Об интеллектуальной собственности Обучение в области ИС Обеспечение уважения интеллектуальной собственности Информационно-просветительская работа в области ИС ИС для ИС и ИС в области Информация о патентах и технологиях Информация о товарных знаках Информация о промышленных образцах Информация о географических указаниях Информация о новых сортах растений (UPOV) Законы, договоры и судебные решения в области ИС Ресурсы в области ИС Отчеты в области ИС Патентная охрана Охрана товарных знаков Охрана промышленных образцов Охрана географических указаний Охрана новых сортов растений (UPOV) Разрешение споров в области ИС Деловые решения для ведомств ИС Оплата услуг в области ИС Органы по ведению переговоров и директивные органы Сотрудничество в целях развития Поддержка инновационной деятельности Государственно-частные партнерства Инструменты и сервисы на базе ИИ Организация Работа с ВОИС Подотчетность Патенты Товарные знаки Промышленные образцы Географические указания Авторское право Коммерческая тайна Академия ВОИС Практикумы и семинары Защита прав ИС WIPO ALERT Информационно-просветительская работа Международный день ИС Журнал ВОИС Тематические исследования и истории успеха Новости ИС Премии ВОИС Бизнеса Университетов Коренных народов Судебных органов Генетические ресурсы, традиционные знания и традиционные выражения культуры Экономика Финансирование Нематериальные активы Гендерное равенство Глобальное здравоохранение Изменение климата Политика в области конкуренции Цели в области устойчивого развития Передовых технологий Мобильных приложений Спорта Туризма PATENTSCOPE Патентная аналитика Международная патентная классификация ARDI – исследования в интересах инноваций ASPI – специализированная патентная информация Глобальная база данных по брендам Madrid Monitor База данных Article 6ter Express Ниццкая классификация Венская классификация Глобальная база данных по образцам Бюллетень международных образцов База данных Hague Express Локарнская классификация База данных Lisbon Express Глобальная база данных по ГУ База данных о сортах растений PLUTO База данных GENIE Договоры, административные функции которых выполняет ВОИС WIPO Lex – законы, договоры и судебные решения в области ИС Стандарты ВОИС Статистика в области ИС WIPO Pearl (терминология) Публикации ВОИС Страновые справки по ИС Центр знаний ВОИС Серия публикаций ВОИС «Тенденции в области технологий» Глобальный инновационный индекс Доклад о положении в области интеллектуальной собственности в мире PCT – международная патентная система Портал ePCT Будапештская система – международная система депонирования микроорганизмов Мадридская система – международная система товарных знаков Портал eMadrid Cтатья 6ter (гербы, флаги, эмблемы) Гаагская система – система международной регистрации образцов Портал eHague Лиссабонская система – международная система географических указаний Портал eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange Посредничество Арбитраж Вынесение экспертных заключений Споры по доменным именам Система централизованного доступа к результатам поиска и экспертизы (CASE) Служба цифрового доступа (DAS) WIPO Pay Текущий счет в ВОИС Ассамблеи ВОИС Постоянные комитеты График заседаний WIPO Webcast Официальные документы ВОИС Повестка дня в области развития Техническая помощь Учебные заведения в области ИС Поддержка в связи с COVID-19 Национальные стратегии в области ИС Помощь в вопросах политики и законодательной деятельности Центр сотрудничества Центры поддержки технологий и инноваций (ЦПТИ) Передача технологий Программа содействия изобретателям (IAP) WIPO GREEN PAT-INFORMED ВОИС Консорциум доступных книг Консорциум «ВОИС для авторов» WIPO Translate для перевода Система для распознавания речи Помощник по классификации Государства-члены Наблюдатели Генеральный директор Деятельность в разбивке по подразделениям Внешние бюро Вакансии Закупки Результаты и бюджет Финансовая отчетность Надзор
Arabic English Spanish French Russian Chinese
Законы Договоры Решения Просмотреть по юрисдикции

Закон «О топологиях интегральных микросхем» 1996 года (Закон № 19 1996 года с изменениями, внесёнными Законом № 18 2000 года), Тринидад и Тобаго

