICAL DISCS ACT 2000

OPTICAL DISCS REGULATIONS 2000

(Regulation 2)

Lead-In (maximum starting diameter 46 mm)

Program Area

- starting diameter 50 mm + 0/-0.4 - maximum diameter 116 mm

Lead-Out (minimum outer diameter == program area outer diameter+1)

Page 40

SECOND SCHEDULE

FORMS

(Regulation 3)

AKTA CAKERA OPTIK 2000 (OPTICAL DISCS ACT 2000)

PERATURAN-PERATURAN CAKERA OPTIK 2000 (OPTICAL DISCS REGULATIONS 2000)

BORANGIFORM ACO-!

Permohonan bagi Lesen PengiIangan dan Pembaharuan Lesen Application for Manufacturing Licence and Renewal of Licence

Pengawal Cakera Optik. Controller Optical Discs. Bahagian Penguatkuasa. Enforcement Division.

Peraturan 5 dan Peraturan 7 (Regulations 5 and 7)

Kementerian Perdagangan Dalam Negeri dan Hal Ehwa! Pengguna. Ministry of Domestic Trade and Consumer Affairs.

[Tandakan ( ..J ) dalam kolak yang berkenaanJ [Tick ( ..J ) in the appropriate box]

(a) Permohonan untuk Application for

(i) Lesen Pengilangan untuk: Manufacturing Licence for:

(A) Aktiviti Penyediaan Salinan lnduk c=J Mastering Activity

(B) Aktiviti Pereplikaan c=J Replicating Activity

(b) Jenis permohonan Type of application

NOTA NOTE

0) Permohonan bam New application

(ii) Pembaharuan Renewal

lib ruang yang disediakan tidak mencukupi untuk memberi perincian, sila gunakan !ampiran. Seliap lampiran hendaklah ditandatangani oleh pemohon.

(If the space provided is not sUfficient to provide derails. please attach annexure(s). Each annexure shall be signed by the applicant).

A. BUTIR-BUTIR PEMOHON PARTICULARS OF APPLICANT

I. Nama pemohon dan alamat surat menyurat Name of applicant and correspondence address

No. Telefon Telephone No.

Orang untuk dihubungi: Contact person

2. Nama dan alamat pejabat berdaftar Name and address of registered office

No. TeJefoll Telephone No.

No. Telefaks Tetefax No.

3. No. Pendaftaran Registration No.

4. Alamal Kilang

No. Telefaks Telefax No.

Jawatan Designation

(Jika pemohon mengilang cakera oplik di lebih daripada satu kilang, sila nyatakan setiap kiiang itu)

Address of Fac(ories (Where (he applicant manufactures optical discs at more than ollefactory. please specify each of the factories)

5. Alamal Stor Address of Stores

Page 41

Page 42

6. Butir-butir Pengarah/Pekongsi Particulars of Directors/Partners

Nama dan alamat kediaman Name and residential address

Warganegara Nationality

B. BUTIR-BUTIR PENGILANGAN CAKERA OPTIK PARTICULARS OF OPTICAL DISC MANUFACTURED

I. Keluaran Product

% saham dipegang dalam syarikat ! % pekongsian

% shares held in the company I % of

partnership

Pengeluaran tahunan sebenar Actual annual production

KeJuaran Products

Kuantiti Nilai di kilang Quantity Ex·factory value

(RM)

2, Butir-Butir Salman Pengeluaran Production Lines Particulars

(a) Penyediaan Salinan fnduk Mastering

Nombor Saluran Nama dan Nombor Model Kod Pengilang sedia ada Pengeluaran Mesin Pengilangan Existing Manufacturer's

Production Line Name and Model Number Number of Manufacturing Machine

(b) Pereplikaan (termasuk acuan simpanan) Replications (including spare mauld)

Nombor Saluran Pengeluaran

Production Line Number

3. PASARAN MARKET

Keluaran Products

Untuk pasaran tempatan For local market

Untuk pasaran eksport For export market

Nama dan Nomhor Model Mesin Pengilangan

Name and Model Number of

Manufacturing Machine

% Pasaran % Market

Tahun I Tahun 2 Year 1 Year 2

Nombor Sid Acuan

Mould Serial Number

Tahun 3 Year 3

Code

Kod Pengilang sedia ada Existing

Manufacturer'S Code

Nama dan alamat pelanggan

Name and address of clients

Page 43

Page 44

4. BAHAN MENTAH - POUKARBONAT RAW MATERIAL - POLYCARBONATE

SUMBER SOURCE

Pengilang Tempatan Local Manufacturer

Nama dan Kuantiti Nilai Nama dan alamat setahun setahun alama!