Назад
Предшествующая редакция  Перейти к последней редакции на WIPO Lex
Подробности Подробности Год версии 2000 Даты вступление в силу: 1 декабря 1997 г. Опубликован: 6 августа 1996 г. Одобрено: 2 августа 1996 г. Тип текста Основное законодательство по ИС Предмет Топологии интегральных микросхем

Имеющиеся тексты

Основной текст(-ы) Смежный текст(ы)
Основной(ые) текст(ы) Основной(ые) текст(ы) Английский Layout-Designs (Topographies) of Integrated Circuits Act, 1996 (Act No. 19 of 1996, as amended by Act No. 18 of 2000)        

Layout-Designs (Topographies) of Integrated Circuits Act, 1996*

No. 19 of 1996, as amended by Act No. 18 of 2000

ARRANGEMENT OF SECTIONS

Section

Short title and commencement............................................................... 1 Interpretation.......................................................................................... 2 Protection............................................................................................... 3 Originality.............................................................................................. 4 Right to protection ................................................................................. 5 Effect of protection ................................................................................ 6 Commencement and duration of protection ........................................... 7 Filing requirements ................................................................................ 8 Register; registration and publication ................................................... 9 Right to transfer; rectification of register .............................................. 10 Changes in ownership; contractual licences.......................................... 11 Cancellation ........................................................................................... 12 Representation ....................................................................................... 13 Infringement; enforcement of exclusive right ....................................... 14 Offences................................................................................................. 15 Exploitation by a government agency or third person............................ 16 Exercise of discretionary powers; extension of time............................. 17 Competence of Court; appeals .............................................................. 18 Application of international treaties....................................................... 19 Regulations ............................................................................................ 20

An Act to provide for the protection of layout-designs (topographies) of integrated circuits.

Short title and commencement

1.—(1) This Act may be cited as the Layout-Designs (Topographies) of Integrated Circuits Act, 1996.

(2) This Act shall come into force on a date to be fixed by the President by Proclamation.

Interpretation

2. In this Act—

“Controller” means the Controller of the Intellectual Property Office appointed under

section 3 of the Patents Act and any reference to the Controller shall be construed as including

a reference to any officer discharging the functions of the Controller;

“Court” means the High Court;

“integrated circuit” means a product, in its final form or an intermediate form in which the elements, at least one of which is an active element, and some or all of the interconnections are integrally formed in and/or on a piece of material and which is intended to perform an electronic function;

“layout-design” is synonymous with “topography” and means the three-dimensional disposition, however expressed, of the elements, at least one of which is an active element, and of some or all of the inter-connections of an integrated circuit, or such a three-dimensional disposition prepared for an integrated circuit intended for manufacture;

“Minister” means the Minister to whom responsibility for intellectual property is assigned;

“Register” means the Register of Layout-Designs (Topographies) of Integrated Circuits;

“right holder” means the person who is to be regarded as the beneficiary of the protection referred to in section 6.

Protection

3.—(1) Protection under this Act may be obtained for layout-designs of integrated circuits if and to the extent that they are original within the meaning of section 4.

(2)
Registration may only be applied for if the layout-design has not yet been commercially exploited, or has been commercially exploited for not more than two years anywhere in the world.
(3)
Protection under this Act shall not be available for layout-designs which have been commercially exploited, anywhere in the world, for more than two years prior to the entry into force of this Act.

Originality

4.—(1) A layout-design shall be considered to be original if it is the result of its creator’s own intellectual effort and is not commonplace among creators of layout-designs and manufacturers of integrated circuits at the time of its creation.

(2) A layout-design consisting of a combination of elements and inter-connections that are commonplace shall be protected only if the combination taken as a whole is original within the meaning of subsection (1).

Right to protection

5.—(1) The right to layout-design protection shall belong to the creator of the layout-design and may be assigned or transferred by succession.

(2)
Where several persons have jointly created a layout-design, the right to layout-design protection shall belong to them jointly.
(3)
Where the layout-design has been created in execution of a commission or an employment contract, the right to layout-design protection shall belong, in the absence of contractual provisions to the contrary, to the person who commissioned the work or to the employer.

Effect of protection

6.—(1) Protection under this Act shall not depend upon whether or not the integrated circuit which incorporates the protected layout-design is itself incorporated in an article.

(2)
Subject to subsection (3) and to section 14, the protection shall have the effect that the following acts shall be unlawful if performed without the authorization of the right holder:
(a)
reproducing, whether by incorporation in an integrated circuit or otherwise, the protected layout-design in its entirety or any part thereof, except the act of reproducing any part that does not comply with the requirement of originality referred to in section 4;
(b)
importing, selling or otherwise distributing for commercial purposes the protected layout-design, an integrated circuit in which the protected layout-design is incorporated or an article incorporating such an integrated circuit in so far as it continues to contain an unlawfully reproduced layout-design.
(3) The effect of protection of a layout-design under this Act shall not extend to—
(a)
the reproduction of the protected layout-design for private purposes or for the sole purpose of evaluation, analysis, research or teaching;
(b)
the incorporation in an integrated circuit of a layout-design created on the basis of such analysis or evaluation and which is itself original in the meaning of section 4 or the performance of any of the acts referred to in subsection (2) in respect of that layout-design;
(c)
the performance of any of the acts referred to in subsection (2)(b) where the act is performed in respect of a protected layout-design, or in respect of an integrated circuit in which such a layout-design is incorporated, that has been put on the market by or with the consent of the right holder;
(d)
the performance of any of the acts referred to in subsection (2)(b) in respect of an integrated circuit incorporating an unlawfully reproduced layout-design or any article incorporating such an integrated circuit where the person performing or ordering such an act did not know and had no reasonable ground to know, when acquiring the integrated circuit or the article incorporating such an integrated circuit, that it incorporated an unlawfully reproduced layout-design; however after the time that such person has received sufficient notice that the layout-design was unlawfully reproduced, that person may perform any of those acts only with respect to the stock on hand or ordered before such time and shall be liable to pay to the right holder a sum equivalent to a reasonable royalty such as would be payable under a freely negotiated licence in respect of such a layout-design; or
(e)
the performance of any of the acts referred to in subsection (2)(b) where the act is performed in respect of an identical layout-design which is original and has been created independently by a third party.

Commencement and duration of protection

7.—(1) Protection of a layout-design under this Act shall commence—

(a)
on the date of the first commercial exploitation, anywhere in the world, of the layout-design by or with the consent of the right holder, provided that an application for protection is filed by the right holder with the Controller within the time limit referred to in section 3(2); or
(b)
on the filing date accorded to the application for the registration of the layout-design filed by the right holder, if the layout-design has not been previously exploited commercially anywhere in the world.
(2)
Protection of a layout-design under this Act shall terminate at the end of the tenth calendar year after the date of commencement of protection.

Filing requirements

8.—(1) An application for the registration of a layout-design shall be in writing and shall be filed with the Controller.

(2)
A separate application shall be filed for each layout-design.
(3)
The application shall—
(a)
contain a request for registration of the layout-design in the register and a brief and precise designation of the layout-design;
(b)
indicate the name, address, nationality and, if different from the address, the habitual residence of the applicant;
(c)
be accompanied by the authorization of agent appointing the representative of the applicant, if any;
(d)
be accompanied by a copy or drawing of the layout-design together with information defining the electronic function which the integrated circuit is intended to perform but the application may omit such parts of the copy or drawing that relate to the manner of manufacture of the integrated circuit, provided that the parts submitted are sufficient to allow the identification of the layout-design;
(e)
specify the date of first commercial exploitation of the layout-design anywhere in the world or indicate that such exploitation has not commenced; and
(f) provide particulars establishing the right to protection under section 5.
(4)
Where an application does not duly comply with the requirements of subsection (3), the Controller shall immediately notify the applicant of the defects and invite him to correct them within two months.
(5)
Where the defects are corrected within the time limit under subsection (4), the Controller shall accord as the filing date the date of receipt of the application, provided that, at the time of receipt, the application contained an express or implicit indication that the registration of a layout-design is requested and indications allowing the identity of the applicant to be established and was accompanied by a copy or drawing of the layout-design.
(6)
Where the requirements of subsection (5) were not complied with at the date of receipt of the application but are complied with within the time limit, the date of receipt of the required correction shall be deemed to be the filling date of the application.
(7) The Controller shall confirm the filing date and communicate it to the applicant.
(8)
Where the defects are not corrected within the time limit, the application shall be deemed not to have been filed.
(9)
Each application for protection of a layout-design shall be subject to the payment of the prescribed fee.
(10)
Where the fee is not paid, the Controller shall notify the applicant that the application will be deemed not to have been filed unless payment is made within two months from the date of the notification and where the application fee is not paid within that time limit, the application shall be deemed not to have been filed.