Import Import

Kuantiti Nilai setahun selahun

pembekal Quantity per Value per pembekal Quantity per Value per Name and annum annum Name and annum address of address of

supplier supplier

C. BUTIR-BUTIR LESENfKELULUSAN DARIPADA AGENSI LAIN DETAILS OF LICENCE/APPROVAL OF OTHER AGENCIES (Sila sertakan salinannya) (Please enclose copies)

Jenis Kelulusan Type of Approval

I. pjhak Berkuasa Tempatan Local Authority

2. Kebenaran di bawah Akla Penyelarasan Perindustrian 1975 Approval under The Industrial Co-ordination Act 1975

3. Kebenaran di bawah Perintah Kastam (Larangan Mengenai Import) 198! Approval under the Customs (Prohibition of Imports) Order 1981

4. Kelulusan di bawah Akta Perbadanan Kemajuan Filem Nasional Malaysia 1981 Approval under the Perbadanan Kemajuan Fitem Nasional Malaysia Act 1981

5......................................................................................... .

Rujukan Reference

annum

D. KEBENARAN DARIPADA TUAN PUNYA HAKCIPTA/PEMEGANG LESEN EKSKLUSIF CONSENT FROM OWNER OF COPYRIGHT/EXCLUSIVE LICENSEE (Sila sertakan salinannya) (Please enclose copies)

E. PERAKUAN PEMOHON APPLICANT'S DECLARATION

Saya mengaku dan mengesahkan bahawa semua maklumal dan butir-butir yang dinyatakan dalam borang ini dan salinan dokumen yang dilampirkan adalah benar.

! hereby declare that 10 the best ofmy knowledge and beliefall the informations and the particulars staled in this form and the photacopies of documents annexed are true.

Tarikh/Date: .......................................... .

F. UNTUK KEGUNAAN RASMI PEJABAT FOR OFFICIAL USE

l. PENDAPAT OPINION

Permohonan lengkap/tidak lengkap* Application complete/not complete

Syor: Recommendation:

Tandatangan Pemohon & Meterai Perniagaan Signature of Applicant & Business Seal

Nama/Name: ..................................................... .

No. Karl Pengenalan/ldentity Card No.:

JawatanlDesignation: ........................................ .

............................................ ':' .. •.•.•..•.•..•.•.••..••..•.• ~ •••. , •••.•••. ·u ..•. · ......................................... .

* Potong mana yang tidak berkenaan Delete whichever is not applicable

Tarikh/Date: ................................... . Tandatangan Pegawai/Signature ofOfficer

Nama/Name: .......................................... ..

Page 45

Page 46

2. KEPUTUSAN DECISION

Permohonall diluluskan Application approved

Permohonan ditolak Application rejected

TarikhlDate: .................................. . Tandatangan Pengawal/Signature ofControiler

Nama/Name: .................................................. .

3. KOD PENGILANG MANUFACTURER'S CODE

(a) Penyediaan Salinan Induk Mastering

Nombor Saluran Nombor Model Pengeluaran Mes!n Pengilangan

Production Line Model Number of Number Manufacturing

Machine

(b) Pereplikaan (termasuk acuan simpanan) Replications (including spare mould)

Nombor Saluran Nombor Model Pengeluaran Mesin Pengilangan

Production Line Model Number of Number Manufacturing

Machine

Nombor Siri Kod Pengilang Acuan Manufacturer'S

Mould Serial Code Number

Nombor Siri Kod Pengilang Acuan Manufacturer's

Mould Serial Code Number

KEMENTERIAN PERDAGANGAN DALAM NEGERI DAN HAL

EHWAL PENGGUNA

BORANGIFORM ACO-2

MINISTRY OF DOMESTIC TRADE AND CONSUMER

AFFAIRS

AKTA CAKERA OPTIK 2000 (OPTICAL DISCS ACT 2000)

PERATURAN-PERATURAN CAKERA OPTIK 2000 (OPTICAL DISCS REGULATIONS 2000)

No. Siri: Serial No.:

Lesen diberikan kepada Licence is granted to

Nama Perniagaan Name of Business

beralamat di of

Peraturan 6 (Regulations 6)

No. Lesen: Licence No:

LESEN PENGILANGAN CAKERA OPTIK OPTICAL DiSCS MANUFACTURING LICENCE

(Alamat BerdaftarlRegistered Address)

untuk menjalankall pengilallgall cakera optik dari ..."." ... " ... " ........" .. " .."" ........ ".".. " ................ ..

to manufacture optical discs from

hingga .................................................................................................................................................. ..

to

Page 47

Page 48

tertakluk kepada peruntukan Akta Cakera Oplik 2000 dan peraturan-peraturan yang dibuat di bawahnya, dan syarat-syarat yang dilampirkan bersama- subject to the provisions of the Optical Discs Act 2000 and Ihe regulations made thereunder, and the conditions attached herewith-

KOD PENGILANG MANUFACTURER'S CODE

Amaun/Amount: RM

Resil No'/Receipt No:

o o

Bertarikh pada................hh....................................20......... ..