Register; registration and publication

9.—(1) The Controller shall maintain a register in which he shall record all matters required by this Act to be recorded.

(2)
Where an application complies with the requirements of section 8, the Controller shall register the layout-design in the Register without examination of the originality of the layout-design, the applicant’s entitlement to protection or the correctness of the facts stated in the application.
(3)
The Register shall contain the number, title, filing date and, where indicated in the application under section 8(3)(e), the date of first commercial exploitation, anywhere in the world, of the layout-design as well as the name and address of the right holder and other prescribed particulars.
(4)
Any person may consult the Register and obtain extracts therefrom, subject to the payment of the prescribed fee.

(5) The registration of a layout-design shall be published in the prescribed manner.

Right to transfer; rectification of register

10.—(1) Where the essential content of the application has been taken from the layout-design of another person without his consent, that other person may, in writing, request the Controller to transfer the application to him.

(2)
Where the application has already resulted in a registration, that person may, within three years from the publication of the registration, in writing, request the Controller to transfer the registration to him and to rectify the entry in the Register accordingly.
(3)
The Controller shall send forthwith a copy of such a request to the right holder, and, within the prescribed period and in the prescribed manner, the right holder may send to the Controller a counter-statement of the grounds on which he relies.
(4)
Where the right holder sends a counter-statement, the Controller shall furnish a copy thereof to the person requesting the transfer and, after hearing the parties, if either or both wish to be heard, and considering the merits of the case, shall decide whether the application or registration should be transferred and, where applicable, whether the Register should be rectified.

Changes in ownership; contractual licences

11.—(1) Any change in the ownership of a protected layout-design shall be in writing.

(2)
Once the layout-design has been registered, the change in ownership shall, at the request of any interested party, made to the Controller, be recorded and published by the Controller and such change shall have no effect against third parties until it has been recorded.
(3)
Any licence contract concerning a layout-design shall, upon registration of the layout-design, be submitted to the Controller who shall keep its contents confidential but shall publish a reference thereto and the licence contract shall have no effect against third parties until such submission has been made.

Cancellation

12.—(1) Any interested person may apply to the Court for the cancellation of the registration of a layout-design on the grounds that—

(a)
the layout-design is not protectable under sections 3 and 4;
(b)
the right holder is not entitled to protection under section 5; or
(c)
where the layout-design has been commercially exploited, anywhere in the world, before the filing of the application for registration of the layout-design, the application was not filed within the time limit referred to in sections 3(2) and 7(n( �I>(a).
(2)
Where the grounds for cancellation are established with respect only to a part of the layout-design, only the corresponding part of the registration shall be cancelled.
(3)
Any cancelled layout-design registration, or part thereof, shall be regarded as null and void from the date of the commencement of protection.
(4)
The Registrar of the Court shall notify the Controller of the decision of the Court or the decision on any appeal therefrom and the Controller shall record it and publish a reference thereto as soon as possible.

Representation

13. Where an applicant’s ordinary residence or principal place of business is outside Trinidad and Tobago, he shall be represented by an attorney-at-law resident and practising in Trinidad and Tobago.

Infringement; enforcement of exclusive right

14.—(1) Infringement shall consist of the performance of any act which is unlawful under section 6.

(2)
On the request of the right holder, or of his licensee if the latter has requested the right holder to institute court proceedings for a specific relief and the right holder has refused or failed to do so within a reasonable time, the Court may grant an injunction to prevent infringement or an imminent infringement, award damages and grant any other remedy provided for in the general law.
(3)
Proceedings under subsection (2) may be initiated only after an application for registration of the layout-design has been filed with the Controller.

Offences

15.—(1) Any person who, without authorization, knowingly performs any act which is unlawful under section 6, shall be guilty of an offence and is liable on summary conviction to a fine of ten thousand dollars and to imprisonment for five years and the Court may also order the seizure, forfeiture and destruction of the layout-designs, integrated circuits or articles concerned and of any materials or implements, the predominant use of which has been in the commission of the offence.