Dated this......................day of. ............................20......... ..

Regulation

1. Regulation 6

2. Regulation 7

3. Regualtion 8

4. Regulation 9

5. Regulation 10

6. Regulation 18

THIRD SCHEDULE

FEES

(Regulation 4)

Matters

Grant of licence (aJ principal place (b) each place

Renewal of licence (a) principal place (b) each place

Transfer of licence

Replacement of licence

Certified copy of licence

Extract of Register

Pengawal Cakera Optik Controller of Optical Discs

Amount of Fees (RM)

2,000 per year 1,000 per year

2,000 per year 1,000 per year

2,000 each application

100 each replacement

100 per copy

5 per copy

Name/Nome:

AlamatlAddress:

No. Tclefon: Telephone No.

Tarikh Tempoh Lesen Kesahan

Dikeluarkan Lesen

Nombor Saluran

Pengeluaran Date of Licem:e LiJ.:enCt: PrOdU('lion

issued Validiry LineJ Period 'Number

JADUAL KEEMPATIFoURTH SCHEDULE

AKTA CAKERA OPTIK 2000 (OPTICAL DISCS ACT 2000)

PERATURAN-PERATURAN CAKERA OPTIK 2000 (OPTICAL DISCS REGULATIONS 2000)

(Peraturan 18) (Regulation 18)

DAFTAR PENGILANG CAKERA OPTIK

REGISTER OF MANUFACTURERS OF OPTICAL DISCS

Penyediaan Salinan Induk

Nama dan Nombar Model

Mesin Name and Model

Machine Number

No. Lesen Licenet No.

No. Telefaks Te/eJax No.

Kod PengilanglManuJacturer's Code

Nombor Nombor Kad Saluran

Pengeluaran Code Production

Number Lines Number

Pereplikaan

Nama dan Nombor Nambar Model Siri

Mesin Acuan Name and Model Mould

Machme Serial Number Number

Nombor Kad

Code Number

-

I

"1:i

'"fJQ('I ~ \0

Page 50

JADUAL KELlMAIF1FTH SCHEDULE

AKTA CAKERA OPTIK 2000 (OPTICAL DISCS ACT 2000)

PERATURAN-PERATURAN CAKERA OPTIK 2000 (OPTICAL DISCS REGULATIONS 2000)

(Peraturan 19) (Regulation 19)

REKOD PENGILANG CAKERA OPTIK RECORD OF MANUFACTURERS OF OPTICAL DISCS

Bulan/Month ................................... .

BAHAGIAN I PART I

PengilanganlManufacturing

I

BiL Tarikh No. Date

Kuantiti Yang Dikilangkan

Quantity Manufactured

PengedaranlDistribution

Pasaran Tempatan Pasaran Eksport Local Market Export Market

Kuantiti Nama dan Kuantiti Nama dan Quantity Alamat Quantity Alamat

Pelanggan Pelanggan Name and Name and Address of Address of

Client Client -------------

Catatan Note

'I::) P>

\JQ (l)

v.

BAHAGlAN II PART Il

Bi!. No.

Nama dan AJamal Tuan punya Hakcipta/Pemegang Lesen Eksklusif

Name and Address of Owner of Copyright/Exclusive Licensee

NAMA TUAN PUNYA HAKCIPTA NAME OF OWNER OF COPYRIGHT

Tajuk Karya Title of Works

Tarikh Perjanjian Tempoh Date of Agreement Period

---

>-c;i

'"(fQ(') Vl tv

BAHAGIAN III PART 1Jl

Bit No.

Tarikh Date

Made 11 October 2000.

BAHAN MENTAH - POLIKARBONAT RAW MATERIAL - POLYCARBONATE

Bulan/Month

PEMBELlANIPURCHASED

Baki Stok Kuantiti Jumlah Nama dan Terdahulu PembeIian Stok Alamat Bq,/ance Quntity Semasa Pembekal

of Purchased «a) + (b)) Name and Previous Total of Address

Stock Current of Stock Supplier

«a) + (b)) (a) (b)

PENGGUNAANIUSAGE

Bit Tarikh Kuantiti No. Date Digunakan

QuantifY Used

-- ------ -- --

CATATAN

Nyatakan cara pelupusan lain-

(jika ada) NOTE

State other manner of disposal·

(if any)

'"0

~ lh W


Législation Se rapporte à (1 texte(s)) Se rapporte à (1 texte(s)) Référence du document de l'OMC
IP/N/1/MYS/C/2
Aucune donnée disponible

N° WIPO Lex MY026