Exploitation by a government agency or third person

16.—(1) Where—

(a)
the public interest, in particular, national security, nutrition, health or the development of other vital sectors of the national economy requires the exploitation of a protected layout-design for public noncommercial use; or
(b)
a judicial or administrative body has determined that the manner of exploitation of a protected layout-design, by the right holder or his licensee, is anti-competitive, and the

Minister is satisfied that the exploitation of the layout-design in accordance with this section would remedy such practice,

the Minister may decide that, even without the authorization of the right holder, a Government agency or a third person designated by the Minister may exploit the layout-design.

(2)
The exploitation of the layout-design shall be—
(a)
limited, in scope and duration, to the purpose for which it was authorized;
(b)
predominantly for the supply of the domestic market;
(c)
non-exclusive; and
(d)
subject to the payment to the right holder of an adequate remuneration therefor, taking into account the economic value of the Minister’s authorization, as determined in the Minister’s decision and, where applicable, the need to correct anticompetitive practices.
(3)
Upon request of the right holder or of the beneficiary of the authorization, the Minister may, after hearing the parties, if either or both wish to be heard, vary the terms of the decision authorizing the exploitation of the layout-design to the extent that changed circumstances justify such variation.
(4)
Upon the request of the right holder, the Minister shall terminate the authorization if he is satisfied that the circumstances which led to his decision have ceased to exist and are unlikely to recur or that the beneficiary of the authorization has failed to comply with the terms of the authorization.
(5)
Notwithstanding subsection (4), the Minister shall not terminate an authorization if he is satisfied that the adequate protection of the legitimate interests of the beneficiary of the authorization justifies the maintenance of the authorization.
(6)
Where a third person has been designated by the Minister in accordance with subsection (1), the authorization may only be transferred with the enterprise or business of the beneficiary of the authorization or with the part of the enterprise or business within which the layout-design is being exploited.
(7)
A request for the Minister’s authorization shall be accompanied by evidence that the right holder has received, from the person seeking the authorization, a request for a contractual licence but that that person has been unable to obtain such a licence on reasonable commercial terms and conditions and within a reasonable time.
(8)
Decisions of the Minister under this section may be the subject of an appeal to the Court.

Exercise of discretionary powers; extension of time

17.—(1) The Controller shall, before exercising any discretionary power vested in him by this Act adversely to any party to a proceeding before him, give that party an opportunity to be heard.

(2) Where the Controller is satisfied that the circumstances justify it, he may, upon receiving a written request therefor, extend the time for doing any act, other than the time limit set out in sections 3(2) and 7(n( �I>(a), for filing an application, or taking any proceeding under this Act, upon notice to the parties concerned and upon such terms as he may direct and such extension may be granted notwithstanding the time for doing the act or taking the proceeding has expired.

Competence of Court; appeals

18.—(1) The Court shall have jurisdiction in cases of dispute relating to the application of this Act and in matters which, under this Act, are to be referred to the Court.

(2) Any decision taken by the Controller under this Act, in particular the registration of a layout-design, may be the subject of an appeal by any interested party to the Court and such appeal shall be filed within two months of the date of the decision.

Application of international treaties

19. The provisions of any international treaty in respect of intellectual property to which Trinidad and Tobago is a party shall apply to matters dealt with by this Act and, in case of conflict with provisions of this Act, shall prevail over the latter.

Regulations

20. The Minister may make Regulations prescribing all matters that are required or permitted by this Act to be prescribed, or are necessary or convenient to be prescribed for giving effect to the purposes of this Act.

* Short title. Entry into force (of amending Act): June 15, 2000. Source: Communication from the authorities of Trinidad and Tobago. Note: Consolidation by the International Bureau of WIPO.


Законодательство Заменяет (1 текст(ов)) Заменяет (1 текст(ов)) Изменено следующим актом (1 текст(ов)) Изменено следующим актом (1 текст(ов)) Заменено следующим актом (1 текст(ов)) Заменено следующим актом (1 текст(ов))
Данные недоступны.

№ в WIPO Lex TT033